AMERICAN EXPRESS MU3004 Wall Mount Instruction Manual
- June 12, 2024
- American Express
Table of Contents
- Safety Caution
- Before Starting Assembly
- Hardware Included
- Step 1A Clamp Installation
- Step 1B Grommet Base Installation
- Step 2 Attach the VESA plates to the monitors
- Step 3 Attach the monitors to the stand
- Step 4 Tilting Adjustment
- Step 5 Switch screen horizontally and vertically
- Manage tools and cables
- Set the desired angle of the monitors
- Product dimensions
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
AMERICAN EXPRESS MU3004 Wall Mount Instruction Manual
|
---|---
Each Monitor| 75x75mm
100x100mm
If you have any questions, please feel free to contact Customer Service via Amazon before returning.
Safety Caution
Please read this instruction carefully before installation.
If you do not understand these instructions or have doubts about the safety of
the installation, assembly or use of this product, please contact us.
WARNING: This product contains small items that could be a choking hazard
if swallowed.
KEEP AWAY FROM CHILDREN UNDER 3 YEARS OLD. ADULT SUPERVISION IS REQUIRED.
Before Starting Assembly
When attaching brackets to the flat screen, be careful not to over tighten screws and be sure that screws do not bottom out in the mounting holes.
Before starting assembly, verify all parts are included and undamaged. For
parts shortage or damage, please contact us.
Do not tighten the screws excessively or your monitor might be damaged.
Hardware Included
-
Clamp Bracket
-
L Plate
-
Round Plate
-
Upper Pole
-
Head
-
VESA Plate
-
2mm Allen key
-
3mm Allen key
-
5mm Allen key
-
Screw M8*10mm
-
Cable Clip
All are included in 01A
-
a Clip Plate
-
b Knob Bolt
-
c Bracket
-
d Bolt
-
e Washer
-
f Washer
Monitor Kit
-
Philips Screws
-
Philips Screws
-
Safety Screw
-
Spacers
Step 1A Clamp Installation
Assemble the upper pole 02A
and the lower pole **02B**
together
Secure the pole assembly with the preassembled screw
Secure the L plate **01B**
to the lower pole **02B**
with the preassembled
screws.
Secure the clamp bracket to the L plate with the screws **06**
Step 1B Grommet Base Installation
Assemble the upper pole 02A
and the lower pole **02B**
together.
Dis-assemble the clamp bracket. the marked parts a
and **b**
will be used
in next step.
Secure the pole assembly with the preassembled screws
Assemble the round plate **01C**
to the lower pole **o2B**
with the
preassembled screws.
Position pole assembly on the desk then secure it by tightening the knob bolt
after making knob bolt **b**
through the Long plate **a**
, desk hole, and
the bottom of pole assembly sequentially.
Step 2 Attach the VESA plates to the monitors
(a) For Flat Back
(b) For Recessed / Curved Back
Note: use 1 piece or 2 pieces of spacers **M-D**
Step 3 Attach the monitors to the stand
Assemble the monitor heads**03**
and the pole toghther.
Slide the monitor head **03**
down
Slide the monitor heads **03**
down to desired height and secure them via
tightning the bolts
Hang the first monitor onto the arm then using the safety screw **M-D**
to
secure the monitor and attach the cable clips **07**
.
Repeat the previous step to secure another monitor, then attach the cable
clips **07**
to the poles.
Step 4 Tilting Adjustment
Loosen tilting bolts, pull monitor to your desired angle, then fasten tilting
bolts with the 5mm Allen key **05C**
.
Step 5 Switch screen horizontally and vertically
360° Rotation
This function works better for monitors with the center of gravity.
Note: To ensure stability, the tightness of the rotation axis is preset,
so it need take some effort to rotate the VESA Plate.
Suggestion: Please attach the monitor first, then hold the two sides of
it with both hands, and rotate vigorously. If that doesn’t work out, please do
not hesitate to ask for our help via Amazon.
Manage tools and cables
Set the desired angle of the monitors
Product dimensions
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>