FERRET CFWF50S Sweeps Wireless Inspection Camera User Guide
- June 6, 2024
- FERRET
Table of Contents
Ferret Repeater
Configuration Guide
Configuration is required to pair your Ferret Repeater with your Ferret Sweeps
camera prior to use
Welcome to the Ferret Community! Thank you for choosing the Ferret Sweeps
camera
Share on social.
The Ferret community would love to see how the Ferret is being used on the job or at home and how the Ferret has come to your rescue!
Please share and tag us on social.
Follow us on @FerretTools
Official hashtag #FerretTools
Ferret Repeater Model CFR300A
Version 2.3 © 2021
1 yr Manufacturer’s Warranty www.ferrettools.com
Made in PRC
Setting Up Your Ferret Repeater
Note: Configuration is required to pair your Ferret Repeater with your Ferret Sweeps camera prior to use.
- Plug the Repeater into a power bank to power up. WiFi indicator LED will be green.
- Open the WiFi Settings on your smartphone or tablet and select the “Ferret-Repeater-XXXX” SSID.
- Once connected, open an internet browser on your smartphone or tablet and enter the address 10.10.10.254. The Ferret Repeater Configuration Page will open up.
- Switch on your Ferret Sweeps camera.
- Scroll to the bottom of the page and tap SCAN NOW.
- Find your Ferret camera’s SSID “Ferret-WiFi-XXXX” and tap “Select”. In this example, the Ferret camera’s SSID is “Ferret-WiFi-DC21”
- Tap “Next”
- Tap “Confirm”
- Wait for the “Configuration Successful” message.
- After approximately 30 seconds, the green WiFi Indication LED will turn Blue confirming your Ferret Repeater has been configured.
- Go to the WiFi Settings on your phone, select the SSID “Ferret-WiFiXXXX_RPT “. Check that you’re connecting to the SSID with “RPT” in the name (for the Ferret Repeater). Ferret-WiFi-DC21_RPT in the example below.
- Open your Ferret WiFi App. Your phone is now connected to your Ferret camera via the Ferret Repeater.
NOTE: The Ferret Repeater will only need to be reconfigured if you need it to connect to a different Ferret camera.
Specifications
Model: CFR300A
Dimensions: 85 x 25 x 9mm
Frequency: 2.4GHz
Signal Rate: Up to 300Mpbs
Transmit Power: < 18dBm
Operating Voltage: 5V DC
Warranty
Your Ferret Repeater comes with a 12-month replacement warranty. In the
unlikely event that your Ferret Repeater develops a fault within 12 months of
purchase, please email
support@ferrettools.com or return it to your
place of purchase with proof of purchase. Failure due to physical damage,
misuse, neglect, improper use, or moisture is not covered. The Ferret Repeater
has no user-serviceable parts inside. Disassembly will void the warranty.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>