American Express 09 Steel Carport Owner’s Manual
- September 7, 2024
- American Express
Table of Contents
American Express 09 Steel Carport
Product Information
Specifications
- Model No.: 12’x20’x09′
- Recommended Safety Gear: Gloves, Eye Protection, Long Sleeves
- Recommended Cleaning Method: Mild soap solution, Automotive type wax
Product Usage Instructions
Safety & Maintenance
Safety precautions MUST be followed at all times throughout the construction
of your building. Care must be taken when handling various pieces of your
building since many contain sharp edges. Please wear work gloves, eye
protection, and long sleeves when assembling or performing any maintenance on
your building.
Important Notes on Anchoring
NEVER concentrate your weight on the roof of the building. When using a
step ladder, make sure that it is fully open and on even ground before
climbing on it.
Exterior Care
Keep children and pets away from the worksite during construction and until
the building is completely assembled. For a long-lasting finish, clean and wax
the exterior surface with a mild soap solution. Avoid power washing. Use spray
automotive wax periodically, especially in high humidity or coastal regions.
Rust Protection
Store combustibles and corrosives in airtight containers. Clean corrosive
chemicals off surfaces immediately. Regularly check fasteners and retighten as
necessary. Wash off inked part numbers on panels with soap and water.
Assembly Tips & Tools
Watch the weather closely and choose a dry and calm day for assembly. Avoid
windy or wet conditions. Use teamwork – have two or more people for faster and
safer assembly. One person can hold parts while the other fastens them
together.
FAQ
Q: What should I do if I’m missing parts during assembly?
A: Double-check the parts list and hardware before starting assembly. Contact
customer support if parts are missing to avoid any safety issues or structural
damage to the building.
Model No. 12’x20’x09’
See Inside for Detailed Safety Information.
Owner’s Manual & Assembly Guide
Gloves must be worn at all times to reduce risk of injury!
SAFETY & MAINTENANCE
Safety precautions MUST be followed at all times throughout the construction of your building!
-
Care must be taken when handling various pieces of your building since many contain sharp edges. Please wear work gloves, eye protection and long sleeves when assembling or performing any maintenance on your building.
-
Practice caution with the tools being used in the assembly of this building. Be especially familiar with the operation of all power tools.
-
Do NOT attempt to assemble your building on a windy day. The large panels can catch the wind like a “sail”, causing them to be whipped around making construction difficult and unsafe.
Do NOT attempt to assemble your building before double checking that you have all the parts indicated on the parts list as well as all hardware. Any building left partially assembled may be seriously damaged by even light winds. -
NEVER concentrate your weight on the roof of the building. When using a step ladder make sure that it is fully open and on even ground before climbing on it.
-
Keep children and pets away from the worksite during construction and until the building is completely assembled. This will help avoid distractions and any accidents which may occur.
IMPORTANT NOTE ON ANCHORING
- Your building MUST be anchored to prevent wind damage. See anchoring page for more info.
- You must also have a temporary anchoring system in place in case you need to take a break from assembly.
Exterior Care:
- For a long lasting finish, clean and wax the exterior surface. We recommend washing with a mild soap solution. DO NOT use power washing to clean your shed. Using a spray automotive type wax periodically on the exterior is highly recommended if you are in a high humidity or coastal climate region.
- Combustibles and corrosives must be stored in air tight containers designed for chemical and/or combustible storage. Corrosive chemicals such as fertilizers, pesticides and herbicides should be cleaned off the interior and exterior surfaces immediately. Rust caused by chemical damage is not covered by the warranty.
- Rust protection precautions may help to stop rust from developing, or stop it quickly as soon as it appears.
- Avoid nicking or scraping the coating surface, inside and out.
- Keep roof and base perimeter free of debris and leaves which may accumulate and retain moisture. These can do double damage since they give off acid as they decay.
- Touch up scrapes or nicks and any area of visible rust as soon as possible. Make sure the surface is free of moisture, oils, dirt or grime and then apply an even film of high quality touch-up paint.
- Various paint manufacturers provide products for rust treatment and coverage. If surface rust does appear on your shed we recommend treating those areas as soon as possible, following the paint supplier of your choice instructions.
- Our customer service department can provide the paint tinting formula for matching the color of your shed. We also have touch-up paint available for repairing small nicks and scratches.
Roof: Keep the roof clear of leaves and snow. Heavy amounts of snow on
the roof can damage the building making it unsafe to enter.
Fasteners: Regularly check fasteners and retighten as necessary.
General : Wash off inked part numbers on coated panels with soap and
water.
Please note, Manufacturer cannot be held responsible for any consequences due
to buildings that are not installed per these instructions, or for damage due
to weather conditions or acts of God.
Keep these assembly instructions a nd owner’s manual for future reference.
ASSEMBLY TIPS & TOOLS
Watch the Weather Closely : Be sure the day you choose to install your
building is dry and calm. Do NOT attempt to assemble your building on a windy
day. Be careful on wet or muddy ground.
Use Teamwork: Two or more people are required to assemble your building.
One person can hold the parts or panels in place while the other person
fastens them together and handles the tools. This makes the process of
assembling your building faster and safer.
Tools and Materials: Here is a list of some basic tools and materials you
will need to assemble your building. Decide which method of anchoring and the
type of base you will use to make a complete list of the materials you will
need.
WHAT YOU NEED
- Work Gloves
- Safety Glasses
- Nut Driver or Wrench
- Step Ladder 8’
- Power Drill (Cordless, Variable Speed)
- Pliers
- Utility Knife or Scissors
- Carpenter’s Level
- Tape Measure
- Clamp
- Grout (Asphalt Base)
- 7/8” x 13” Masonry Bit (Asphalt Base)
- 1/2” x 8” Masonry Bit (Concrete Base)
RECOMMENDED TIME SAVERS
- Square
- String (for squaring the frame)
- Awl (to align holes)
How to Select and Prepare Your Building Site:
Before you start to assemble your building, you will want to decide on a good
location. The best location is a level area with good drainage.
- Allow enough working space so it is not difficult to move parts into position for assembly. Also, there needs to be enough space outside the building to be able to fasten the panel screws from the outside.
- Before assembling any parts, your base should be constructed and an anchoring system should be ready to use.
DIMENSION
PARTS
INSTALLATION
- Install part 1 and 2 by using part 14 on the appropriate position.
- Put part 3,4 and 5 together to be the first frame.
- Use part 14 and 5A to fasten the tube.
- Install part 8 by using part 14.
- Put the frame on the tube by using part 14 and 5A.
- Install part 6 on top and use part 14 to connect.
- Put part 9 on bottom tube and use part 13 to fix the arch frame.
- Put part 10 on frame top and use part 14 to fix.
- Install like below drawing shown to you.
- Part 11 is straight and hard, you need to cut it to be arch-shaped by yourself to the shoulder tube.
- Install part 12A and part 12 like below drawing shown to you.
- Install part 15 on top of the frame.
Confirm that all the hardware and parts are present before attempting to
assemble your storage unit.
Note : Attention to timely snow removal!