Guangzhou Chiyang Scent Technology SE8150D Aroma Diffuser Instruction Manual
- June 5, 2024
- Guangzhou Chiyang Scent Technology
Table of Contents
Guangzhou Chiyang Scent Technology SE8150D Aroma Diffuser
Instructions
Where to gal the app;
Please oearch “scant marketing” In Google play or App store and you will find
It.
Note:
- Please make sure thatthe Bluetooth function is turned on;
- Please make sure that the location function of the mobile phone is turned on.
Operations
Power on
Connect with 12V 1Apowersupply, there is a “beep”voice coming out.
Power OFF
Press the icon to turn off the machine
Intensity setting
The machine has 10 intensity levels, press to increase the intensity, press to
decrease
the Intensity.
Power indicator
indicating the direction of the power supply.
Resat Bluetooth App password
press and hold for 3 seconds to reset the password to 8888.
Intensity and oil consumption
SPECIFICATION
- Model: SE8150D- V2.0
- Dimension: 112112293mm
- Bottle capacity: 120ml
- Weight: 1.2KG
- Coverage: 200m’
- Power: 4.5W
- Voltage: DC12V
Check and make sure the packaging is complete when you first open it, if any problem please contact us soon.
Installation
- Press on the top cover to open the machine.
- Take out the top cover with diffusion head and bottle.
- Unscrew the bottle.
- Fill the bottle with fragrance.
Warning
After installation, please
keep the machine vertical. Tilted or angled may cause oil overflow, which will
contaminate equipment circuit, affecting the normal use and unnecessary waste
if you are not a technician, you must not modify, disassemble or repair the machine. If the machine malfunctions, please contact our technical personnel.
EQUIPMENT CLEANING
The machine needs to be cleaned when the below situations happen:
- You’re about to change to another essential oil;
- The atomization volume becomes weak.
Cleaning steps:
- Find a clean bottle and fill it with industrial alcohol.
- Install this bottle to the machine and turn the machine on. Let it work for 5-1 O minutes.
- Turn off the electricity, and finish the cleaning.
TROUBLESHOOTING
Before asking to have the machine repaired please try to diagnose the problem first follow to below instructions
| Problem | Solution |
|---|
No diffusion
| – Check if the power is ON or OFF.
– The pump is damaged and needs replacing.
– If there is no diffusion or ii is weak, replace the oil with rubbing alcohol and run ii through the machine for 5 minutes.
Little or no spray coming out
| -The atomization head is blocked. Clean diffuser by running rubbing alcohol through it. Or replace the diffuser core.
• Diffuser core with straw is missing or damaged. Replace it with a new one.
– Pump is damaged and may need replacing.
Diffuser spraying liquid| – The diffuser core is damaged. Replace diffuser core.
– Machine is tilted or angled. Make sure it’s upright at all times.
Oil leaking
| – Bottle is loose. Screw it in properly and straight.
– Seal is broken or missing. Replace the supplied seal that came with the machine.
Abnormal sound| – Pump is loose or damaged. Tighten the pump or replace it.
No display on the screen
| – Make sure the power is ON.
– Check the plug for damage. Try another outlet. If the plug is damaged replace it.
– Display screen is damaged. Replace.
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment. This
equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following
two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF exposure guidelines, This equipment
should be
installed and operated with a minimum distance of 20cm from the radiator of
your body. This device
and its antenna(s) must not be co-located or operated in conjunction with any
other
antenna or transmitter
Caution:
- This product can be used in EU member states. This device can be used in European Union.
- Products can be sold in all EU countries Declaration of conformity Trimble Transportation declares that Microsystem with Aroma diffuser is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.
- This equipment should be installed and operated with a minimum distance of 20cm from the radiator your body
Applicant: Guangzhou Chiyang Scent Technology Co., LTD.
Address: 4F, Building C5, Gaosha Industrial Estate, Zhongyi Village, Zhongcun
Town, Panyu Guangzhou, Guangdong, 511495 China
Manufacturer: Guangzhou Chiyang Scent Technology Co., LTD.
Address: 4F, Building C5, Gaosha Industrial Estate, Zhongyi Village, Zhongcun
Town, Panyu Guangzhou, Guangdong, 511495 China
Frequency:2402-2480MHz
Max power:-6.45dBm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>