shokz AW0879 Adaptor Wireless Headset User Manual
- June 5, 2024
- SHOKZ
Table of Contents
ONE-PIECE ADAPTOR
About
Radio voice Bluetooth® module is based on Bluetooth®, radio and digital audio processing technology to meet the wireless communication demand of professional use two-way radios.
Easy and Simple Operation
Device features One-Touch pairing (NFC), a short pairing time, and similar
operating method to most Bluetooth® headsets in the market.
Appearance
Elegantly designed and built for the communication professionals.
Great Quality
Made with comfortable polyurethane Kevlar reinforced cable, all products were
design under a stringent quality audit and strict reliability test.
Instruction
Ensure that the distance between the wireless headset and the radio is within
10 meters while in use.
Only use the wireless headset while driving if traffic conditions permit safe
use.
Comply with local laws and regulations on the use of wireless headsets while
driving. Do not use the adaptor in a thunderstorm.
Avoid using the headsets at high volume for too long.Images included in this
manual are for reference only.
Wireless Adaptor LED Indicator
| LED indicator | Wireless adaptor status |
|---|---|
| Solid blue for 1 seconds | Power on |
| Flashes red | Powered ON but not connected with wireless headset |
| Twin flahsing blue | Connected with wireless headset and headset was not |
worn.
Flashes blue| Connected with wireless headsets and the headsets were
worn
Product Introduction
• Wireless headsets
AW0879 Adaptor
Wireless Adaptor Specifications
| Dimensions | 81 x 11 x 58mm |
|---|---|
| Ingress Protection | IP55 |
| Maximum RF output power | 3.724 mW |
| Working temperature | 0℃~ +45℃ |
Before Use
Installing the Wireless Adaptor
- Open the accessory connector cover of the radio.
- Align the adaptor plug with the accessory connector.
- Rotate the screw on the adaptor clockwise to securely fasten the adaptor.
Operation Instructions
Power on
| Product name | Operations |
|---|---|
| AW0879 Adaptor | The dongle powers on when communication terminal powers |
on
Wireless headset| Press power button and hold for 3 seconds, Solid red
for 1 second
When product powers on , LED indicator light flashes between red and blue, You can know the working state of the product by the LED indicator light, Please refer to “LED indicator light” for details.
Power off
| Product name | Operations |
|---|---|
| Dongle | The dongle powers off when communication terminal powers off |
| Wireless headset | Press power button and hold for 3 seconds, Solid red |
for 1 second
Pairing and connection
- Wireless headset and dongle should be paired before use. This product supports NFC pairing.
- Make sure the dongle is powered on.
- Ensure the wireless headset is ON or in pairing mode.
- Place the NFC identification area of the wireless headset near the NFC detection area of the wireless adapter.
Wearing
- When wireless headsets is in wearing state, voice interaction goes with the headsets
- When wireless headsets is out of wearing state, voice interaction goes with the communication terminal.
Emission
After wearing the headset, push the “ PTT/multifunction button ” to switch the communication device into Emission mode.
Services
Our company promises that in normal use, operation and maintenance conditions, we will give two years of warranty for free. Please contact the local dealer for more help.
Product scrap treatment
Please do not discard the electronic headset parts in the same receptacle as your daily garbage. Reference your country or region’s guidelines on appropriate measures for collecting discarded electronic products. Please consult local authorities for more details.
Contact us
3200 Gracie Kiltz Lane，4th floor，Austin, TX 78758
www.aftershokz-communications.com
Factory：Shenzhen Voxtech Co.,Ltd.
Address：4/F East, Building 4,Minqi Technology Park, Pingshan, Xili,
Nanshan District, Shenzhen, Guangdong,China
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device. pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation If this equipment does cause harmful interference to radio or
television reception. which can be determined by turning the equipment off and
on. the user is encouraged to try to correct the interference by one or more
of the following measures:
—Reorient or relocate the receiving antenna_
— Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.’
This equipment complies with FCC/IC
radiation exposure limits set forth for an uncontrolled environment and meets
the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the IC radio
frequency (RF) Exposure rules. This equipment has very low levels of RF energy
that is deemed to comply without testing of specific absorption rate (SAR).
This device complies with Part 15 of the FCC rules.Operation is Subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
Changes or modifications not expressly approved by the part responsible for the compliance could void the user’s authority to operate the equipment.