Scent 503010776-A316 Aroma Diffuser Instruction Manual

Scent 503010776-A316 Aroma Diffuser

Product Information

Specifications:

• Product Name: Base Wallbracket
• Bluetooth Version: AE103_7856
• WIFI Version: A1_AFFBA350
• Device Model: A31A5-ABA9B5B
• Password: Factory default password is 8888
• Label: SA100-V6.0_B9B5B
• Aroma oils consumption: 1.58 ml per hour of continuous machine work with 13 mPa.s aroma oil
• Aroma oils capacity: 150 ml
• Remaining Aroma oils: 166 days based on consumption, aroma oil grade, and working periods
• RF Exposure Information: Minimum distance of 20cm between the radiator and the body

Product Usage Instructions

Where to get the app:

Please search for “Ecoappls” in Google Play or App Store to download the app.

Note:

1. Please make sure that the Bluetooth function is turned on.
2. Please make sure that the location function of the mobile phone is turned on.

Device Control:

You can control the device using the app. Login with your password and control the following settings:

• Turn ON/OFF the device
• Turn ON/OFF the fan
• Set working period
• Calibrate consumption
• Change concentration grade
• Amend password

Calibration:

To calibrate the consumption, follow these steps:

1. Measure the remaining oil of the bottle.
2. In the app, tap on “Calibrate” and input the amount of remaining oil.
3. Confirm the calibration.

Working Period Setting:

You can set the start and stop working time for each day of the week. Follow these steps:

1. Select the desired day.
2. Select the start and stop working time.
3. Repeat for other days if needed.
4. Save the settings.

Changing Concentration Grade:

You can change the concentration grade of the aroma oil. Follow these steps:

1. Select the desired grade.
2. Save the settings.

Amend Password:

If you forget the password, press and hold the ON/OFF button for 3 seconds to restore factory settings. The factory setting password is 8888.

Installation:

To install the device, follow these steps:

1. Make sure the base is aligned with the 4 holes at the bottom of the machine, then fix the screws.
2. Align the base with the holes on the bottle of the machine and secure it with screws.

Specification

• Model:  A316
• Size:  195150585mm
• Bottle: 1000ml
• Input:  DC12V — 2A MAX
• Power: 12W
• Coverage:  900m/2700m%/6350ft3
• N.W: 3.6kg
• Material:  Plastic, metal

Bluetooth instruction

Where to get the app:

Please search for “Ecoappls” in Google play or App store.

Note:

1. Please make sure that the Bluetooth function is turned on;
2. Please make sure that the location function of the mobile phone is turned on.

Amend password

If you forget the password, please press the long press the ON/OFF button for3s to restore factory setting. The factory settings password is 8888.

Installation step

1. Open the back cover with key:
2. Remove the back cover:
3. Twist off the bottle cap;
4. Add fragrance oil into the bottle;
5. Tighten the bottle cap, place the bottle back in the machine, and lock the back cover with a key.

Installation mode:

Floor standing:

1. Make sure the base is aligned with the 4 holes at the bottom of the machine, then fix the screws;
2. Align the base with the holes on the bottle of the machine, and secure it with screws.

Wall mount:

1. Drill the 4 screws into wall;
2. Hang the machine to the screws.

Concentration and Consumption

1. The data shown above was obtained based on our testing essential oil.
2. The consumption rate of different essential oils varies, the above data is only for reference, the actual data may prevail.

Warning

1. Please keep the machine vertical after installation.Tilting or lying flat can cause oil to overflow, and the circuit board may be contaminated, which could affect its efficiency.
2. Should not modify, dismantle or repair the machine arbitrarily. Any malfunction occurs, please contact the relevant technician immediately.
3. The machine does not work when it is not in the programmed working period, even the atomization icon is displayed on the screen;
4. When the machine is in lock status, the button can not be operated and there is noany display on screen.

Troubleshooting

Before asking to have the machine repaired, please try to diagnose the problems first based on the following instructions.

Equipment cleaning

1. cleania clean bottle and fil it with industrial alcohol.
2. Add industrial alcohol into bottle about 15%, and make it diffuse 5 minutes.
3. Air the atomized head and the bottle.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

RP Exposure Information

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>