BEGA 24 148 Ceiling and Wall Luminaire Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 24 148 Ceiling and Wall Luminaire
Product Information
Product Usage Instructions
Instructions for use
DIMENSION
Product Description
Safety
FEATURES
Installation
Cleaning Maintenance
Spares
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 24 148 Ceiling and Wall Luminaire

BEGA-24-148-Ceiling-and-Wall-Luminaire-PRODUCT

Product Information

Product Name| Decken- und Wandleuchte Ceiling and wall luminaire Plafonnier
et applique
---|---
Protection Class| IP 65
Material| Aluminium alloy, aluminium, stainless steel, crystal glass
Weight| 1.4 kg
Safety Class| I p Ballproof according to DIN VDE 0710 part 13
Impact Strength| IK07
Energy Efficiency Classes| C, D

Product Usage Instructions

The Decken- und Wandleuchte is a high-protection class luminaire suitable for both ceiling and wall mounting. It is designed to provide unshielded lighting and is made of durable materials such as aluminium alloy, aluminium, stainless steel, and crystal glass.
The luminaire has a protection class of IP 65, making it dust-tight and protected against water jets. It also has an impact strength of IK07, ensuring resistance against mechanical damage.
Before installing and commissioning the luminaire, it is important to follow national safety regulations. Only a qualified electrician should carry out the installation and operation. The manufacturer does not accept liability for any damage caused by improper use or installation. If any modifications are made to the luminaire, the person responsible for these modifications will be considered the manufacturer.
The luminaire is powered by an LED power supply with a voltage range of 220-240 V and a frequency range of 50-60 Hz. The connected wattage for the lamp module is 7 W and for the luminaire is 8.1 W. The rated temperature and ambient temperature should be taken into consideration during operation.
The Decken- und Wandleuchte is available in different module designations, each with different colour temperatures, colour rendering index, module luminous flux, luminaire luminous flux, and luminaire luminous efficiency. Please refer to the table below for specific details:

Module Designation| Colour Temperature| Colour Rendering Index| Module Luminous Flux| Luminaire Luminous Flux| Luminaire Luminous Efficiency
---|---|---|---|---|---
LED-0954/830| 3000 K| CRI > 80| 1160 lm| 838 lm| 103.5 lm / W
LED-0954/840| 4000 K| CRI > 80| 1220 lm| 881 lm| 108.8 lm / W

Instructions for use

Application

Unshielded ceiling and wall luminaire with high protection class.
A luminaire made of aluminium alloy and crystal glass.

DIMENSION

$BEGA-24-148-Ceiling-and-Wall-Luminaire-FIG- $1$$

Product Description

Luminaire made of aluminium alloy, aluminium and stainless steel
BEGA Unidure® coating technology
Crystal glass, white inside
Silicone gasket
2 mounting holes ø 4.5 mm
Distance apart 178 mm
2 cable entries for through-wiring of mains supply cable ø 7-12 mm
Connection terminal 2.5@
Earth conductor connection
BEGA Ultimate Driver®
LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-264 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Ballproof according to DIN VDE 0710 part 13
Protection class IP 65
Dust-tight and protection against water jets Impact strength IK07
Protection against mechanical
impacts < 2 joule
Safety mark
Conformity mark
Weight: 1.4 kg
This product contains light sources of energy efficiency classes C, D

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

FEATURES

Lamp

Module connected wattage 7 W
Luminaire connected wattage 8.1 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 45 °C

24 148 K3

Module designation LED-0954/830
Colour temperature 3000 K
Colour rendering index CRI > 80
Module luminous flux 1160 lm
Luminaire luminous flux 838 lm
Luminaire luminous efficiency 103,5 lm / W

24 148 K4

Module designation LED-0954/840
Colour temperature 4000 K
Colour rendering index CRI > 80
Module luminous flux 1220 lm
Luminaire luminous flux 881 lm
Luminaire luminous efficiency 108,8 lm / W

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
Undo hexagon socket head screw (wrench size 3 mm) through the opening in the luminaire housing up to the stop and lift luminaire top. Disconnect plug connection.
Lead the mains supply cable through the cable entry of the luminaire base.
Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
Tighten screw cable gland.
Make the earth conductor connection and the electrical connection.
In order to guarantee the maximum service life of the electrical components, the enclosed desiccant pouch must be placed in the luminaire.
Remove the desiccant pouch from the foil packaging and place it in the position marked by the red information label immediately before finally closing the luminaire.
Make earth conductor connection between luminaire top and luminaire base.
Push plug into coupler as far as it will go. Make sure that gasket is positioned correctly. To ensure the tightness of the luminaire, place the upper part of the luminaire so that the fixing screw is at the level of the arrow marking on the lower part of the luminaire.
Tighten grub screw firmly.

Cleaning Maintenance

Clean the luminaire regularly with solvent-free cleansers from dirt and deposits.
Do not use high-pressure cleaners.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
The defective glass must be replaced.
Close the luminaire.