SOUNDPEATS Force Pro Dual Dynamic Drivers Bluetooth Headphones User Manual

soundpeats Force Pro Dual Dynamic Drivers Bluetooth Headphones

Introduction

Thank you for choosing SOUNDPEATS Force Pro Wireless headphones. Please read the manual carefully, and keep it for further reference. If you need any assistance, please contact our customer support team by emailing support@soundpeatsaudio.com

Package Content

1. 1 x SOUNDPEATS Force Pro Bluetooth Headphones
2. 1 x Hanging Hook
3. 1 x Cord Clip
4. 10 x Interchangeable Ear Tips
5. 1 x Charging Cable
6. 1 x Carrying Bag
7. 1 x User Manual

Product Diagram

1. USB Charging Port
2. Volume+/Next Track
3. Multifunctional Button
4. LED Indicator/Microphone
5. Volume-/Previous Track

Specifications

Button Control

Power On| Press and hold the Multifunctional Button for 3s until the led light flashes blue
---|---
Power Off| Press and hold the Multifunctional Button for 3s until the led

light flashes red

Play / Pause| Short press the Multifunctional button
Volume +/-| Short press the +/-button
Play Next/Previous| Long press the +/- button for 2 seconds
Answer Phone Call| Short press the multifunctional Button
Hang Up| Short press the Multifunctional Button in an active call
Reject Phone Call| Press the Multifunctional button for 1.5s
Switch Phone Calls| Double Tap the MFB during a call
Activate Voice Assistant| Double press the Multifunctional button while in playing or

pausing mode

Factory Reset| Press the Multifunction button for 3s when the headset is

charging

LED Indicators

Wearing

1. Identify the right and left earpieces.
2. Choose between the different sized ear fins and tips to find most suitable pair.
3. Put on the earphones and adjust to find best angle.

Get Started

Pairing

1. Power on the headset, press and hold the Multifunctional button for approximate-ly 3 seconds until the LED indicator flashes blue quickly(you will hear the voice prompt “power on” first, just keep holding the multifunctional button ). Now the headset is in pairing mode.

2. Activate the Bluetooth on your device and search for the nearby Bluetooth connection:
   For iPhone/iPad/iPod®: Settings -> Bluetooth -> On
   For Android™: Setting ->Wireless & Networks -> Bluetooth -> On -> Scan for devices For Windows® Phone devices: Settings -> Bluetooth -> On

3. “SOUNDPEATS Force Pro” should be listed in the search result. Select the name to connect. Once connected, the indicator will be solid blue. You will hear a voice prompt“Your headset is connected”.

Notes:

1. Press and hold both volume buttons simultaneously for 3s to have the Force Pro headphones break connection with the device and enter pairing mode.
2. The Force Pro headset will stay in pairing mode for 3 minutes at most if no pairing device is found. Afterwards, it will power off automatically.

Charging

1. Connect the charging port with any USB charging adapter or charging port available. Charging starts automatically with LED indicator turning red and the headset turns off.
2. The headset is fully charged when the LED indicator turns blue.

Notes:
When charging with a USB adapter, the charging current should not be greater than 1A. Please do no use quick charger to charge the headphones.

Care and Maintenance

• Keep the headset away from heat and humidity.
• Do not put the product under direct sunlight or hot areas. High temperatures will shorten lifespan of the headset, battery and / or the internal circuit board.
• Power off the headset when not in use and before storing.
• Do not try to take the product apart.
• Do not drop or knock your headset on hard surfaces.
• Do not use chemicals or detergents to clean the product.
• Do not scrape the surface with sharp objects.

Warranty

We warrant this device 12 MONTHS from date of the original purchase for manufacturer defects.

support@soundpeatsaudio.com www.soundpeatsaudio.com

Please scan the QR code or search the link below for detailed PDF manual.

https://soundpeatsaudio.com/downloads/

Qualcomm
Qualcomm aptX, Qualcomm TrueWireless and Qualcomm cVc are products of Qualcomm Technologies, Inc. and/or its subsidiaries.
Qualcomm and Qualcomm TrueWireless are trademarks of Qualcomm Incorporated, registered in the United States and other countries.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

References

• SOUNDPEATS Wireless Earbuds, Bluetooth Headphones, Speakers for Sound.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>