Guangzhou Chiyang Scent Technology A804-BT Scent Marketing Instruction Manual
- June 5, 2024
- Guangzhou Chiyang Scent Technology
Table of Contents
Guangzhou Chiyang Scent Technology A804-BT Scent Marketing
USE WARNING
-
When inserting the oils bottle, please keep the machine vertical. Tilt or lie flatly may cause oil overflow and then destroy the machine.
-
This product is only suitable for supporting essential oils. Once run out of the oils, kindly contact your supplier for another bottle of oils.
-
Shall not modify, disassemble or repair the machine.
-
Do not use this product under high humidity and high-pressure conditions.
-
It is better to screw the machine on the wall than just stick it via tape; otherwise, the machine will be easy to fall down.
PRODUCT PARAMETERS
- Product: A804-BT
- Dimension: 206 68*68mm
- Materials: PP
- Input voltage: 3.0V
- Bottle capacity: 150ml
- Accessories: diffuser, bottle, screws, double-sided tape
- Coverage. 50-80m2
OPERATION STEPS
-
Install AA (Alkaline) batteries and insert the oils bottle.
-
Remove cover of the tape and stick machine on wall,elevator, etc. (Better to screw the machine on the wall to avoid falling down.)
-
Open the APP to operate the machine.The light will be blue while you connect it with the APP and will be off after you log out the APP.
WORKING PARAMETERS
TROUBLESHOOTING
Before having the machine repaired,please try to diagnose the problem first with the bellow instructions
APP OPERATION INSTRUCTIONS
-
Please search “scent marketing” in Google play or App store for the APP(application).
-
Turn on the Bluetooth as well as the APP,and then click the name of device (White Mini) to process the connection.
-
Input the password “8888” to login
-
After entering into the main interface you can amend device’s name, mark the location, ect.and then click “save” to save the modification.
-
Working period setting:
-
Choose the starting time and stopping time of the period as well as the repeated day.
-
Then, choose factory preset intensities (G1-G3) or have customized setting on working time and interval time.
-
Click “save” to get it done. Ps: There are 5 working periods available to be set.
-
Change password:
-
Click “about” and then “Change password” to customized the new password.
Ps: If you forget the new password, press the reset button to restore the factory one “8888”
FCC Warning Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
RF Exposure Statement
To maintain compliance with FCC’s RF Exposure guidelines, This equipment
should be installed and operated with minimum distance of 20 cm the radiator
your body. This device and its antenna(s) must not be co-located or operation
in conjunction with any other antenna or transmitter.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>