CLEVERIO 47069 Heated Gilet User Manual
- June 6, 2024
- Cleverio
Table of Contents
CLEVERIO 47069 Heated Gilet
Specifications
Use
- Connect the USB cable located in the left inner pocket to the included Turn the powerbank on and put it in the same pocket.
- Press the button on the front of the gilet for 3-5 seconds. The button lights up.
- Press the button repeatedly to switch between three temperature modes. The button lights up in red, white or blue, which indicates high, mid and low Red button: 55 °C. White button: 50 °C. Blue button: 45 °C.
- Turn off the heat by pressing the button for a few seconds. Disconnect the powerbank when you are done using the gilet.
Charging
Charge the powerbank with a Micro-USB cable. Connect the cable to the charging port of the powerbank and a computer or a USB power adapter.
Cleaning
- Hand wash only.
- Wash separately in 30 °C.
- Remove the powerbank and close the zippers before washing the gilet.
- Do not dry clean, tumble dry, bleach or wring. Do not iron
Safety information
- Use only the supplied powerbank to power the gilet.
- Disconnect the powerbank from the gilet when the gilet is not in use.
- This garment is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they are supervised or have received instructions concerning the use of the garment by a person responsible for their safety. Children should be supervised to ensure that they do not play with the garment.
- Do not use the gilet close to open fire or near heat sources. The gilet is not water-resistant.
- Do not use the gilet with wet hands and make sure that liquids do not get inside the vest. Disconnect the powerbank if it happens.
- Repairing, such as disassembling and/or reassembling the powerbank is only allowed by qualified professionals
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>