Fosi Audio K5 Pro Gaming DAC and Headphone Amp User Manual
- June 3, 2024
- Fosi Audio
Table of Contents
K5 Pro Gaming DAC and Headphone Amp
User Manual
Product Specifications
The KS Pro is a mini stereo gaming DAC amplifier for PC, Sony PSS, PS4 and
Nintendo Switch to level up your game audio.
It’s an incredible compact DAC giving enjoyable experience to both gamers and
music enthusiasts.
Compatibility | PC, Mac, PS5, PS4, PS4 Pro, Nintendo Switch, Phone |
---|---|
Input Type | USB-C, Optical, Coaxial, 3.5 mm mic |
Output Type | 3.5 mm headphone jack/line-out, RCA |
USB Sampling Rate | Up to 24 bit/96 kHz |
Optical/Coaxial Sampling Rate | Up to 24 bit/192 kHz |
Headphone Impedance Supported | 16-300 0 |
Power Input | DC 5V via USB-C |
Output Power | 1000mw@160 |
500mw@320
300mw@640
150mw@1280
80mw@3000
THO| <0.003%
SNR| >110dB
Dimensions| 4.4×3.7×1 .2 in (112x95x30mm)
Net Weight| 0.55 lb (251g)
Product Overview & Control Functions
Package Contents
- Fosi Audio K5 Pro Mini Stereo Gaming DAC …………………… x1
- 2-in-1 USB Type-A/C to Type-C Cable ……………. x1
- 3.5 mm Headphone Splitter ………………………….. x1
- User Manual ………………………….. x1
Quick Setup (USB Input Mode)
Prepare: KS Pro, PC/MAC/PSS/PS4/PS4 Pro/Switch, 2-in-1 USB Type-C cable,
3.5 mm headphone splitter, headphones or powered speakers/sound bar.
Step 1: Connect KS Pro to your PC/MAC/gaming console via the USB Type-C
cable. For PSS, please use the Type-C to Type-C form of the USB cable to
connect KS Pro to your PSS’s Type-C port on the front panel. Type-A to Type-C
cable could not start up the KS Pro.
Step 2: Connect your headphones to KS Pro’s headphone and microphone
jacks via the 3.5 mm headphone splitter, or connect the powered speakers or
sound bar to KS Pro’s RCA output socket or headphone jack;
NOTE: If your headphones don’t have microphone or you don’t need to
speak, just connect your headphones to the 3.5 mm headphone jack without the
splitter.
Step 3: Long press the multi-function knob till the Input Mode Indicator
lights up blue to turn on KS Pro;
Step 4: Short press the multi-function knob to select USB input mode, the
USB mode light will stay on blue;
Step 5: Left click the sound icon on your PC/MAC and change the sound
output device to “Fosi Audio KS Pro”;
Step 6: Play the music on your PC/MAC;
Step 7: Turn up the volume until you hear the sound clearly and then
enjoy.
NOTE 1: Please turn down the volume to the minimum before powering on KS
Pro;
NOTE 2: The volume control knob combines the power switch and mode
switch. You can long-press to turn on and turn off, short press to switch
between modes;
NOTE 3: The KS Pro can’t connect the passive speakers directly. You need
to connect it to an amplifier, which Fosi Audio also provides, to drive your
passive speakers.
Quick Setup (Optical/Coaxial Input Mode)
NOTE: In optical and coaxial input modes, the KS Pro does not support
microphone.
Prepare: KS Pro, SV AC adapter, USB Type-C cable, 3.5 mm headphone
splitter, powered speakers/sound bar, device with optical output or coaxial
output (TV for example), optical cable or coaxial cable (not included in the
package).
Step 1: Connect the USB Type-C Cable to the AC adapter (or any other DC
SV phone charger or computer USB connector), then connect the USB Type-C cable
to KS Pro;
Step 2: Connect the TV to KS Pro via optical or coaxial cable;
Step 3: When connecting via optical, set the TV’s sound output type to
RAW/PCM;
Step 4: Long press the multi-function knob to switch on KS Pro;
Step 5: Short press the multi-function knob to select OPT or COA input
mode;
Step 6: Turn up the volume and enjoy!
NOTE: Some devices’ default sound output is Dolby or DTS type, which KS
Pro DOES NOT support. Please remember to select RAW/PCM sound type on your
device, otherwise you will hear a lot of noise or no sound output.
Troubleshooting/QA
1: No sound from the microphone.****
– Please make sure all cables are well connected.
– Please make sure your headphone has a microphone. PC default path: Setting-
Microphone-Allow accessing to your microphone.
– Please make sure the Record on your PC sound settings is set to “Fosi Audio
KS Pro”. PC default path: Sound settings-Record Choose “Fosi Audio K5 Pro”.
– Please make sure the KS Pro is in USB input mode. In optical and coaxial
input mode, the KS PRO DOES NOT support microphone.
– Please make sure the microphone permission is enabled on the audio source
device.
2: Why it can not be turned on when connecting to PS5 ?****
– The USB cable included in the package has two forms. Please use Type-C to
Type-C form to connect KS Pro to your PS5’s
– Type-C port on the front panel. KS Pro cannot be powered on if you use the
Type-A to Type-C form to connect.
3: Wow! So now I can connect to pretty much any TVs and many gaming consoles, as well as PC and MAC?****
– Yes. Other devices with Type-C port like mobile phones, tablets, iPad Pro, etc. are also supported. Fosi Audio KS Pro is super-versatile.
4: How do I power on the KS Pro Mini stereo DAC?****
– Besides the USB Type-C Cable included in the package, you’ll also need a SV power adapter with USB output, such as your cell phone’s charger or power bank, or just connect to your PC via the USB Type-C Cable. Note: When you plug the USB Type-C Cable into the KS PRO and long press the multi-function knob, if you see the Input Mode Indicator is on, that means the connection is up.
5: Why do I get endless white noise?****
– Please check if the input mode selection is correct.
– The KS PRO supports 3.5mm headphone output and RCA sound output
simultaneously. You can check if the headphone output is normal or not when
you find the RCA output has no sound.
– Please try to replace the RCA cable and test again.
– Please check that if your input device is playing Dolby/DTS audio or not, If
yes, please change it to RAW/PCM type and try again.
6: Does KS Pro support Microsoft Xbox?****
– It doesn’t support the latest Xbox Series X or Series S since they do not support the UAC 1.0 or UAC 2.0 protocol. For Xbox One X, Xbox One Sand Xbox One, you can connect the console to KS Pro via the optical, which only supports audio output but microphone not supported.
7: No Dolby/DTS audio and I still get noise through the USB input?****
– Please try to connect the USB Type-C cable to the other USB ports on your
PC. Some USB ports may have unstable data transmission so please try to swap
it.
– Please try it on another computer.
– Please replace the USB Type-C cable and retest.
8: The KS PRO is not recognized on Windows?****
– Click Start menu, then type device manager in the Search box and then select
Device Manager.
– Expand Universal Serial Bus controllers. Press and hold (or right-click) a
device and select Uninstall. Repeat for each device.
– Once completed, restart your computer. Your USB controllers will
automatically install.
– If Windows update causes the device to be unrecognized, please update all
windows components and reboot and retest. Please contact us if the problem
still insists.
9: How to do plug-and-play on Windows?****
– Just click the sound icon in your notification area.
– Click the “Select playback device” option.
– Select the playback device “Fosi Audio KS Pro”.
10: I can’t play Spotify music in Plug-and-Play mode?****
– Please exit the Spotify app and switch the playback device to the computer’s own sound card device, open Spotify and play, confirm that it works, and then switch the playback device to “Fosi Audio KS Pro”.
11: How do I get the highest 24Bit/96kHz resolution on my PC?****
– Right-click the PC sound icon in the right bottom notification area, open Volume Mixer, click the icon of the device/SPDIF: “Fosi Audio KS Pro” to open the Properties, click the Advanced, select 24Bit/96kHz for maximum sound quality output.
12: Why do I get an intermittent sound via the USB connection?****
– Please try to connect the USB Type-C cable to the other USB ports on your
PC. Some USB ports may have unstable data transmission. Normally speaking,
it’s better to use the USB port on the rear panel of the computer console.
– Please replace the USB Type-C cable and retest. Contact us if the problem
still insists.
13: Why the sound cuts in or out?****
– Try to reduce the sound of your device.
– Try to exchange your audio source and cables to test, if still so then there
may be some problem with the KS Pro.
14: Why does my device stop working after a short time of use?****
– Make sure your audio source devices and the headphones, amplifier, or active speakers you connect are working well. And please check over all the connections of the input and output cables. Then you can try to change the audio input source, output devices, and cables to test again. Also please check if the power supply works.
For any other problems, please send us email via the following address: support@fosiaudio.com
Comparison Section
Model | DAC Q4 | DAC KS Pro |
---|---|---|
Picture | ||
Headphone Output Impedance | 16-2000 | 16-3000 |
Input | USB + OPT + COA | USB + OPT + COA + Microphone |
Output | 3.5mm Headphone+ RCA | 3.5mm Headphone+ RCA |
Treble & Bass Control | Yes | Yes |
Warranty Information
- All Fosi Audio products have a 18-month limited warranty on parts and labor from the date of purchase. Please contact us if you have any problems.
About Fosi Audio
- Fosi Audio designs and builds innovative audio products with all your music in mind. Great sound, simple but elegant designs, high-quality materials, and truly useful features are what Fosi Audio pursues. We sincerely hope you get as muchenjoyment from our products as we’ve had to create them!
Our website: www.fosiaudio.com
Amazon store:
www.amazon.com/fosiaudio
Our Voutube channel: Fosi Audio
Our Facebook page: Fosi Audio
After-sales Service and Technical Support Email:
support@fosiaudio.com
https://h5.shengcai.net/wwei/url?url=H666G_V7w6G
Fosi Audio Products’ User Manuals
Documents / Resources
| Fosi
Audio K5 Pro Gaming DAC and Headphone
Amp
[pdf] User Manual
K5 Pro Gaming DAC and Headphone Amp, K5 Pro, Gaming DAC and Headphone Amp,
Headphone Amp, Amp
---|---