AKLFGN BF-021-DP Single Hole Single Handle Low Arc Bathroom Faucet User Manual
- June 17, 2024
- AKLFGN
Table of Contents
AKLFGN BF-021-DP Single Hole Single Handle Low Arc Bathroom Faucet
- Thank you for purchasing our bathroom faucet
- Please read this manual carefully before you install it
- Please keep this model properly for reference in the future
Read all instructions before installation.
CAUTION
Failure to read these instructions before installation may result in personal
injury, property damage, or product failure. The manufacturer assumes no
responsibility for product failure due to improper installation.
Product Overview
You may need
Installation
- Slade gasket line grove on the item as a sauce (1).
- Install the shank (5) with phillips screwdriver.
- Slide supply lines (8) and shank (5) through the sink from above, then slide the shank (5) through the hole of the rubber washer (3), then slide the shank (5) through the hole in the metal washer (4).
- Ensure the base is aligned with the sink, fully tightening the mounting nut (6) using a wrench (9).
- If the sink has three holes, slide supply lines (8) and shank (5) through deck plate (7) and sink from above, then slide the shank (5) through the hole of rubber washer (3), then slide the shank (5) through the hole of metal washer (4).
Ensure the base is aligned with the sink, fully tightening the mounting nut (6) using a wrench (9).- If the thread of the angle valve is 3/8″, thread hot and cold supply lines (8) to angle valves using a wrench.
- If the thread of the angle valve is 1/2″, the first thread of the transform adapters (10) (transform 1/2″ male thread to 3/8″ male thread) to angle valves using a wrench, then thread hot and cold supply lines (8) to transform adapters (10).
- Turn on both water supplies at angle stops and the faucet handle, and check for leaks at all connections made during this installation, Refer back to the appropriate installation instructions and retighten if necessary.
Read User Manual Online (PDF format)
Loading......