BOULT X10 True Wireless Earbuds User Manual

BOULT X10 True Wireless Earbuds

Know your X10

What’s in the box ?

• Charging Case
• Earbuds
• Type C Charging Cable
• User Manual
• Extra pair of eartips

Product specification

• Product Name – TWS Bluetooth Headset
• Model – Boult Audio AirBass
• Bluetooth Version V5.3
• Speaker – 10mm
• Bluetooth Range – ~10m/33ft (without any obstacles)
• Neckband Charging Time – 45 mins
• Frequency Range – 20Hz-20KHz
• Technology – HFP/HSP/A2Dp/AVRCP
• Input DC5V = 1A

How to use your X10 ?

• Touch Control
  The Touch Area (MB Touch Panel) is located in the upper part of the earbuds handle.

• Wearing Earbuds
  The earbud marked with L is worn on the left ear and the earbud marked with R is worn on the right ear.

Power On/off

• Power on Auto: Open the charging case and take out the earbuds to power on.
• Manually  Press and hold the MFB for 3s.
• Power off   Auto: Place both earbuds in the charging case, and close the lid.
• Manually: Press and hold the MFB for 5s.
• Play/Pause: Tap the MFB once.
• Next Track: Double tap the right MFB.
• Previous Track: Double tap the left MFB.
• Volume+: Triple tap the right MFB.
• Volume-: Triple tap the left MFB.
• Game Mode: Quadruple tap the MFB.
• Voice Assistant: Long press the MFB for 2s.
• Answer the call: Tap the MB once
• End Call / Reject: Double tap the MFB

Pairing

Open the charging case, and take out the earbuds, earbuds will pair automatically, One of the earbuds flashes blue and red, the other earbud light goes out. Activate bluetooth on the device, turn on Bluetooth, search for pairing name “Boult Audio Airbass” and click on it.

• Single Mode : When on dual mode, put one earbud into the charging case. Only take one earbud out of the charging case and connect it.
• Bluetooth Lost: Turn off the mobile phone’s Bluetooth, earbuds will enter pairing mode and can pair with other devices. If the connection range is exceeded, the earbuds will enter the back connection mode. No connection within 5 minutes, the earbuds will turn off.

Reset
If your earbuds fail to pair, or only one works, reset them.

1. Delete all “Boult Audio Airbass” Bluetooth records on the phone and turn off bluetooth.
2. Put earbuds in the charging case and then take out to pairing modes, tap L& 5 times simultaneously, hear “DU” prompt voice to clear all pairing.
3. Put the earbuds back into the charging case.

Voice Prompt

• You will hear ‘power on’ when the headset powers on.
• You will hear ‘power off’ when the headset powers off.
• You will hear ‘connected’ when the headset is paired.
• You will hear ‘low battery’ when the headset is in low power status
• You will ‘gaming mode’ when the headset is in gaming mode.

Maintenance Instructions

• Warranty is valid/invalid only basis of the below criteria:
• The product should be purchased through legal and formal channels to be applicable for warranty.
• Damaging the product intentionally/ unintentionally, or due to natural disasters, etc. is not covered in the warranty.

FEATURES

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>