Scent A1 Diffuser Instruction Manual
- June 12, 2024
- Scent
Table of Contents
PRODUCT MANUAL
SCENT MARKETING V3.1
Reminding
- Bluetooth indicator:
–Catch the signal – Flash
–Connected – Light on
–Disconnected – Light off
Concentration and Consumption
Grade|
G1
| G2| G3| G4|
G5
---|---|---|---|---|---
Intervals (min)|
15
| 13.5| 12| 10.5|
9
Grade|
G6
| G7| G8| G9|
G10
---|---|---|---|---|---
Intervals (min)|
7.5
| 6| 4.5| 3|
1.5
Notes:
- 100ml oils can diffuse 6300-6700 times under normal circumstances.
- All of the above grade atomization work time is 3 seconds.
- Different grade and oil may with different consumption.
Instructions
Where to get the app:
Please search “scent marketing” in Google play or App store and you will find
it.
Note:
- Please make sure that the Bluetooth function is turned on;
- Please make sure that the location function of the mobile phone is turned on.
- Add device
- Delete working period
- Amend device name
- Remarks: location
- Add working period
- Time switch
- Input password
- (PS:There are 5 working periods available to be set.)
- After adjusting grade, please save it BEFORE going back to the home page.
Amend password
- Slide up and down to adjust
- Select the day
- Select grade
(1-10grade)
If you forget the password, please press the reset button to restore the
factory settings.
The factory settings password is 8888.
Specification
[Product Name] : Aroma diffuser
[ Model ] : A1-V3.1
[ Size ] : 14615658mm
[ Volume ] : 100m1
[ Weight ] : 437g
[ Coverage ] : 30m²/90m²/3100ft³
[ Power ] : Battery (0.9-1.5V) USB 5V
bottle key screws manual
mounting bracket USB cable (purchase on selection) 
- USB port
- Hanging hole
- Fixed buckle
- Key
- Lock parts
- Bluetooth indicator
- Bluetooth indicator
- Level detector reset button
- Reset button
- Battery mode
- Power mode
- Diffuser head
- Bottle
Installation
- Insert the key and the mating pad, twirl to “unlock” and then pull them out. Press the fixed button on the top and push forward.
- Tightly connect the atomizer head and the fragrance bottle, and install them to the machine.
- Choose “Power mode” or “Battery mode”, plug in or insert the battery.(Please wait about 12 minutes to let machine charged on the first time connect with power.)
- Insert the key to the mating parts, then insert them to the keyhole, twirl to “lock” for locking.
3M tape
Warning: Please use 3M tape AND the nails to On the mounting bracket.
Warning
- Please keep the machine vertical. Tilt or lie flatly may cause oil overflow. The machine efficiency may be affected.
- Shall not modify, disassemble or repair the machine. If any failure happens to the machine, please contact our technical personnel.
- Do NOT use quick charger for device.
- When the machine is first used or hasn’t been used for more than 7 days, the controlling board is out of power. Please insert the batteries/plug in and wait for 1-2 minutes, the machine will be back on automatically.
Equipment cleaning
The machine needs to be cleaned when below situations happen:
- You’re about to change to another kind of essential oil.
- The atomization volume becomes weak.
Cleaning steps:
- Pull out the atomized head, loose the bottle.
- Find a larger container and fill the industrial alcohol up, then soak the atomized head and the bottle for 5-10mins.
- Airing the atomized head and the bottle.
Note:
After cleaning the device, turn on the unit, press and hold SET button for 3
seconds to reset remaining oil level.
Troubleshooting
Before asking to have the machine repaired, please try to diagnose the problem first following to bellow instructions.
Breakdown
|
Solution
---|---
Does not diffuse| -Check whether the mode you choose is correct or not.
-Check if the machine is during “Non-Working period”
-Air pump may be damaged, change a new one.
-Check whether the tube is loose or not
Low diffuse| -The atomizing core is blocked, clean by alcohol or change a new
component.
-Check whether the gasket is damage/loose or not.
-Check whether the tube is loose or not
Oil spill| -Check whether the bottle is loose or not
-The gasket in the atomized head is damaged or loose.
Oil sprinkle| -The atomized head is damaged, change a new one
-The machine is tilled or lie down, keep the machine vertical.
Abnormal noise| -The air pump is loose, retighten the pump
-The air pump is damaged, change a new one.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirement.
CE Caution
Use the product in the environment with the temperature between -10°C and 50°C; Otherwise, it may damage your phone. It can be operated under 2000m. For the following equipment:
Product Name: Aroma diffuser
Model: A1
Guangzhou Chiyang Scent Technology Co., LTD. hereby declares that this [ Name: Aroma diffuser, Model: A1] is in compliance with the essential requirements and other relevant provisions of Directive 2014/ 53/ EU.
This product can be used across EU member states.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Do not use other unauthorized chargers power supply for charging.
Do not use the product in environment below -10°C or above 50°C for charging.
Bluetooth
Support Standard:| 802.15.1
Frequency Range:| 2402-2480MHz
Max. RF Output Power:| 3.04dBm (EIRP)
Type of Modulation:| GFSK
Data Rate:| 1Mbps
Quantity of Channels| 40