BEGA 89766 Ceiling and Wall Luminaire for Indoor Use Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 89766 Ceiling and Wall Luminaire for Indoor Use
Product Information
Product Usage Instructions
Instructions for use
DIMENSION
Product Description
Installation
Relamping Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 89766 Ceiling and Wall Luminaire for Indoor Use

Product Information

Model Number: 89 766
IP Rating: IP44
Dimensions: 25 x 75 x 130 mm
Weight: 360 grams
Color: Bottom (unten), Bottom (bottom), Dessous (dessous)
Operating Efficiency of Luminaire: 53%

Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Product Usage Instructions

Safety: The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Spares:

Spare Glass
LED Lamp 2700 K
LED Lamp 3000 K
Lampholder
Reflector

For specific spare part codes, please refer to the following:

11 002 772 .0R G
13 548
13 586
63 000 355
76 000 835

For LED Lamp 2700 K, please refer to:

11 002 772 .0R G
13 548
13 586
63 000 355
76 000 835

Instructions for use

Application

Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass, satin matt and metal housing, for all lighting tasks.
They are ideal for places where a soft and uniform lighting distribution is required. Luminaire with a high protection class.

DIMENSION

$BEGA-89766-Ceiling-and Wall-Luminaire-for-Indoor-Use-fig- $1$$

Lamp

Luminaire with screw base E 27
Lamp output max. 3 × 60 W
This product contains light sources of energy efficiency class E

Supplied lamp

3 × BEGA LED lamp 13548
LED Retrofit 7 W · 805 lm · 2700 K dimmable

Supplied lamp

3 × BEGA LED lamp 13586
LED Retrofit 7 W · 805 lm · 3000 K dimmable
Luminaire efficiency: 53%
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Product Description

Metal housing, finish colour white
Hand-blown opal glass, satin matt, with sliding-bolt closure
2 mounting holes ø 5.5 mm
Distance apart 280 mm
2 cable entries for through-wiring for mains cable up to ø 10.5 mm max. 3 × 1.5@ Connection terminal 2.5@
Earth conductor connection
Lampholder E 27
Safety class I
Protection class IP 44
Protected against granular foreign bodies
≥ 1 mm and splash water
Impact strength IK04
Protection against mechanical impacts < 0.5 joule
Safety mark
Conformity mark
Weight: 4.8 kg

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Installation

Pass the main supply cable through the base plate.
Notice the position of the application »arrow down« when installed at the wall.
Fix the base of the luminaire with enclosed or any other suitable fixing material onto the mounting surface.
It is imperative to use the enclosed gaskets. Make an earth conductor connection.
Push silicone sleeves over the lines and make an electrical connection.

Insert lamps.

The sliding-bolt closure provides a safe and vibration-resistant holding of glass.
Place glass to the base plate and observe that the holding spring bolts fit into the notches of the glass.
Insert the opal glass into the luminaire base with sliding bolt glass closure and turn the glass clockwise until it is locked.
To release the glass from the base plate, turn it counterclockwise.

Relamping Maintenance

Disconnect the electrical installation.
To release the glass from the housing, turn it counterclockwise.
Clean luminaire and glass.
Use only solvent-free cleansers.
Change the lamp.
The sliding-bolt closure provides a safe and vibration-resistant holding of glass.
Place glass to the housing and observe that the holding spring bolts fit into the notches of the glass.
Turn the glass clockwise until it is locked.

Spares