DIGITUS DN-7042-1 Rev.3 Wireless 150N USB 2.0 Adapter Installation Guide

June 7, 2024
DIGITUS

Company Logo WIRELESS 150N
USB 2.0 ADAPTER

DIGITUS DN-7042-1 Rev.3 Wireless 150N USB 2.0 Adapter Quick Installation Guide
DN-7042-1 Rev.3

Driver Installation

Please follow the following instructions to install your new wireless USB Adapter:

  1. Insert the USB wireless network card into an empty USB 2.0 port of your computer, when the computer is switched on. Never use force to insert the card, if you feel it’s stuck, flip the card over and try again.

  2. The following message will appear on your computer, click ` Cancel / Close ‘.
    Windows 7/8/10
    DIGITUS DN-7042-1 Rev.3 Wireless 150N USB 2.0 Adapter -
Windows

  3. Insert the driver CD into your CD-ROM. You can see the auto-run screen below. If not, you can double click [ **autorun.exe**](http://autorun.exe)‘ on CD. ![DIGITUS DN-7042-1 Rev.3 Wireless 150N USB 2.0 Adapter - Insert the driver](https://manuals.plus/wp-content/uploads/2021/09/DIGITUS- DN-7042-1-Rev.3-Wireless-150N-USB-2.0-Adapter-Insert-the-driver.png)Click Install Driver ‘ to start the installation procedure

  4. Installation descriptions showed. Click ` Next ‘ to continue
    DIGITUS DN-7042-1 Rev.3 Wireless 150N USB 2.0 Adapter -
Installation

  5. Once the installation is finished the computer will be asked to reboot. You can click ` Finish ‘ and reboot the computer to finish the installation of driver filesDIGITUS DN-7042-1 Rev.3 Wireless 150N USB 2.0 Adapter - Once

  6. Insert the USB wireless network card into a USB 2.0 port of your computer, the system will find the new hardware and will install the drivers automatically.
    DIGITUS DN-7042-1 Rev.3 Wireless 150N USB 2.0 Adapter -
USB

  7. After finishing driver installation, click adapter utility from your taskbar or programs folder. Click “ available networks “, select the wireless access point you would like to connect and press the “ Add to Profile ” button.
    DIGITUS DN-7042-1 Rev.3 Wireless 150N USB 2.0 Adapter -
finishing

  8. Fill in the security information if any requirement, and then click “ OK ” to connect the wireless network.
    DIGITUS DN-7042-1 Rev.3 Wireless 150N USB 2.0 Adapter -
security

  9. Connected successfully. It will show the status screen.
    DIGITUS DN-7042-1 Rev.3 Wireless 150N USB 2.0 Adapter -
Connected

DN-7042-1
Technical Description Frequency

Frequency Range:| 2412MHz-2472MHz for 802.11b, g, n/HT20
2422MHz-2462MHz for 802.11n/HT40
---|---
Transmit Power:| < 20 dBm EIRP
Hardware Version:| V 1.0
Software Version:| 1030.38

The manual content may be changed. Please also refer to the latest version on the webshop.
Hereby Assmann Electronic GmbH declares that the Declaration of Conformity is part of the shipping content. If the Declaration of Conformity is missing, you can request it by post under the below-mentioned manufacturer address.
www.assmann.com
Assmann Electronic GmbH
Auf dem Schüffel 3
58513 Lüdenscheid
Germany

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals