SISTEMA LEDZOOM200COB 150W RGBW COB LED Flood Light User Manual

: June 12, 2024
: Sistema

Table of Contents

SISTEMA LEDZOOM200COB 150W RGBW COB LED Flood Light
Menu
DMX Channels
Operation and Mode illustration
Dimmer Speed
Read User Manual Online (PDF format)
Download This Manual (PDF format)

SISTEMA LEDZOOM200COB 150W RGBW COB LED Flood Light

Product Information:

The LEDZOOM20 0 COB is a 150W RGBW COB LED light. It comes with various menus and functions to provide different lighting effects. The product supports DMX mode, slave mode, CTO mode, and dimmer mode. It also has options for adjusting dimming curves, dimming speed, and DMX signal. The product has a temperature detection feature and a unique UID for identification purposes.

Product Usage Instructions:

To navigate through the menus, press the MODE button, UP button, or DOWN button.
In AUTO mode, the light will run built-in programs. Use the Color and Speed options to adjust the program settings.
In Program mode, select a program number from 1 to 16. Use the Speed option to adjust the program speed.
In DMX mode, set the DMX address and number of channels.
In Slave mode, choose Yes or No to enable or disable the slave function.
In CTO mode, adjust the CTO value and zoom level.
In Dimmer mode, select a dimming curve and adjust the dimming speed.
In the Settings menu, configure options like DMX fail, fan mode, DMX sync, lock, key backlight, and factory reset.
In the Information menu, view the product version and temperature.

Note: Refer to the user manual for detailed information on specific menu options and their corresponding values.

Menu 1	Menu 2	Menu 3	Functions
1:AUTO	Yes/No		Auto run mode

2:Program

| 1)Mode:| 1-16| Built-in Program
2)Color:(Mode:1)| 1-33| Static Color
2)Speed:(Mode:2-16)| 1-100| Speed
3)Strobe:| 0-99| Strobe
4)Zoom:| 000~255| Zoom

3:DMX

5:CTO

| 1)CTO:| 2700K/3200K/4500K/5400K/6500K| CTO mode
2)Zoom:| 000~255|

6:Dimmer

| 1)Red:| 000~255|

Dimmer mode

2)Green:| 000~255
3)Blue:| 000~255
4)White:| 000~255
5)Zoom:| 000~255

7:Settings

|

1)Curves Select:

|

1- 4

| Dimming curve

selection

2)Dimmer Speed:

|

Fast/ Smooth

| Dimming speed

selection

3)Dmx Fail:

|

Off/Hold

| DMX signal

option

4)Fan Mode| On/Off| Fan mode

5)Dmx Sync:

|

On/Off

| DMX

Synchronization setting

8:Information

| Versions: x.x| | Version display

Temperature: xx℃

| | Temperature

detection

UID: XXXX XXXX XXXX| | UID

DMX Channels

Function	DMX Value	Setting	5-Ch	7-Ch	12-Ch
Dimmer	000-255	0~100%		1	1

Strobe

Linear

| 0-10| No function| |

2

|

2

11-255| strobe linear from slow to fast

Strobe FX

| 0-10| No function| | |

3

11-255| strobe randomly from slow to fast
CTO| 000-015| No function| | | 4
| 016-063| 2700K| | |
---|---|---|---|---|---
064-111| 3200K
112-159| 4500K
160-207| 5400K
208-255| 6500K

Color preset

| 000-007| No function| | |

5

Color program

| 000-015| No function| | |

6

016-031| Jump1
032-047| Jump2
048-063| Jump3
064-079| Jump4
080-095| Jump5
| 096-111| Jump6| | |
---|---|---|---|---|---
112-127| Jump7
128-143| Jump8
144-159| Fade1
160-175| Fade2
176-191| Fade3
192-207| Fade4
208-223| Fade5
224-239| Fade6
240-255| Fade7
Color

program speed

|

0-255

|

Speed from slow to fast

| | |

7

Red| 000-255| 0~100%| 1| 3| 8
Green| 000-255| 0~100%| 2| 4| 9
Blue| 000-255| 0~100%| 3| 5| 10
White| 000-255| 0~100%| 4| 6| 11
Zoom| 000-255| 0~100%| 5| 7| 12

Operation and Mode illustration

Operation Mode Transformation

Press the MODE, UP or DOWN button to transform menus.

1: AUTO

2: Program
3: DMX
4: Slave
5: Dimmer
6:Settings
7:Information

operation description

AUTO
Auto run mode，it will run built in Program Mode:02~ Program Mode:16, the speed, strobe, focus position, cycle running

Auto Yes No

b、Built- in Program

There are 16 built-in programs. Please press the setup button to enter and up or down button to select. As follows:
Mode:01 Static color effect program

Mode:01

| Color:| 01~33
---|---|---
Strobe:| 00~99
Zoom:| 000~255

Mode:02~16 built-in effect program

Mode:02~16	Speed:	001~100
	Strobe:	00~99
---	---	---
Zoom:	000~255

DMX mode
Press the setup button to enter and select by the up or down button. As follows:

DMX

Address :| 001~512
Channels:| 5/7/12-ch

d、Slave mode SLAV
After connecting the DMX cable, the light will run with the master fixture at the same step.

Slave Yes No

CTO mode

Press the setup button to enter and select by the up or down button. As follows:

CTO

| CTO:| 2700K/3200K/4500K/5400K/6500K
---|---|---
Zoom:| 000~255

f、Dimmer mode
Press the setup button to enter and select by the up or down button. As follows:

Dimmer

| Red:| 000~255
---|---|---
Green:| 000~255
Blue:| 000~255
White:| 000~255
Zoom:| 000~255

Settings mode
Press the setup button to enter and select by the up or down button. As follows:

Settings

| Curves Select
---|---
Dimmer Speed
DMX Fail
Fan Mode
Dmx Sync
Lock
Key Backlight
Factory

Dimming curve setting
There are four available dimming curves. Please press the setup button to enter and select by the up or down button.

Curves Select

| 1 )linear
---|---
2)Square Law
3)Inv Square Law
4)S-Type

linear dimming

Dimmer Speed

Please press the setup button to enter and select by the up or down button

Dimmer Speed

| Fast
---|---
Smooth

DMX Fail console DMX signal clear
Please press the setup button to enter and select by the up or down button.

DMX Fail

| Off| (When DMX signal connection fail, light off)
---|---|---
Hold| (When DMX signal connection fail，light keeps

current state)

Fan Mode

Fan Mode

| On(intelligent control, the fan speed

rotation according to temperature)

---|---
Off(Turn off the fan and reduce the

power to control the temperature)

Dmx Sync

In DMX mode, several fixtures can also operate at the same step, even though no DMX control for a period of time. Please press the setup button to enter and select by the up or down button. As follows

Dmx Sync

| On
---|---
Off

Lock

Lock	On

Off

Key Backlight

Key Backlight On Off

Factory reset

Factory Yes No
All data will restore initial state after factory sets. Please press the setup button to enter and select by the up or down button. As follows：

Information mode
Store relevant information, as follows:

Information

| Versions: x.x
---|---
Temperature: xx℃
UID:xxxxxxxxxxxx

RDM(Remote Device Management)

This fixture has RDM function. RDM is the protocol which supports two-way traffic in standard DMX512. Configure and monitor fixture, like change DMX address, DMX mode and so on. Every fixture with RDM can be recognized by built-in UID code

Parameter ID	Discovery command	SET command	Get command
DISC_UNIQUE_BRANCH	*
DISC_MUTE	*
DISC_UN_MUTE	*
DEVICE_INFO			*
SOFTWARE_VERSION_LABEL			*
DMX_START_ADDRESS		*	*
IDENTIFY_DEVICE		*	*
SUPPORTED_PARAMETERS			*
SENSOR_DEFINITION			*
SENSOR_VALUE			*
DMX_PERSONALITY		*	*
DMX_PERSONALITY_DESCRIPTION			*
RESET_DEVICE		*
FACTORY_DEFAULTS		*

Notice

If no press any button in 30s, it will lock screen automatically and show current operating mode, WDMX mode, temperature status and battery(this battery is reference value, changes for on and off is very large). Of course, it will unlock again by pressing the mode and setup button for 3s at the same time. Press mode and setup button at the same time to quickly lock under unlock status (Lock need to be YES in Setting).
When the product power’s on and shows version information, pressing the “MODE” and SETUP” buttons for some seconds at the same time. After this, it can restore factory
settings and the data will be initialized.
In order to avoid any problem, please follow the user manual to make sure it is in safety operations.
If the environment temperature is not in the using range, please reduce the using time of the full power to prevent products damaged because of overheating.
When the product power is on, the LED display screen shows temperature “×”. Or it shows ×℃ when locking screen. It means temperature anomalies. please check whether lines of internal temperature control connect well.
In order to prevent the accident, please don’t tear down the light under the condition of charging.