LINGDU LS05D 210922 3.18 Inch Car DVR User Manual

LINGDU LS05D 210922 3.18 Inch Car DVR User Manual

SPECIFICATION

Pyccum.etc
Photo Resolution| 2M/5M/8M/12M
Photo Format| JPG
Video Code| H.264, M P4
Video Resolution| UHD=3840×2160 QHD=2K=2560×1440

FHD=1920×1080

ONLY Front Camera: UHD P30; QHD P30; FHD P30

Front & Rear Camera:UHD P30+FHD P30; QHD P30+FHD P30; FHD P30+FHD P30

Front & Cabin Camera:QHD P30+FHD P30; FHD P30+FHD P30

Front & Cabin & Rear Camera: 2K P30+FHD

P30+FHD P30; FHD P30+FHD P30+FHD P30

GPS Track| Support
G-sensor| Built-in
---|---
Loop Recording| Support
Motion Detection| Support
WiFi| Support
Parking Mode| Support (ONLY work when connected hard-wire kit)
Micro SD Card| Max support 512GB (Class10 or above, High-speed)
Mic| Support
Speaker| Support
Battery| Built in Super Capacitor (Only has 1 mAh Lithium Metal Battery used to memory time)
Power Interface| 5V/2.5A
Working Temperature| -20°C to 70°C

PRODUCT DIAGRAM

1. Screen
2. Cabin Camera
3. Power
4. UP
5. OK
6. Down
7. Mode
8. Mic
9. Reset
10. Speaker
11. USB Charging Port
12. Rear Camera Port
13. Micro SDCard Slot
14. Rear Camera

1. Micro SD Card Indicator
2. Parking Monitor
3. Date/Time
4. Recording Indicator
5. Exposure
6. Motion Detection
7. GPS Indicator
8. WDR
9. Mic
10. WiFi Indicator
11. Battery Indicator
12. Loop Recording Timer
13. Video Resolution
14. Live Speed

KEYS AND FUNCTIONS

Long press power button for 2-seconds.

Press Once – to Turn OFF/ON LCD (It is still working)

| 1.Press Once – to Start/Stop Video Recording

2.Press Once – to Take Snap-Shot while in Photo Mode 3.Press Once – to Play/Pause Current Video while in Play Mode

4.Press Once – to Enter / Confirm Specific Settngs while in Menu Settngs

| 1.Press Once – to enter/exit menu settngs

2.LONG PRESS for 2-Seconds – to Switch Modes from [Recording Mode ] [Photo Mode] [Playback Mode]

| 1.Press Once – to Turn OFF/ON audio recording

2.LONG PRESS for 2-Seconds – to Lock the Current Loop Cycle Video File while Video is being recorded

| 1.Press Once – to shift camera display mode

2.LONG PRESS for 2-Seconds – to Turn ON WiFi, this will turn ON wifi signals from the dash cam.

FUNCTION

Video Settings Resolution

Allow to choose the desired video resolution and fps(frames per second). Higher resolution and FPS videos result in smoother videos, but also take more storage space. The video resolution is ONLY for FRONT camera recording.

Loop Recording — Off/lmin/ 3mins(Default)/ 5mins
On: Here select the length(1/3/5 min) of each video clip for the loop recording. This function allows the Dash-cam to continuously record. Please notice: the Dash-cam will keep deleting the oldest files automatically when memory card gets full so that it can keep recording over and over.

Rear-cam Mirror — On(Default)/Off
On: Dash cam screen will display the mirror image and should match your rear-view mirror.

Time Lapse — Off(Default)/On
On: The Dash-cam can sustain longer operational period while reducing video file size.
Video files will be played at high-speed when playback.

Record Audio — On(Default)/Off
On: The video has sounds. Off: The video is silent.

WDR — On/Off(Default)
Wide Dynamic Range (WDR) processes images to ensure clear recordings in bright and dark light. This allows the Dash Cam to combine multiple images at different levels of brightness to create one superior image.

Frequency — 50HZ/ 60HZ(Default)
According to the power supply specification used in your country. 60HZ-Used in USA, North America
50HZ-Used in Europe, most Asian Countries.

G-Sensor — Off/ High/ Middle(Default)/ Low
G-sensor is a 3-axis impact gravitational accelerometer, designed to detect physical and gravitational forces on the Dash-cam. Once G-sensor has triggered due to physical or gravitational impact force on the camera, the current video file will be locked as an emergency file so it won’t be deleted by loop cycle function.

Exposure —+2.0,+5/3,+4/3,+1.0,+2/3,+1/3,+0.0(Default)/-1/3, -2/3,-1.0,-4/3,-5/3,-2.0
To adjust video exposure setting for either brighter or darker video according to your preference.

Playback Mode
Normal Video: Its the video files That video file saved when in loop recording mode.
Locked Video: Its the video files that Dash-cam lock the current files after the car’s shocked.
Picture: Photos that taken when photo mode.

Park Monitor
This function will ONLY work when AZDOME’ s 3-Lead Hardwire Kit is nstalled properly, the output current of Hardwire Kit needs to reach 2.5A. Then Select [Connected] and select parking mode. This parking mode has three options to choose from.

*Time-Lapse Parking Mode:

1. When you turn OFF the car’ s engine and turn the key to the lock Then the camera will STOP the continuous video recording and it will go into the timelapse lfps recording mode automatically.
2. Now while this timelapse is being recorded, If someone hits your car and if the impact reaches the set G-Sensor level, then the camera will stop the timelapse video > then it will start to record 1-min continuous video, save & lock that video in EMR folder> then return to recording the timelapse lfps.
3. Now when you start your car for the next time, the camera will automatically STOP the timelapse parking mode. Then it will go into normal video mode automatically to start the continuous video recording.

*Motion Detection Parking Mode:

1. When you turn OFF the car’ s engine and turn the key to the lock Then the camera will STOP the continuous video recording and it will go into the motion detection mode and the camera will stay ON and idle, but LCD will be off after 1-min.
2. Now the camera will only record 30 seconds video when it detects motion in front and cabin lens of the camera and then it will record until there is no more motion is detected.
3. Now while the camera stays in Motion Detection mode, If someone hits your car and if the impact reaches the set G-Sensor level, then the camera will stop the motion detection mode > then it will start to record 1-min continuous video, save & lock that video in EMR folder> then return back to the motion detection mode.
4. Now when you start your car for the next time, the camera will automatically STOP the motion detection parking mode, and it will go back into normal video mode automatically to start the continuous video recording.

*Collision Detection Parking Mode:

1. When you turn OFF the car’ s engine and turn the key to the lock Then the camera will STOP the continuous video recording and it will go into the collision detection mode and the camera will turn OFF.
2. Now while the camera stays in collision detection mode, If someone hits your car and if the impact reaches the set G-Sensor level, then the camera will turne ON > then it will start to record 1-min continuous video, save & lock that video in EMR folder> then the camera will turn OFF.
3. Now when you start your car for the next time, the camera will automatically go back into normal video mode automatically to start the continuous video recording.

Date/Time Settings
Must set the Timezone first, setting path: [System Settings]-[Timezone]. Then set your local date and time.

Stamp — Off/On(Default)
Time Stamp / GPS Stamp / Speed Stamp , when on the stamp information will be shown on the video or photo.

**Storage

**

Storage Format Remind:Once chose a time duration and turned on this function, the dash cam will pop up “Please format SD card” to avoid too much locked files to use loop recording.SD Card Format: The Micro SD card must be formatted when inserted first time in the Dash-cam. The formatting process will make sure that the card’s file system format is optimized for the camera.

Storage Info: To check the usage of memory card, please format the memory card regularly to ensure that there is enough available space inside.

Language — Multilingual, default English.
Allow to choose your desired language for dash-cam system.

**System Settings

**

Fatigue Driving Reminder — Off(default )/lhour/2hours/4hours Once chose a time duration and turned on this function, the dash cam will make sounds to alert.

Speed Unit — KM/H(default)/MPH Beep Sound — On(default )/Off
To switch on/ off or adjust the key tone. Screen Saver — Off/1 min(Default)/3 mins/5 mins
On: The screen will go black after 1/ 3/5 minutes no-operation while the Dash-cam is still on/ recording.

IR LED —Auto(Default)/Night Mode/Day Mode
The function works on the cabin camera.

Timezone Setting — UTC/GMT+12 to UTC/GMT-12, Default GMT +8
Before setting Date/Time, please set your local Timezone first according to your location, then press”OK” to confirm. The timezone won’t change automatically when it starts/ ends daylight saving time, please adjust it manually at that time.

Default Setting
Allow to restore all settings to factory default settings. GPS Info
Check the satellite number / Longitude / Latitude / Speed.

Information
To check the current firmware in the Dash-cam. You’ll need this necessary information to check if newer version firmware is available to update. Please visit help@azdome.hk for the latest firmware.

DISCLAIMER

The videos/pictures taken by Car dash cam is only for a reference, we don’ t take any responsibility due to data-loss in the abnormal circumstances. Special version: The device will records files in normal recording status. But in the following situation, it will lead to files to be damaged or lost;

1. If pulling out the TF card in the recording status, final video files will be damaged or lost.
2. If there is illegal blackout in the recording status, final video files will be damaged or lost.
3. If there is a destructive collision in the recording status, video and audio files will be damaged or lost.
4. If there is a destructive collision in the recording status leading to Memory card loose, video and audio files will be damaged or lost.

NOTICE

CE This product complies with the radio interface requirements of the European Community. This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate and recycling helps protect natural resources, human health and the environment. For more information on disposal and recycling of this product, contactyour local municipality, disposal service, or the shop where you bought this product.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>