sistema R2DSPOT60 60W Mini Moving Head Spot User Manual

: June 12, 2024
: Sistema

Table of Contents

sistema R2DSPOT60 60W Mini Moving Head Spot
INTRODUCTION
SETUP
OPERATION INSTRUCTIONS
Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

sistema R2DSPOT60 60W Mini Moving Head Spot

INTRODUCTION

Thank you for selecting the R2DSPOT60. This LED Moving Head is equipped with one 60W high power white LED, making it extremely bright. It offers DMX, Auto, Sound, Master/Slave modes and is ideal for small clubs, bars, parties, etc. Please read the user manual carefully before use to optimize the performance of this product.

Unpacking

The following items are included in the box:

1 x R2DSPOT60
1 x Power Cord
1 x User Manual

Carefully unpack the carton and check the contents to ensure that all parts are present and received in good condition. Contact your supplier immediately and retain packing material for inspection if any part is missing or damaged.

Safety Instructions

Warning!!! To reduce the risk of fire, electric shock, or injury to persons, follow these important safety instructions:

Caution! Avoid looking directly into the LED light beam at a close distance!

Features

DMX, Auto, Sound, Master/Slave modes
60W high power white LED
Ideal for small clubs, bars, parties, etc.

Product Overview

The R2DSPOT60 is a 60W Mini Moving Head Spot that is extremely bright and versatile in use.

SETUP

Control Panel

The control panel has DMX In/Out and Fuse/Power In.

Mounting

The Moving Head is fully operational in any mounting position, hanging upside- down, side mounted, or set on a flat level surface. However, safety cables must always be used when the unit is ceiling or truss mounted. The safety cable must be capable of holding 10 times the weight of the fixture.

IMPORTANT!!! All fixtures must be connected to circuits with a suitable Earth Ground.

AC Power

The R2DSPOT60 operates on AC 90-240V 50-60Hz and must be powered directly from a switched circuit. This unit cannot be run on a rheostat or dimmer circuit even if used solely for a 0% to 100% switching.

OPERATION INSTRUCTIONS

Menu Map

The menu map allows you to scroll through the main menu, exit from the current sub-menu, select the currently selected menu, or confirm the current function value. It offers various options such as DMX Address, DMX Mode, Speed Mode, Run Mode, Internal Program, Sound Control, X Reverse, Y Reverse, Display Reverse, Reset Default, and Home Position Setting.

DMX Channels

The R2DSPOT60 offers 5Ch and 15Ch DMX channels for various functions such as Pan, Pan Fine, Tilt, Tilt Fine, XY Speed from fast to slow, Dimmer 0-100%, Strobe closed, Strobe from slow to fast, White (Open), Color1-7, Forward color wheel rotating from fast to slow, Color wheel rotating stop, and Backward color wheel rotating from slow to fast.

Follow the above instructions carefully to optimize the performance of your R2DSPOT60. If you have any further questions or concerns, please refer to the user manual or contact our customer support team.

This manual contains important information.
Please read before operating fixture.

INTRODUCTION

Thank you for selecting this product. Equipped with one 60W high power white LED, this LED Moving Head is extremely bright. It offers DMX, Auto, Sound, Master/Slave. Ideal for small clubs, bars, parties, etc. To optimize the performance of this product, please read the user manual carefully before use.

Unpacking
The following items are included in the box:

1 x R2DSPOT60
1 x Power Cord
1 x User Manual

Carefully unpack the carton, check the contents to ensure that all parts are present, and have been received in good condition. Contact your supplier immediately and retain packing material for inspection if any part is missing or damaged.

Safety Instructions

Warning!!! To reduce the risk of fire, electric shock, or injury to persons, follow these important safety instructions:

The product is for indoor use only.
Always turn off, unplug power and allow fixture to cool before servicing.
Ensure that fixture is properly grounded.
Please keep this User Guide for future consultation.
Always make sure that you are connecting to the proper voltage and that the line voltage you are connecting to is not higher than that stated on decal or rear panel of the fixture.
Always disconnect from power before servicing or replacing fuse.
Make sure power cord is never crimped or damaged.
Caution!
Avaid looking directly into the LED light beam at a close distance!

Features

LED Spot moving head
1 color wheel: 7 colors + white, rainbow
1 Gobo wheel: 5 gobos + open, shaking
1 3-facet prism
Motorized focus
4 working modes: DMX, Auto, Sound, Master/Slave
DMX modes: 5/15 channels
Pan : 540° Tilt: 270°
Reverse Pan/Tilt movement
0-100% linear dimmer
1-25 fps strobe
4-button LED display

Product Overview

SETUP

Mounting
The Moving Head is fully operational in any mounting position, hanging upside- down, side-mounted, or set on a flat llevel surface, etc.
IMPORTANT!!! Safety cables must always be used when unit is celling or truss mounted. The safety cable must be capable of holding 10 times the weight of the fixture.

AC Power
The fixture is designed to work on AC 90-240V 50-60Hz. All units must be powered directly from a switched circuit. This unit cannot be run on a rheostat or dimmer circuit even if used solely for a 0% to 100% switching.
WARNING!!! All fixtures must be connected to circuits with a suitable Earth Ground.

OPERATION INSTRUCTIONS

Menu Map

1 Addr| DMX Address| 001-512|
---|---|---|---
2 ChMd| DMX Mode| .=CH10| 10CH DMX mode
| | .=CH15| 15CH DMX mode
3 SPMd| Speed Mode| .=Low| Low speed mode
| | .=High| High speed mode
4 SLMd| Run Mode| .=Master|
| | .=Slave|
5 SHMd| Internal Program| .=001| Show mode
| | .=002|
| | .=003|
| | .=004|
| | .=005|
| | .=006|
| | .=007|
| | .=008|
6 Soun| Sound Control| .=OFF| Sound Activation mode
| | .=ON|
7 PAN| X Reverse| .=OFF|
| | .=ON|
8 TIL| Y Reverse| .=OFF|
| | .=ON|
9 dISP| Display Reverse| .=OFF|
| | .=ON|
10 rFAC| Reset Default| .=OFF|
| | .=ON|
11 Ad t| Home Position

Setting

|

Delt

| Clear PAN and TILT Home

Position(3s)

| | P(PAN)| .=0-120
| | t(TILT)| .=0-120
| | C(Color)| .=0-120
| | g(Gobo)| .=0-120
| | F(Focus)| .=0-120
12 rST| Reset Motor| |

DMX Channels

5Ch		15Ch	DMX Value	Function
1		1	000 – 255	Pan
		2	000-255	Pan Fine
2		3	000 – 255	Tilt
		4	000-255	Tilt Fine
		5	000 – 255	XY Speed from fast to slow
		6	000-255	Dimmer 0-100%
	****	****

7

| 000-004| Strobe closed
| 005-250| Strobe from slow to fast
| 251-255| Strobe open
| |

8

| 000-013| White (Open)
| 014-031| Color1
| 032-049| Color2
| 050-067| Color3
| 068-085| Color4
| 086-103| Color5
| 104-121| Color6
| 122-130| Color7
| 131-139| White (Open)
| 140-195| Forward color wheel rotating from fast to slow
| 196-199| Color wheel rotating stop
| 200-255| Backward color wheel rotating from slow to fast
| |

9

| 000-008| Open(White)
| 009-033| Gobo1
| 034-058| Gobo2
| 059-083| Gobo3
| 084-108| Gobo4
| 109-133| Gobo5
| 134-194| Gobo rainbow CW from fast to slow
| 225-255| Gobo rainbow CcW from slow to fast
| ****

10

| 000-009| No function
---|---|---|---
010-129| Forward Gobo rotation from fast to slow
130-134| No rotation
135-255| Backward Gobo rotation from slow to fast
| 11| 000-255| Focus 0 – 100%
| ****

12

3

| ****

13

4

| ****

14

5

| ****

15

| 51-100| 6S for High speed mode
151-200| 6S for Low speed mode (For fade movement eﬀect)
251-255| 6S to RESET the ﬁxture

Specifications

Source: 1 x 60W white LED
Beam angle: 13°
Power consumption: 80W Max.
Power supply: 100~240V, 50-60Hz
Dimensions: 195 x 145 x 280 mm
Weight : 4.5 kg

IMPORTANT INFORMATION!
In order to optimize the recovery and recycling of the materials that old appliances contain and reduce the impact on human health and the environment, ensure that this product is recycled at the end of its life.