BEGA 51054.1 Indoor Track Spotlight Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 51054.1 Indoor Track Spotlight
Product Usage Instructions
Instructions for use
Product Description
Safety
Installation
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 51054.1 Indoor Track Spotlight

Product Information:

Product Name: Luminaire
Model Number: 51 054.1 K3
Lamp Type: LED-1222/930
Colour Temperature: 3000 K
Colour Rendering Index (CRI): > 90
Module Luminous Flux: 2670 lm
Luminaire Luminous Flux: 1505 lm
Luminaire Luminous Efficiency: 60.2 lm / W
Connected Wattage: 21.6 W
Rated Temperature: Not specified
Ambient Temperature: Not specified
Service Life Criteria: Not specified

Product Usage Instructions

Safety: – The installation and operation of this luminaire must comply with national safety regulations. – Installation and commissioning should only be carried out by a qualified electrician. – The manufacturer is not liable for any damage caused by improper use or installation. – Any modifications made to the luminaire should be done by a responsible person who will be considered the manufacturer.
Overvoltage Protection: – The electronic components in the luminaire are protected against overvoltage according to DIN EN 61547. – For additional protection against transients, it is recommended to use separate overvoltage protection components available on the manufacturer’s website
Luminaire Specifications: – The luminaire operates with an LED lamp module. – The connected wattage is 21.6 W. – The rated temperature and ambient temperature are not specified. – The service life criteria are not specified.
Luminaire Operation: – Place the surface washer adapter flush on the conductor rail in the desired position. – Push the two fixing levers on the underside of the adapter to the right until they click into their end position. – Set the desired LED beam direction by turning and tilting the luminaire housing. – To unlock the adapter, move the two fixing levers in opposite directions until they disengage.
Spare Parts: – LED Power Supply Unit: DEV-0437/700i – LED Module 3000 K: LED-1222/930 – LED Module 4000 K: LED-1222/940 – Trim Frame with Glass: 75 004 899 – Reflector: 76 001 548
Note: The user manual does not provide detailed instructions on the usage of spare parts. Please refer to the manufacturer’s instructions or contact their customer support for assistance with spare parts installation and replacement.

Track spotlight for indoor use

Instructions for use

Application
Ceiling mounted track spotlight · indoor luminaire for 3-phase Eurostandard- Plus® track systems.
The optical system of the washer is swivel-mounted and rotatable.
Asymmetrical wide beam light distribution.

Product Description

Track spotlight with adapter
Cast aluminium luminaire housing, finish Colour velvet white,
Polycarbonate track adapter with integrated LED power supply unit
Safety glass with optical texture
Reflector surface made of pure aluminium BEGA Vortex Optics® .
Light-diffusing synthetic LED cover
LED power supply unit
220-240 V y 50/60 Hz
DALI-controllable
Number of DALI addresses: 1
Basic insulation is provided between the mains and control cables
Safety class II
– Conformity mark
Weight: 0.65 kg

This product contains light sources of energy efficiency class(es) E

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

Lamp

Module connected wattage 21.6 W
Luminaire connected wattage 25 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 30 °C
Service life criteria 50 000 h / L70

51 054.1 K3

Module designation LED-1222/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 2670 lm
Luminaire luminous flux 1505 lm
Luminaire luminous efficiency 60,2 lm / W

51 054.1 K4

Module designation LED-1222/940
Colour temperature 4000 K
Colour rendering index CRI > 90
Module luminous flux 2770 lm
Luminaire luminous flux 1561 lm
Luminaire luminous efficiency 62,4 lm / W

Light technique

Track spot · surface washer with adjustable optical system.
Optical system 0-340° swivel-mounted and ± 310° infinitely rotatable around the vertical luminaire axis.
Asymmetrical wide beam light distribution. Half beam angle 47/45°

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
The track spotlight with adapter is ready for operation in 3-phase EUROSTANDARD-PLUS® track systems.
The mounting is done without tools in the bus bar.

IMPORTANT:

Ensure that the adapter’s two lateral stays are located on the same side as the matching guide profile of the track before installing the adapter in the 3-phase EUROSTANDARD-PLUS® track system.
To select the phase ( 1 2 3 ) the turning knob on the rear side of the adapter has to be operated accordingly.
Place the surface washer adapter flush on the conductor rail in the desired position.
Push the two fixing levers on the underside of the adapter to the right until they click into their end position.
Set the desired LED beam direction by turning and tilting the luminaire housing.
Move the two fixing levers in opposite directions until they disengage to unlock the adapter.

Cleaning · Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted. The replacement can be carried out by a qualified person using standard tools.
Disconnect the system and open the luminaire. Uninstall the reflector.
Please follow the installation instructions for the LED module.
Install the reflector. Defective glass must be replaced. Close the luminaire.

Spares