sistema LEDZOOM1210 12x10W RGBW 3 In 1 Par LED Light User Manual

: June 12, 2024
: Sistema

Table of Contents

A. SPECIFICATION
B. OPERATION
Read User Manual Online (PDF format)
Download This Manual (PDF format)

LEDZOOM1210
12x10W RGBW 3IN1 PARLED

USER MANUAL

Please read the manual before operation.

A. SPECIFICATION

Voltage: AC 100V-240V, 50Hz/60Hz
Power consumption: 130W
LED: 124-in-1 10W RGBW 21Tri-in-1 RGB backlight
Beam angle: 5°~60°
DMX channels: 6CH, 10CH, 14CH
Operation mode: LCD display
Working temperature: -10℃~40℃
Dimension: 204256286 mm
Net weight: 4.1kgs
DMX linking: 30pcs
Power linking: 4pcs/110V, 8pcs/240V
Luminance

RGBW(5°)	13650lux@2m
RGBW(60°)	1178lux@2m

B. OPERATION

There are eight working modes; press “MODE” button could switch the modes.

Auto running mode
Built-in Program mode
Dimming mode
Sound-active mode
DMX mode
Slave mode
Setting mode
Info mode

Auto running mode
This mode is Auto Running mode; when press MODE / UP / DOWN, the fixture will automatically run the programs according to the preset program
Built-in Program mode

This mode is Built-in Program mode. There are 10 built-in program modes; You could press “UP” or “DOWN”. 2) When choose ,press “SETUP” at first time can enter Built-in Program mode to set speed.
Press “UP” and “DOWN” to change the value 1-100. Press “SETUP” at second time can enter strobe speed setting. Press “UP” and “DOWN” to change the value 0-99.
When choose can enter static color mode, press “UP” and “DOWN” can choose thirty-five type of colors. Press “SETUP” again can set strobe value of color 0-99.

Static color mode

When press “MODE / UP / DOWN” to choose “MANUAL” can enter built in program setting mode. Press “UP” and “DOWN” to choose “DIMMER MODE”. Press “SETUP” to enter effect dimming program.

submenu	value	function
Red Gray:	0-255	R dimming effect 0-100%
Green Gray:	0-255	G dimming effect 0-100%
Blue Gray:	0-255	B dimming effect 0-100%
White Gray:	0-255	W dimming effect 0-100%
Flash	0-99	Strobe effect speed setting

Press “UP” and “DOWN” to choose “BACK DIMMER MODE”. Press “SETUP” to enter backlight dimming program.

submenu	value	function
B Red Gray:	0-255	R dimming backlight 0-100%
B Green Gray:	0-255	G dimming backlight 0-100%
B Blue Gray:	0-255	B dimming backlight 0-100%
Flash	0-99	Backlight strobe speed setting

Press “UP” and “DOWN” to choose “ZOOM MODE”. Press “SETUP” to enter lens setting program.

submenu	value	function
Zoom	0-255	Lens zoom 0-100%

Sound active Mode
This mode is sound-active mode , press the “SETUP” button can enter into sensitivity settings, could set the sensitivity value 0-31 via “UP” or “DOWN” button. When the value is 0, the sound active is no effect.
DMX Mode

Press the “MODE”, enter to set the DMX mode data settings, the LCD display show as below:
Press the “SETUP” button, LCD will show as below, enter DMX address value settings

You can set the DMX address value 001—512 through “UP” or “DOWN” button.
DMX working mode: 6CH, 10CH, 14CH
DMX Mode1: 6-Ch

Channel	Value	Function
1	0-255	Master dimming 0-100%
2	0-255	R 0-100%, Backlight R 0-100%
3	0-255	G 0-100%, Backlight G 0-100%
4	0-255	B 0-100%, Backlight B 0-100%
5	0-255	W 0-100%
6	0-255	Zoom 0-100%

DMX Mode2：10-Ch

Channels	Value	Function
1	0-255	Master Dimming 0-100%
2	0-255	R 0-100%
3	0-255	G 0-100%
4	0-255	B 0-100%
5	0-255	W 0-100%
6	0-15	Strobe closed
16-255	The larger value, the faster strobe
7	0-255	Zoom 0-100%
8	0-255	Backlight R 0-100%
9	0-255	Backlight G 0-100%
10	0-255	Backlight 13 0-100%

DMX Mode3：14-Ch

Channel	Value	Function
1	0-255	Master Dimming 0-100%
0-10	Dinming Function
11-17	Red
18-24	Flame Red
25-31	Deep Golden Amber
32-38	Millennium Gold
39-45	Gold Amber
46-52	Orange
53-59	Chrome Orange
60-66	Deep Amber
67-73	Spring Yellow
74-80

Master/slave Mode If LCD shows , enter master slave mode.
Restore Factory Setting If LCD shows , enter into settings menu.

The settings menu has two options: LCD Back Time settings, Factory Reset settings.
Press the “SETUP” button when in main menu; enter the state of select options, to set the options through “UP” or “DOWN” button.
1. LCD Back Time settings
2. If LCD show , press the “SETUP” button to set the time, can be set: 5s, 10s, 20s, 30s, On (Keep)
Factory Reset settings If LCD shows press the “SETUP” button to set the factory reset. Press the “SETUP” button to confirm “Reset Y/N”. Press the “UP” and “DOWN” button to switch these two options.
3. Dimmer Curves There are four dimming curve “Linear”, “Square”, “Inv Squa”, “S-Curve”. Press “UP” and “DOWN” button to select the curves. sistema
LEDZOOM1210 12x10W RGBW 3 In 1 Par LED Light - Dimmer
Curves Dim Mode
To select the mode of Dimming curves: “FAST” or “Smooth” through “UP” and “DOWN” button.

Info mode Press the “MODE” button, the LCD will show , enter to get product information.
1. If LCD show , press the “SETUP” button to check the software version.
2. If LCD show , press the “SETUP” button to check the temperature control state. If LCD show “Normal”, it means the temperature control is normal; If LCD show “Warning error!”, it means abnormal temperature control work.