cleverio 51750 CCT WiFi Smart Bulb User Guide

: October 27, 2023
: Cleverio

Table of Contents

cleverio 51750 CCT WiFi Smart Bulb
Use
- Connect to app
Troubleshooting
Safety information
Specifications
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

cleverio 51750 CCT WiFi Smart Bulb

Use

Connect to app

Find and install the app ‘Smart life- Smart living’ on App Store or Google Play.
Register an account in the app or log in to an existing one. Activate Bluetooth and location services on your device.
Make sure the device is connected to your 2.4 GHz wifi.
Insert the bulb in a lamp socket and turn on the light. The bulb flashes.
Open the app. The app searches for devices nearby.
Choose to add the smart bulb when found in the app.
Note! The light bulb stops flashing after 3 minutes and stays lit if no connection has been made to the app. Reset the bulb by following the instructions under “Factory reset”.
If you are using the Smart life-Smart living account for the first time, enter your details for your 2.4 GHz wifi.
The app confirms when the smart plug is added successfully.

Note! The pairing procedure might change due to regular app updates. If the instruction does not correspond with the app interface, please visit
www.kjell.com/51750 -> “Support” for updated instructions.

Connect to voice assistant
Press the “Me” button in the app, navigate to “More services” and choose
to connect the plug to either Amazon Echo, Google Home or other voice assistant serivces

Factory reset
Make sure the light bulb is connected to a socket. Flash the bulb 3 times by turning the power off and on quickly using the light switch.
Note! The light bulb will still be connected to your device and visible in the app. Remove the product connection to your app by selecting it. Edit the device by pressing the pen symbol “ ” in the top right-hand corner of the app. At the bottom of the page press “Remove Device”.

Troubleshooting

The light bulb cannot connect to the app.
Note that the light bulb only uses the 2.4 GHz frequency band. Make sure your smart device is connected to a 2.4 GHz wifi with a stable connection. If you have a dual-band router, your smart device may automatically connect to the 5 GHz wifi instead, which means it cannot communicate with the light bulb. If this happens, temporarily disable the 5 GHz wifi in your router during the installation and try again.
The app needs access to your smart device’s location services. Make sure you have allowed access to location services while using the app.
The connection to the light bulb was lost.
If you recently changed to a new router or renamed your network you need to reinstall the light bulb again. Reset the light bulb by following the instructions in “Factory reset”.
Follow the “Connect to app” instructions to add the light bulb to your home network.

Safety information

Only suitable for working temperature between 0 °C to 35 °C. Not for outdoor use. Only for use in dry areas. Do not open or modify the devices in any way, this should only be carried out by a qualified technician due to the risk of electric shocks or short circuit.

Simplified EU Declaration of Conformity
Kjell & Company hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of the EU declaration of conformity is available at www.kjell.com.