ViaBecs SYFT7210 Android 12 Car Stereo Installation Guide

Installation Guide for SYFT7210 Highlander Radio

If you have any questions, please contact us for help.

1. Installation Video

STEP 1: How to install the ViaBecs Highlander radio.
https://www.youtube.com/watch?v=pQ8s45cqUWM

2. Check Your Factory Radio

Model Number: SYFT7210

Model A:

2014-2019 Toyota Highlander

Compatibility with Original functionality: with JBL Amplifier, with backup camera or 360 camera, A/C info,
USB Cable. TPMS info.
Proper Wiring Harness: CAN004-X (No included)
Note: The No.5 & 6 port is the Camera Connector. Only connect one of them.

1. USB Adapter

3. Connect CAN004-X harness with factory harness

Note: don’t need to connect all factory connector. Some functions will lost after you removed the factory radio.

But our wiring harness can support factory backup camera, JBL AMP, Factory USB and SWC etc.

CAN004-X-SW

1. Canbus box
2. Red: Male AUX R OUT to Female AUX R IN
3. White: Male AUX L OUT to Female AUX L IN
4. Male rear camera (16PIN)
5. Male rear camera (24PIN)
6. 10PIN CAM VIN & Wifi Line
7. 8PIN Canbus Port
8. 4PIN USB adapter
9. FM/AM Radio Antenna

Note: You need to connect one of No.4 or
No.5 male rear camera lines.

STEP 1: How to connect factory backup camera
S1: You need to connect the yellow male camera RCA of No.8 Or No.11 CAMERA Connector   ( CAN004-X ) with the PIN10 Rear CAM VIN.
Note: It is a Nissan Wiring harness in the picture. It is as a reference.

Only connect the male RCA camera line with 10PIN female line

1. 24PIN CAMERA CONNECTOR

2. 16PIN CAMERA CONNECTOR

3. 2. Connect Factory Backup Camera
   • Connect the Yellow RCA Male CAM VIN line of the harness with 10 PIN RCA Female CAM-IN line

4. RCA Male CAM VIN

5. RCA Female CAM-IN

6. 10 PIN

STEP 2: Set up the options for Canbus
S1: connect the head unit with your Phone hotspot or wifi first.
Press Car Settings — Factory — Select Models — password is 123456 — Model choose.
S2: Choose CanBox Brand: 03: Simple Soft — 30:Toyota– 14:Models: All New Highlander — Config: Public
Finally, press ok to save the settings. Then the head unit will update it automatically.
Here is the video as a reference.
Video: Set up canbus option on TS10 Radio

https://www.youtube.com/watch?v=PKbGqFFcCAc&t=51s

4. Radio Wiring Diagram

Device Ports

1. GPS Antenna
2. Radio antenna
3. Backup Camera
4. 6pin Usb Cable
5. 4pin Usb Cable
6. Canbus Port
7. 4g Antenna
8. 360 Camera (Optional)
9. Audio Cable
10. Power Cable

1 : 4PIN USB Input
2 : 6PIN USB Input
3 : FR Audio Output
4 : RR Audio Output
5 : FL Audio Output
6 : RL Audio Output
7 : AUX R Input
8 : AUX L Input
9 : 12V+ AMP CONT
10 : 4G SIM Slot
11 : External MIC
12 : Video Input 1
13 : Video Input 2
14 : SUB Output
15 : Rear CAM VIN
16 : Wifi Antenna
17 : Radio Antenna
18 : GPS Antenna
19 : 4G Antenna
20 : 16PIN Power Port

A: Audio cable
B: 360 camera
C: CANBUS port
D: USB cable
E: USB cable
F: rear camera and Wifi

STEP 1: How to connect aftermarket backup camera
video: How to wire a Backup Camera
https://www.youtube.com/watch?v=NBKY6S4d5QY

How to Install Aftermarket Reverse Camera

1. RCA CAM / Video IN (Head Unit)
2. Reverse / Back Line (Head Unit)
3. Reverse Lamp Power
4. Black to GND
5. Red to Power 12+

STEP 2: Set Camera Format
Problem: Why my backup camera image is black when I put the car in reverse?
Please confirm the resolution of your camera first.

1. If your camera is not HD, please choose normal — SD — NTSC/PAL.
2. if your camera is HD version, please choose the normal — HD — AHD 720P/25fps, or AHD a 1080P/25fps.
   Then test the camera again after you change the camera format.

5. TS10 Head Unit FAQs

Q1: What is the Factory Setting Password?

The password is: 123456

Q2: What is the Reset factory?

The password is: 7890

Q3: How to change the KPH to MPH?

Please click Theme app — Setting — Plugin –Speed Unit
You can change to KPH to MPH
How To Change Car Launcher Theme In ViaBecs Car Stereo
Video:https://www.youtube.com/watch?v=HXSWJOeRbew

Q4: How do i update the ViaBecs TS10 software?

You can update the system and MCU online.
Please connect your home wifi first.
and then open the car setting app — about — Detection Update.
Video:https://www.youtube.com/watch?v=0BABIjvTllw

Q5: How to activate Tlink for Apple car play & Android Auto?

How to Connect and Use Wireless Apple Carplay on ViaBecs TS10 Radio
Video:https://www.youtube.com/watch?v=gizPQ1wS7aA

S1. You need to connect wifi to activate Tlink when you use it at the first.
How to find the wifi.
Please drop down Quick Setting Menu.
B And then a long-press wifi icon to turn on it.
and then you can try to connect your phone hotspot first.
Note: Please clear the Tlink usage record first.

S2. if Tlink still asks you to put the auth_key, please take a clear photo of the QR activating code and then send me.
and then my engineer will activate it after scanning the code.

1. Please click “About” on the Tlink app
2. Choose the first option (Wireless Carplay + Wireless Android Auto + Wired Android Auto) Then click the “refresh” to get the new QR code
3. Take a photo and send it to me
   Note: the code will be invalid if the time is too long.
   and then our engineer will scan the QR code to activate it.

Q6: How To Change Boot Logo On ViaBecs Android Head unit Car Stereo?

Video:https://www.youtube.com/watch?v=izVcfczZK7U

Q7: How to remap panel button on ViaBecs car stereo?

Video:https://www.youtube.com/watch?v=V05wCEH2NRU

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>