sistema SILENT12 Moving SILENT12 Beam Light User Manual
- June 12, 2024
- Sistema
Table of Contents
sistema SILENT12 Moving SILENT12 Beam Light
PRODUCT INFORMATION
Unpacking
The following items are included in the box:
- One SILENT12 fixture
- User manual
Safety Instructions
Warning!!! To reduce the risk of fire, electric shock, or injury to
persons, follow these important safety instructions:
- This product is suitable for indoor use only.
- Always turn off, unplug power and allow fixture to cool before servicing.
- Ensure that fixture is properly grounded.
- Please keep this User Guide for future consultation.
- Always make sure that you are connecting to the proper voltage and that the line voltage you are connecting to is not higher than that stated on decal or rear panel of the fixture.
- Always disconnect from power before servicing or replacing fuse.
- Make sure power cord is never crimped or damaged.
- Do not look into the beam from a distance of less than 40 cm (16 inches).
- Do not stare into the beam for extended periods at a short distance.
Caution! Avoid looking directly into the LED light beam at a close distance!
Features
- Flicker-free operation
- Smooth color mixing by RGBWA 5in1 LEDs
- 5 working modes: DMX, Auto, Sound, Manual, Master/Slave
- DMX channels: 9/6 ch.
- Linear dimmer 0-100%
- Strobe 1-25 flash per second
- 4-button LED display
- IP65 for indoor and outdoor use only
Product Overview
The SILENT12 fixture has the following ports:
- DMX IN
- DMX OUT
- POWER IN
- POWER OUT
SETUP
Mounting
This controller can be mounted in any SAFE position provided there is enough
room for ventilation.
IMPORTANT!!! Safety cables must always be used. The safety cable must be
capable of holding 10 times the weight of the fixture.
Fixture Linking
To run your light shows of one or more fixtures using a DMX-512 controller
or to run synchronized shows on two or more fixtures in master/slave operating
mode, you need DMX cables to link the units from DMX IN to DMX OUT.
OPERATION INSTRUCTIONS
Control Panel
The control panel has the following buttons:
- MENU: To scroll over the main menu
- UP: To increase the value.
- DOWN: To decrease the value.
- ENTER: To confirm setting
The control panel has the following functions:
| Menu | Function |
|---|---|
| A001-512 | 9 DMX channel mode, set address 001-512 |
| d001-512 | 6 DMX channel mode, set address 001-512 |
| CC00-99 | Color step changing from slow to fast |
| CP00-99 | Color cross fade from slow to fast |
| dE00-99 | Color pulse changing from slow to fast |
| dEdF | Color changing to sound |
| r000-255 | Set display backlight on/off |
| G000-255 | Manual control of Red |
| b000-255 | Manual control of Green |
| o000-255 | Manual control of Blue |
| Y000-255 | Manual control of White |
DMX Mode
The SILENT12 fixture has 9 DMX channels with the following functions:
| Channel | Function | DMX Value |
|---|---|---|
| 1 | Master dimmer | 0 – 100% |
| 2 | Red Intensity | 0 – 100% |
| 3 | Green Intensity | 0 – 100% |
| 4 | Blue Intensity | 0 – 100% |
| 5 | White Intensity | 0 – 100% |
| 6 | Amber Intensity | 0 – 100% |
| 7 | Strobe | 0 – 10, 11 – 250, 251 – 255 |
| 8 | No function | 61 – 110, 111 – 160, 161 – 210, 211 – 255 |
| 9 | Static color selection or Macro speed from slow to fast | 0 – 255 |
Product Usage Instructions
Follow the below instructions to use the SILENT12 product:
- Unpack the product and ensure all items are present.
- Mount the controller in a safe position with enough room for ventilation. Use safety cables capable of holding 10 times the weight of the fixture.
- Link one or more fixtures using a DMX-512 controller or run synchronized shows on two or more fixtures in master/slave operating mode using DMX cables to link the units from DMX IN to DMX OUT.
- Connect the fixture to a switched circuit with a suitable Earth Ground and AC power of 100V – 240V 50-60Hz.
- Turn on the fixture and use the control panel buttons to select one of the following modes: DMX, Auto, Sound, Manual, or Master/Slave.
- In DMX mode, use the control panel buttons to set the DMX channel mode and address (001-512) and adjust the Master dimmer, Red, Green, Blue, White, Amber intensity, and Strobe settings as desired.
- In Manual mode, use the control panel buttons to manually control the Red, Green, Blue, White, and Amber intensity.
- In Auto mode, the fixture will automatically change colors, cross fade, pulse, or change to sound.
- In Sound mode, the fixture will change colors to sound.
- In Master/Slave mode, the fixture will run synchronized shows with other fixtures.
Unpacking
The following items are included in the box:
- 1 x Silent12
- 1 x Power cable
- 1 x Mounting bracket
- 1 x User Manual
Safety Instructions
Warning!!! To reduce the risk of fire, electric shock, or injury to persons, follow these important safety instructions:
- This product is suitable for indoor use only.
- Always turn off, unplug power and allow fixture to cool before servicing.
- Ensure that fixture is properly grounded.
- Please keep this User Guide for future consultation.
- Always make sure that you are connecting to the proper voltage and that the line voltage you are connecting to is not higher than that stated on decal or rear panel of the fixture.
- Always disconnect from power before servicing or replacing fuse.
- Make sure power cord is never crimped or damaged.
- Do not look into the beam from a distance of less than 40 cm (16 inches).
- Do not stare into the beam for extended periods at a short distance.
Caution!
Avaid looking directly into the LED light beam at a close distance!
Features
- Flicker free operation
- Smooth color mixing by RGBWA 5in1 LEDs
- 5 working modes: DMX, Auto, Sound, Manual, Master/Slave
- DMX channels: 9/6 ch.
- Linear dimmer 0-100%
- Strobe 1-25 flash per second
- 4-button LED display
- IP65 for indoor and outdoor use only
Product overview
SETUP
Mounting
This controller can be mounted in any SAFE position provided there is enough
room for ventilation.
IMPORTANT!!! Safety cables must always be used. The safety cable must be
capable of holding 10 times the weight of the fixture.
Fixture Linking
To run your light shows of one or more fixtures using a DMX-512 controller or
to run synchronized shows on two or more fixtures in master/slave operating
mode, you need DMX cables to link the units from DMX IN to DMX OUT.
AC Power
The fixture is designed to work on AC 100V – 240V 50-60Hz. All units must be
powered directly from a switched circuit.
Warning!!! All fixtures must be connected to circuits with a suitable
Earth Ground.
OPERATION INSTRUCTIONS
Control Panel
- MENU: To scroll over main menu
- UP: To increase the value.
- DOWN: To decrease the value.
- ENTER: To confirm setting
Menu| Function
---|---
A001-512| 9 DMX channel mode, set address 001-512
d001-512| 6 DMX channel mode, set address 001-512
CC00-99| Color step changing from slow to fast
CP00-99| Color cross fade from slow to fast
dE00-99| Color pulse changing from slow to fast
dEdF| Color changing to sound
-on- / -oFF| Set display backlight on/off
r000-255| Manual control of Red
G000-255| Manual control of Green
b000-255| Manual control of Blue
o000-255| Manual control of White
Y000-255| Manual control of Amber
DMX Mode
9 DMX Channels
| Channel | DMX valude | Functions |
|---|---|---|
| 1 | 0 – 255 | Master dimmer 0 – 100% |
| 2 | 0 – 255 | Red Intensity 0 – 100% |
| 3 | 0 – 255 | Green Intensity 0 – 100% |
| 4 | 0 – 255 | Blue Intensity 0 – 100% |
| 5 | 0 – 255 | White Intensity 0 – 100% |
| 6 | 0 – 255 | Amber Intensity 0 – 100% |
7
| 0 – 10| No function
11 – 250| Strobe from slow to fast
251 – 255| Strobe to sound
8
| 0 – 10| No function
11 – 60| Stactic color selection by ch9
61 – 110| Color cross fade, speed from slow to fast by ch9
111 – 160| Color pulse changing, speed from slow to fast by ch9
161 – 210| Color step changing, speed from slow to fast by ch9
211 – 255| Sound activation
9| 0 – 255| Static color selection or Macro speed from slow to fast
6 DMX Channels
| Channel | DMX valude | Functions |
|---|---|---|
| 1 | 0 – 255 | Red Intensity 0 – 100% |
| 2 | 0 – 255 | Green Intensity 0 – 100% |
| 3 | 0 – 255 | Blue Intensity 0 – 100% |
| 4 | 0 – 255 | White Intensity 0 – 100% |
| 5 | 0 – 255 | Amber Intensity 0 – 100% |
6
| 0 – 10| No function
11 – 250| Strobe from slow to fast
251 – 255| Strobe to sound
Specifications
- Light source: 12 x 10W RGBWA 5-in-1 LEDs
- Optical lens: 40˚
- Power input: AC 100-240V 50-60Hz
- Size: 235120275 mm
- Weight: 5 kg
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>