BEGA 38 302 Light Brick Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 38 302 Light Brick
Product Information
Product Usage Instructions:
Instructions for use
DIMENSION
FEATURES
Product Description
Safety
Installation
Replacing the LED module
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 38 302 Light Brick

Product Information

Product Name: Luminaire
Model Number: 38 302 K3
Power: 28 W
IP Rating: IP 44
Colour Temperature: 3000 K
Colour Rendering Index: 3R0a4>0
Luminous Flux: Module – 80 lm, Luminaire – 2348 lm
Luminous Efficiency: 83.9 lm/W

Product Usage Instructions:

Safety
The installation and operation of this luminaire are subject to national safety regulations. Only a qualified electrician should perform the installation and commissioning. The manufacturer does not accept liability for any damage caused by improper use or installation. If any modifications are made to the luminaire, the person responsible for these modifications will be considered the manufacturer.

Spares:
If you require any spares, the following items are available:

Spare Glass: LED-1246/830
LED Module: 3000 K (Model Number: 11 002 160 .0)

Please ensure that you have the necessary spare parts before proceeding with any repairs or replacements.
Note : For detailed instructions on how to replace the spare parts, please refer to the complete user manual.

Instructions for use

Application Lichtbaustein® Square

Ceiling and wall luminaire for many lighting tasks.
Ideal for places where a soft and uniform lighting distribution is required

DIMENSION

$BEGA-38-302-Light-Brick-fig- $1$$

FEATURES

Lamp

Luminaire connected wattage 28 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 35 °C

38 302 K3

Module designation 2x LED-0608/830
Colour temperature 3000 K
Colour rendering index Ra > 80
Module luminous flux 3040 lm
Luminaire luminous flux 2348 lm
Luminaire luminous efficiency 83,9 lm / W

Product Description

Luminaire made of aluminium alloy and stainless steel
BEGA Unidure® coating technology
Opal glass satin matt
2 mounting holes ø 5.2 mm
Distance apart 120 mm
2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm
4 prefabricated cable ducts for surface-mounted mains supply cables
Connecting terminal and earth conductor terminal 2.5@
LED module for power supply
Suitable for phase angle or phase section dimming
220-230 V y 50/60 Hz
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Protection class IP 44
Protected against granular foreign bodies
≥ 1 mm and splash water
Impact strength IK06
Protection against mechanical impacts < 1 joule
Safety mark
Conformity mark
Weight: 4.0 kg
This product contains light sources of energy efficiency classes F

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Installation

LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during installation or relamping.
Lead the mains supply cable through the cable entry of the luminaire base.
Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
Be sure to use the gasket rings supplied.
Make the earth conductor connection and the electrical connection.
Disassemble the rod safety clamps.
Insert the opal glass into lower spring clips, centralise it and push into the upper spring clips.
Assemble the rod safety clamps.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by a qualified electrician or a comparably qualified person using standard tools.
Disconnect the electrical installation.
Disassemble the rod safety clamps.
Pull glass out of the upper spring clips and remove it from the luminaire back housing.
Clean the glass and luminaire housing using only suitable cleansers.
When cleaning please do not use high-pressure cleaners.
Please follow the installation instructions for the LED module.
A broken glass must be replaced.
Place the opal glass onto the back housing.
Assemble the rod safety clamps