BEGA 22 375 Wall Luminaire Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 22 375 Wall Luminaire
DIMENSION
Instructions for use
Safety
Overvoltage protection
Installation
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 22 375 Wall Luminaire

DIMENSION

Instructions for use

Application

Wall luminaire with directed light.
A luminaire with concentrated light distribution downwards which additionally utilises the reflection properties of the mounting surface.

Product description

Luminaire made of aluminium alloy, aluminium and stainless steel
BEGA Unidure® coating technology
Matt safety glass
Reflector made of pure anodised aluminium Silicone gasket 2 mounting holes ø 4.5 mm
Distance apart 168 mm 2 cable entries for through-wiring of mains supply cable ø 7-10.5 mm
Connection terminal 2.5@
Earth conductor connection
BEGA Ultimate Driver®
LED power supply unit 220-240 V x 0/50-60 Hz
DC 176-264 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Protection class IP 65
Dust-tight and protection against water jets Impact strength IK10
Protection against mechanical impacts < 20 joule
- r – Safety mark
- c – Conformity mark
- Weight: 0.95 kg
This product contains light sources of energy efficiency classes C

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to
the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at: www.bega.com.

Lamp

Module connected wattage 6 W
Luminaire connected wattage 7.2 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 50 °C

22 375 K3

Module designation LED-0518/830
Colour temperature 3000 K
Colour rendering index CRI > 80
Module luminous flux 1045 lm
Luminaire luminous flux 560 lm
Luminaire luminous efficiency 77,8 lm / W

22 375 K4

Module designation LED-0518/840
Colour temperature 4000 K
Colour rendering index CRI > 80
Module luminous flux 1060 lm
Luminaire luminous flux 568 lm
Luminaire luminous efficiency 78,9 lm / W

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
In outdoor areas, the light emission may only be directed downwards.
Undo hexagon socket head screws and lift luminaire top.
Lead the mains supply cable through the cable entry of the luminaire base.
Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
Be sure to use the gasket rings supplied. Make earth conductor connection.
Push silicone sleeves over the lines and make electrical connection.
In order to guarantee the maximum service life of the electrical components, the enclosed desiccant pouch must be placed in the luminaire.
Remove the desiccant pouch from the foil packaging and place it in the position marked by the red information label immediately before finally closing the luminaire.
Make sure that gasket is positioned correctly. Replace the luminaire top and tighten the screws evenly.
Replacing the LED module
The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Close the luminaire.