BEGA 50 608.3 Wall Luminaire Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 50 608.3 Wall Luminaire
Product Information
Product Usage Instructions
Instructions for use
Overvoltage protection
Installation
Cleaning · Maintenance
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 50 608.3 Wall Luminaire

Product Information

Safety: The installation and operation of this luminaire are subject to national safety regulations. Installation andcommissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Overvoltage Protection: The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve additional protection against transients, etc., separate overvoltage protection components are recommended.
They can be found on our website at www.bega.com.
Lamp Module Connected Wattage: 12.4 W
Luminaire Connected Wattage: 14.6 W
Rated Temperature: 25-50°C
Ambient Temperature: 25-50°C
Module Designation: 4x LED-0546/927
Colour Temperature: 2700 K
Colour Rendering Index (CRI): > 90
Module Luminous Flux: 1820 lm
Luminaire Luminous Flux: 1282 lm
Luminaire Luminous Efficiency: 87.8 lm/W

Product Usage Instructions

Ensure that the luminaire is installed and operated in compliance with national safety regulations.
Installation and commissioning should only be carried out by a qualified electrician.
Do not use or install the luminaire improperly, as it may cause damage for which the manufacturer is not liable.
If modifications are made to the luminaire, the person responsible for these modifications will be considered the manufacturer.
To protect against overvoltage and transients, consider using separate overvoltage protection components, which can be found on our website at www.bega.com.
The lamp module connected wattage is 12.4 W.
The luminaire connected wattage is 14.6 W.
The rated temperature for the luminaire is 25-50°C.
The ambient temperature for the luminaire is 25-50°C.
The module designation is 4x LED-0546/927.
The colour temperature of the luminaire is 2700 K.
The colour rendering index (CRI) is greater than 90.
The module luminous flux is 1820 lm.
The luminaire luminous flux is 1282 lm.
The luminaire luminous efficiency is 87.8 lm/W.

Instructions for use

Application
Wall luminaire · indoor luminaire made of hand-blown opal glass, satin matt and metal housing. For all lighting tasks in interior applications. Luminaire with a high protection class.

Product Description

Die-cast aluminium and aluminum housing, finish Chrome
Hand-blown opal glass, satin matt
Silicone gasket 2 mounting holes ø 5.5 mm
Distance apart 440 x 56 mm 2 cable entries for through-wiring for mains cable up to ø 10.5 mm max. 3 × 1.5@ Connection terminal 2.5@
Earth conductor connection
LED power supply unit 220-240 V x 0/50-60 Hz
DC 176-276 V
Safety class I
Protection class IP 44
Protected against granular foreign bodies ≥ 1 mm and splash water
Impact strength IK03
Protection against mechanical impacts < 0.35 joule
- r – Safety mark
- c – Conformity mark
- Weight: 2.2 kg
This product contains light sources of energy efficiency classes D

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at: www.bega.com.

Lamp

Module connected wattage 12.4 W
Luminaire connected wattage 14.6 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 50 °C

50 608.3 K27

Module designation 4x LED-0546/927
Color temperature 2700 K
Color rendering index CRI > 90
Module luminous flux 1820 lm
Luminaire luminous flux 1282 lm
Luminaire luminous efficiency 87,8 lm / W

50 608.3 K3

Module designation 4x LED-0546/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 1880 lm
Luminaire luminous flux 1325 lm
Lum i naire luminous efficiency 90,8 lm / W

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
Loosen the screw of the lateral cover and take off the glass from the luminaire housing.
Lead mains supply cable through the cable entry into the luminaire housing.
Fix the luminaire housing with enclosed or any other suitable fixing material onto the mounting surface.
It is imperative to use the enclosed gaskets. Make an earth conductor connection.
Push silicone sleeves over the lines and make an electrical connection.
Position the glass into the base plate and fix it with the screw and the cover.

Cleaning · Maintenance

Clean the luminaire regularly with solvent-free cleansers from dirt.
The defective glass must be replaced.
Replacement of the LED module
The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
The defective glass must be replaced.
Close the luminaire.

Spares