Chiyang Scent CA500S Aroma Diffuser User Manual

Product Manual
Aroma diffuser
CA-500S-V2.0

CA500S Aroma Diffuser

SCAN THE GR CODE TO DOWNLOAD THE APP

|
---|---
https://apps.apple.com/us/app/cubearoma/id6450209094| https://play.google.com/store/apps/details?id=com.cube.aroma &pli=1

www.cubearoma.com

Concentration & Consumption

Note :

1.The above data are tested based on the test oil;
2.The above data is for reference only,and the amount of atomization produced by different essential oils may be different.

Specification

Panel Description

LCD+Btuetooth version;
See panel operation for details

Installation Steps

1. Open the door with key,

2. Twist off the bottle;

3. Add fragrance into bottle;

4. Screw the bottle back to the machine head, then lock the door with key.

5. Mark the bracket holes,drill holes at the marks,install the wall anchors;

6. Screw the bracket to the wall, then hang on the machine

Cleaning diffuser

Diffuser should be cleaned regularly, tiring recommendations below

1. Refitting/changing fragrance in reservoir
2. Scenting strength becomes weal

• Tur off Scenting Diffuser before cleaning
• lace clean bottle with small quantity of Methylated Spirits” /industrial alcohol
• Turn on Machine and let diffuse tor S minutes
• Turnoff power and unscrew cleaning fluid bottle
• Replace with fresh fragrance. machine is now ready for diffusing

APP instruction

Where to get the app?
Please search for “Cube Aroma “in Google play or App store.
Note:

1. Please make sure that the Bluetooth function is turned on;
2. Please make sure that the location function of the mobile phone isturned on.

Amend password

If you forget the password, please press the reset button to restore the factory setting.The factory settings password is 8888.

Troubleshooting

Before asking to naihie the machine repaired, please try to diagnose the problem first following to bellow instruction

-If the machine is in “not working period”, it stops diffuse;
-The pump is damaged, change a new one.
Spry liquid| -Atomized nozzle may be blocked. diffuse with alcohol to do cleaning ;
-Pump is aging, change a new ono.
Spray liquid| -Atomized nozzle is damaged, change a new one;
-Machine is filled or leer flat, please make it stand orient.
oil spill| -Bottle is loose, screw it c) the right place.
Abnormal sound| -Hint) is loose, install Incorrectly.
No display on screen| The power is off;
-Plugs is damaged, change a new plug -,
-Display screen is damaged, change a new one_

Touch Screen Setting

Turn on the power
Connect the power and turn on the switch with a sound Beep “coming out then the screen shows the initial time and the current grade.
Turn off the power
The screen will be off when turn off the switch and disconnect the power
Local time setting
Tap SET button and hold for seconds until you hear a sound beep then the date value start flashing tap or to adjust the date,then confirm and adjust time value by taping ENT button. Tap or to adjust the time.Tap SET button to save the setting.(Shown as picture I)

Concentration grade setting
There are 20 grades to choose Tap button, the grade wil increase. Tap the grade will decrease.(Shown as picture 2)

Working periods setting

There are total 5 working periods(shown as picture 3).lap SET to get the first working periods(ONI&OFF1).
Tap or to set the start time, tap ENT to confirm and then set the stop time.
After setting the first working periods(ON1&OFF1),we can set the working date.
Tap ENT to turn to MON and tap date enter the working time period for MON, (ON 1 is displayed on the screen,shown as picture ,tap to confirm and exit the current setting.OFF1 is displayed on the screen,shown as picture 5).
After finish setting the Nol working period, tap SET to confirm and exit.
ap ENT to turn to next day’ 5 setting. The setting step for NO2,NO3,NO4,No5 is same as No1 After setting all working time periods, tap SET to confirm and exit the setting.
‘Grade display with”-CU-“is for customized grade, only can be operated by APP.(picture 6) Machine doesn’ t work when the start time is same as stop time.

Date| 00:00
00:00| 00:00
00:00| 00:00
00:00| 00:00
00:00| 00:00
00:00
---|---|---|---|---|---
Mon| ON/OFF| ON/OFF| ON/OFF| ON/OFF| ON/OFF
Thues| ON/OFF| ON/OFF| ON/OFF| ON/OFF| ON/OFF
Wed| ON/OFF| ON/OFF| ON/OFF| ON/OFF| ON/OFF
Thur| ON/OFF| ON/OFF| ON/OFF| ON/OFF| ON/OFF
Fri| ON/OFF| ON/OFF| ON/OFF| ON/OFF| ON/OFF
Sat| ON/OFF| ON/OFF| ON TOFF| ON/OFF| ON/OFF
Sun| ON/OFF| ON/OFF| ON/OFF| ON/OFF| ON/OFF

PS.The first working period is default from 00.00–23.59 everyday.)

Wifi instruction

Calibrate: It is used for calibrating consumption.
It is advised to calibrate after working for at least 10 days. Please measure the remaining oil of bottle first, then tap calibrater in the APP, input the amount of remaining oil, and confirm. So the consumption, remaining day, and percentage will be updated.

How to connect with HVAC

Installation step

warning

FCC Warning

This device complies with Part I5 of the FCC Rules. Operation is subject to the following two conditions:
(I) This device may not cause harmful interference, and (2) this device must acceptancy interference received,including interference that may cause undesired operation.
NOTE L This equipment has been tested and found to comply with the limits for acylases B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and,if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off Andon, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet ona circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

NOTE2: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
The device has been evaluated to meet general RF exposure requirement.

warning

Shall not modify, disassemble or repair the machine arbitrarily. Any failure happens, please contact relevant technician In time.
Shall not damage the power cord, force to bend, yank, heavy load, clip or reprocess.
— Shall not use the AC plug when itis damaged or un-matched with the socket;
— Shall not wet the machine or the AC plug;
— Shall not use overloaded power socket, wire or broken plug.
Shall not touch the wire or product shell when thundering or/and lightening.
Shall not disassemble the machine when it is under operating.

Application

Application places: Hotel, Meeting Room,Mall,Exhibition Hall, Brand retail store,Bar,SPA,Business Place or anywhere you want to enjoy aroma experience.

Caution

• Atomization icon display on screen but the machine would not diffuse when it stays on pause time.
• Touch! Tap icons will not operate when Diffuser is in lock status.
• Display scream not functioning normally, displays unclear or program crash. Reset Diffuser; touch “ENT” (5 seconds} until “beep”
• Diffuser must be vertical at all times when fragrance is in bottle. When lying flat, tilted or horizontal the fragrance could overflow. This may effect Diffuser efficiency if circuit board or pump is contaminated.
• Afler installation, please keep the machine vertical. Tilting or placing flat may cause an olloverflow. The machine efficiency may be affected if the circuit board is contaminated.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>