BEGA 50716.2 LED Recessed Ceiling Luminaire for Indoor Use Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 50716.2 LED Recessed Ceiling Luminaire for Indoor Use
Product Information
Product Usage Instructions
Instructions for use
DIMENSION
Product Description
Safety
FEATURES
Installation
Cleaning Maintenance
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 50716.2 LED Recessed Ceiling Luminaire for Indoor Use

Product Information

The product is a luminaire with a die-cast aluminium housing and hand-blown opal glass. The glass has a satin matte finish and is attached to the housing with a screw neck. The luminaire features two adjustable wedge-shaped claws for fixing.
The product contains light sources that belong to energy efficiency class D. It is designed for indoor use.

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.

Product Usage Instructions

Safety:

The installation and operation of this luminaire must comply with national safety regulations.
Installation and commissioning should only be carried out by a qualified electrician.
The manufacturer is not liable for any damage caused by improper use or installation.
If modifications are made to the luminaire, the person responsible for these modifications is considered the manufacturer.

Overvoltage Protection:

To achieve additional protection against transients and other overvoltage events, it is recommended to use separate overvoltage protection components. These can be found on the manufacturer’s website at www.bega.com.

Lamp Information:

Lamp Module| Connected Wattage| Colour Temperature| Colour Rendering Index (CRI)| Module Luminous Flux| Luminaire Luminous Flux| Luminaire Luminous Efficiency
---|---|---|---|---|---|---
LED-0922/927| 5.8 W| 2700 K| CRI > 90| 890 lm| 632 lm| 85.4 lm/W
LED-0922/930| 7.4 W| 3000 K| CRI > 90| 915 lm| 650 lm| 87.8 lm/W

Installation:

LEDs are high-quality electronic components. Avoid touching the light output opening of the LED directly during installation or relamping.
The electrical connection must be made by a qualified electrician using appropriate protective measures and the connection cable of the LED power supply.
A distribution box is required. Ensure correct wiring of the connection cable. Connect the mains supply to the brown (L) and blue (N) wires.

Instructions for use

Application

Recessed ceiling luminaire · indoor luminaire with hand-blown opal glass, satin matt and aluminium alloy housing.
For installation into ceilings with a shallow depth in interior areas

DIMENSION

$BEGA-50716-2-LED-Recessed-Ceiling-Luminaire-for-Indoor-Use- FIG- $1$$

Product Description

Recessed ceiling luminaire »ACCENTA«
Die-cast aluminium housing
Hand-blown opal glass, satin matt, with screw neck
Ceiling frame ring made of stainless steel
Recessed opening ø 68 mm
Required installation depth 60 mm
Fixing is achieved by using 2 adjustable
wedge-shaped claws
External LED power supply unit
220-240 V x 0/50-60 Hz
Safety class II 2
Safety mark
Conformity mark
Weight: 0.39 kg
This product contains light sources of energy efficiency class(es) D

Safety

The installation and operation of this luminaire are subject to national safety regulations.
Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation.
If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

FEATURES

Lamp

Module connected wattage 5.8 W
Luminaire connected wattage 7.4 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 45 °C
When installed in heat-insulating material ta max = 35 °C

50 716.2 K27

Module designation LED-0922/927
Colour temperature 2700 K
Colour rendering index CRI > 90
Module luminous flux 890 lm
Luminaire luminous flux 632 lm
Luminaire luminous efficiency 85,4 lm / W

50 716.2 K3

Module designation LED-0922/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 915 lm
Luminaire luminous flux 650 lm
Luminaire luminous efficiency 87,8 lm / W

Installation

LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during installation or relamping.
The recessed opening will be covered by the frame of the luminaire.
Fixing of the luminaire is achieved by using 2 adjustable wedge-shaped claws

Installation into false ceilings

A recessed opening of ø 68 mm is necessary to accept the luminaire housing. Free space depth min. 60 mm (see sketch).
The claws catch the panel from the reverse side. If minimum thickness of the panel is less than 3 mm it must be reinforced from the reverse side. Maximum thickness of the panel must be no more than 20 mm.
The electrical connection must be made on site in the appropriate safety class on the LED power supply unit connecting cable. A distribution box must be used.
Ensure the correct assignment of the connecting cable. Establish the mains connection on the brown (L) and blue (N) wires.
Push external LED-power supply unit and luminaire housing into ceiling cut-out.
Hand-tight screws of claw fasteners evenly.
Lead enclosed ceiling frame ring over the screw-neck of the glass and push it down the gasket.
Make sure that gasket is positioned correctly.
Insert glass with frame ring by turning it clockwise into luminaire housing.

Cleaning Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt.
Defective glass must be replaced.

Replacement of the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The module can be replaced by qualified persons using standard tools.
Disconnect from main supply.
Unscrew glass with ceiling frame ring from luminaire housing by turning it counterclockwise.
Please follow the installation instructions for the LED module.
Check gasket. Screw in glass with ceiling frame ring by turning it clockwise beyond the stop.
Defective glass must be replaced

Spares