Aranet-PRO Base Station 12 User Guide
- June 6, 2024
- Aranet
Table of Contents
Aranet-PRO Base Station 12 User Guide
1. CHECK THE CONTENTS OF THE BOX
2. ATTACH THE DEVICE TO THE MOUNT
3. CONNECT POWER TO THE DEVICE
4. TURN THE DEVICE ON
5. CONNECT TO THE DEVICE
6. CONFIGURE THE DEVICE
ADDITIONAL RESOURCES
Please refer to the Aranet PRO User Manual for detailed instructions
https://aranet.com/product/aranet-pro/user-manual/
To view Terms & Conditions visit https://aranet.com/terms-and-conditions/
To view Returns & Guarantees visit https://aranet.com/returns-guarantees/
To fill RMA form visit https://aranet.com/rma/
SCAN QR CODE TO SEE THE ARANET PRO USER MANUAL
https://aranet.com/product/aranet-pro/user-manual/
The information presented in this guide is the property of SAF Tehnika, JSC. No part of this document may be reproduced or transmitted without proper permission from SAF Tehnika, JSC.
The specifications or information contained in this document are subject to change without notice due to continuing introduction of design improvements. If there is any conflict between this document and compliance statements, the latter will supersede this document.
SAF Tehnika, JSC has no liability for typing errors in this document or damages of any kind that result from the use of this document. To get up to date information about accessories and their availability, please contact sales representative.
Copyright © 2021 SAF Tehnika, JSC. All rights reserved.
References
- Aranet PRO base station - Aranet
- Wireless monitoring - Aranet PRO IoT monitoring solution
- RMA / Repairs - Aranet
- Aranet - Smarter Than Others
- Terms & Conditions - Aranet