CRYSTORAMA 5264-OS-CL-MWP Mercer Seven Light Chandelier Instruction Manual
- June 12, 2024
- CRYSTORAMA
Table of Contents
CRYSTORAMA 5264-OS-CL-MWP Mercer Seven Light Chandelier
Product Information
The product is a lighting fixture with model number 5264-OS-CL-MWP. It is manufactured by Crystorama and has a history of sixty years in the industry. The fixture is damp rated and can be used in various settings. The product includes various parts such as crystal sets, canopy, collar ring, collar loop, ball nuts, chain, fixture loop, check ring, threaded nipple, and rods. These parts are essential for the installation and assembly of the fixture. It is important to note that all electrical components must be installed by a licensed electrician in accordance with the National Electric Code and local electrical codes. The fixture requires 6 Candelabra Base Bulbs and 1 Medium Base Bulb. It is recommended to use LED bulbs for extended use. The maximum wattage for the bulbs should not exceed 60 Watts.
There is a warning regarding the product’s exposure to Lead, which is known to cause cancer and/or birth defects or reproductive harm. For more information, users can visit www.p65warnings.ca.gov.
ASSEMBLY INSTRUCTION
WARNING:
All electrical components must be installed by a licensed electrician in
accordance with the National Electric Code and the appropriate local
electrical codes
You will need 6- Candelabra Base Bulb and 1-Medium Base Bulb. 40 Watts recommended 60 Watts Max. USE LED BULBS FOR EXTENDED USE The fixture is Damp rated
HOW TO INSTALL
Place the fixture parts on a soft cloth-covered platform before installation of fixture.
For Hanging
- Lock the threaded nipple into the coupling of the fixture body then put the rod and the check ring onto the threaded nipple and lock them with the fixture loop.
- Hang the basket ring on the crossbar of the fixture body using the hooks attached to the basket ring.
- Install the mounting plate onto the outlet box.
- Decide the desired hanging height and adjust the chain to the correct length.
- Raise the fixture up and do the wire connection. Attach the canopy over the mounting plate and secure with ball nuts.
- Dress the crystals as illustrated.
For Ceiling
- Same installation step#1 and #2 as above for the hanging.
- Remove the fixture loop from the fixture body and the loop from the ceiling canopy. Place the canopy over the top of the fixture body and secure with the ball nuts.
- Dress the crystals as illustrated.
WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and/or birth defects or reproductive harm.For more information go to www.p65warnings.ca.gov
Product Usage Instructions
Before installation, place the fixture parts on a soft cloth-covered platform.
Hanging Installation
- Lock the threaded nipple into the coupling of the fixture body. Attach the rod and check ring onto the threaded nipple and lock them with the fixture loop.
- Hang the basket ring on the crossbar of the fixture body using the attached hooks.
- Install the mounting plate onto the outlet box.
- Determine the desired hanging height and adjust the chain to the correct length.
- Raise the fixture up and make the wire connection. Attach the canopy over the mounting plate and secure with ball nuts.
- Dress the crystals as illustrated.
Ceiling Installation
- Follow steps 1 and 2 mentioned above for hanging installation.
- Remove the fixture loop from the fixture body and the loop from the ceiling canopy. Place the canopy over the top of the fixture body and secure with ball nuts.
- Dress the crystals as illustrated.
Ensure to follow all safety precautions and consult a licensed electrician if needed during the installation process.