BOYI GMK67-65 Keyboard Kit Instruction Manual
- June 1, 2024
- BOYI
Table of Contents
GMK67-65 Keyboard Kit
| Combination | Function |
|---|---|
| FN+ESC | ~ |
| FN+1 | F1 |
| FN+2 | F2 |
| FN+3 | F3 |
| FN+4 | F4 |
| FN+5 | F5 |
| FN+6 | F6 |
| FN+7 | F7 |
| FN+8 | F8 |
| FN+9 | F9 |
| FN+0 | F10 |
| FN+- | F11 |
| FN+= | F12 |
| FN+U | PRT SCR |
| FN+I | Scrlk |
| FN+P | Switch to different light color |
| FN+[ | Decrease Brightness |
| FN+] | Increase Brightness |
| FN+| Switch to different light mode | |
| FN+A | Pause/Play |
| FN+S | Previous song |
| FN+D | Next song |
| FN+F | Mute |
| FN+G | Volume up |
| FN+H | Volume down |
| FN+J | INS |
| FN+K | HOME |
| FN+; | Decrease LED speed |
| FN+’ | Increase LED speed |
| FN+Pause | 2.4G wireless mode connection |
| FN+Pg Up | Turn on/off all backlit |
| FN+Pg dn | Switch to custom backlit mode |
| FN+Z | Bluetooth device 1 |
| FN+X | Bluetooth device 2 |
| FN+C | Bluetooth device 3 |
| FN+, | END |
| FN+Win | Lock the WIN |
| Ctrl+Alt+Q | Reset to factory defaults |
Product Name: BOYI GMK67-65 Keyboard Kit
How to use this Keyboard:
1.1.1 Power Indicator Light: Lithium battery(3.7V):If the battery voltage
is lower than 3.3V,the red indicator light of the keyboard will flash. The red
indicator light is on when charging and off when fully charged.
1.1.2 2.4G wireless mode connection: After the keyboard is turned on,
long press “FN+Pause” combination keys 3 seconds and the indicator light will
flash quickly. If the indicator keeps on for 10 seconds after plugging in the
receiver, keyboard is connected in this mode.
1.1.3 Bluetooth mode connection: Long press “FN+Z/X/C” combination keys 3
seconds, the indicator will flash quickly. If the indicator keeps on for 10
seconds after connecting your device, the keyboard is connected in this mode.
If the keyboard isn’t connected, the indicator goes out and the keyboard will
go into the sleep mode.
1.1.5 Backlit modes: Press “FN+\” combination keys to switch the keyboard
backlit modes. Backlit mode order: light wave(default),normal, breath, ripple,
light rain, serpentine, follow, polymerization, neon, laser, sine wave, RGB
wave, aurora wave, light flowers, colorful spring surging.
The function of “FN+Pg Up” combination keys is turn on/off all backlit. And
press “FN+Pg dn” combination keys to switch to the custom backlit mode. The
default backlit mode is inverted triangle lighting effect. Adjusting the
custom backlit needs to use the keyboard drive.
The normal backlit mode can’t adjust the light speed, neon and RGB wave
backlit mode can’t adjust the light color. Other backlit modes can adjust
different light speed, brightness and color. There are 7 levels of the
brightness and its default is maximum brightness. There are 5 levels of the
speed and its default is the third level. Color order: multicolor, ice blue,
red, green, blue, orange, purple, yellow.
1.1.6 Keyboard display name:
Product Model: BOYI GMK67 2.4G
mode:2.4G Wireless Device
BT3.0 mode:BT3.0 KB
BT5.0 mode:BT5.0 KB
1.1.7 Operating distance: >10m 360° (under external environment
interference)
1.1.8 Bluetooth connection back time: ≤5s
1.1.9 Compatibility:
Bluetooth: Compatible with all Bluetooth Dongle on the market, notebook built-
in Bluetooth module. Bluetooth 5.0 mode needs to support Windows 8 or above,
tablets and mobile phones, etc. 2.4G:According to USB standard protocol,
compatible with Windows2000 and MAC.
1.1.10 Electrical parameters (for reference only)
| Charging current | 540-580mA |
|---|---|
| Wired normal mode current | 110.2mA |
| 2.4G normal mode current | 200.0mA |
| 2.4G sleep mode current | 0.14mA |
| Bluetooth 3.0 normal mode current | 183.5mA |
| Bluetooth 3.0 sleep mode current | 0.14mA |
| Bluetooth 5.0 normal mode current | 182.6mA |
| Bluetooth 5.0 sleep mode current | 0.14mA |
| No backlit current | 39.8mA |
1.1.11 NKRO: all the connection mode and connected devices support anti-
ghosting.
1.1.12 Working voltage:3.7V
1.1.13 Connection mode:wired,2.4G,Bluetooth 3.0,Bluetooth 5.0
1.1.14 RF power:30dbm
1.1.15 Working frequency:2405/2440/2475
1.1.16 System requirements
| Port | USB |
|---|---|
| Compatible system | Windows2000 or above, MAC, BLE support Windows 8 or above |
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The
device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>