sistema SMARTCANSPOT65 20W Battery Powered PAR LED Light User Manual

sistema SMARTCANSPOT65 20W Battery Powered PAR LED Light User Manual

Most important : FIRST CHARGE THE FIXTURES FOR6-8 Hour son the First Charge before use. Plug in Power cord. Turn off Power Switch and Turnoff other switch to charge.

Introduction

Unpacking: Thank you for purchasing this product, all products has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton or damage that may have occurred during shipping. If the carton appears to be damaged, carefully in spectyour fixture for any damage and be sure all accessories necessary to operate the unit hasarrivedintact. In the case damage has been found or parts are missing, please contact themanufactureror your dealer for further instructions. Do not return this unit to your dealer without first contacting.

Introduction: this lighting is a DMX intelligent and battery powered LEDpar light. Thisparlightislight weight and compact which makes it a great piece for mobile DJ‟s and clubs

Warning! To prevent or reduce the risk of electrical shock or fire, do not exposethisunit torainor moisture

Caution! There are no user serviceable parts inside this unit. Do not attempt anyrepairsyourself; doing so will void your manufactures warranty. In the unlikely event your unit mayrequire service please contact the manufacturer or your deale

PLEASE recycle the shipping carton whenever possible

General Instructions

To optimize the performance of this product, please read these operating instructionscarefullytofamiliarize you with the basic operations of this unit. These instructions containimportant safetyinformation regarding the use and maintenance of this unit. Please keep this manual withtheunit,for future reference.

Features

• Power supply: AC110V-250V
• Frequency: 50-60Hz
• Power consumption: 20W
• Light source: 1pcs 20W high brightness 6 in 1 leds
• Lamp life: 6-10 ten thousand hrs
• LED angle: 65 degree
• Color: 16.7 million kinds of color change
• Control channels: 6/10 chs
• Control mode: DMX512, master/slave, auto, sound active
• Automatic model(by function button) : color change, color strobe, color dimmer, colorgradualchange/color jump change
• Operation menu: LCD display
• Packing size: 265140145mm
• N.W: 1.6kg
• G.W: 1.8kg

Safety Precautions

• To reduce the risk of electrical shock or fire, do not expose this unit to rain or moisture.
• Do not spill water or other liquids into or on to your unit.
• Be sure that the local power outlet match that of the required voltage for your unit.
• Do not attempt to operate this unit if the power cord has been frayed or broken. Donotattempt to remove or break off the ground prong from the electrical cord. This prongisusedtoreduce the risk of electrical shock and fire in case of an internal short.
• Disconnect from main power before making any type of connection.
• Do not remove the cover under any conditions. There are no user serviceablepartsinside
• Never operate this unit when it‟s cover is removed.
• Never plug this unit in to a dimmer pack.
• Always be sure to mount this unit in an area that will allow proper ventilation. Allowabout6”(15cm) between this device and a wall.
• Do not attempt to operate this unit, if it becomes damaged.
• This unit is intended for indoor use only; use of this product outdoors voids all warranties.
• During long periods of non-use, disconnect the unit‟s main power.
• Always mount this unit in safe and stable matter.
• Power-supply cords should be routed so that they are not likely to be walk donor pinchedbyitems placed upon or against them, paying particular attention to the point they exit fromunit.
• Cleaning -The fixture should be cleaned only as recommended by the manufacturer. See“Cleaning” for details.
• Heat -The appliance should be situated away from heat sources such as radiators, heatregisters, stoves, or other appliances (including amplifiers) that produce heat.
• The fixture should be serviced by qualified service personnel when:

A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the appliance.
C. The appliance has been exposed to rain or water.
D. The appliance does not appear to operate normally or exhibits a marked changeinperformance

• Fuse standard is 2A/250V
• Grounded using yellow/green line
• The ambient temperature must always be under +35° C

Set Up

Power Supply: Before plugging your unit in, be sure the source voltage in your areamatchesthe required voltage for your light is workable in 100-220V/50~60Hz. Becauselinevoltagemayvary from venue to venue, you should be sure your unit voltage matches the wall outlet voltagebefore attempting to operate you fixture.

Operating Instructions

Operating Modes: You can use this lighting in 5 ways:

• Sound activation – The unit will activated by the sound signal.
• Static display – The unit will display the color in static way.
• Auto Mode -The unit will automatically chase through the different patterns.
• DMX control mode -This function will allow you to control the lighting with astandardDMX512 controller.
• Battery powered – This function will allow you to control the lighting independentlywithoutany DMX cable

DMX Mode: Operating through a DMX controller give the user the freedomtocreatetheirownprograms tailored to their own individual needs. This function also allows youtouseyour fixtures as pattern changing lights.

1. This function will allow you to control each individual fixtures traits with a standardDMX512controller.
2. this lighting use 6/10 DMX channels to operate. Please see “DMX channel andFunctions”forthe DMX traits.
3. To run your fixture in DMX mode, plug in the fixture via the XLR connections toanystandardDMX controller. Set your desired DMX address following the setup specificationsthat comewithyour DMX controller.
4. The unit can automatically recognize the DMX signal once the DMX connectionisdone.

DMX Linking:
To ensure proper DMX data transmission, when using several DMX fixtures try tousetheshortest cable path possible. The order in which fixtures are connected in a DMXlinedoesnotinfluence the DMX addressing. For example; a fixture assigned a DMX addressof 1maybeplaced anywhere in a DMX line, at the beginning, at the end, or anywhere in themiddle. Whenafixture is assigned a DMX address of 1, the DMX controller knows to send DATAassignedtoaddress 1 to that unit, no matter where it is located in the DMX chain.

6CH Mode

| Value| Description
---|---|---
CH1| 0| No action
1-255| RED dimmer
CH2| 0| No action
1-255| GREEN dimmer
CH3| 0| No action
1-255| BLUE dimmer
CH4| 0| No action
1-255| Cyan dimmer
CH5| 0| No action
1-255| Lemon dimmer
CH6| 0| No action
1-255| Amber dimmer

10CH Mode

| Value| Description
---|---|---
CH1| 0| No action
1-255| RGBCLA dimmer
CH2| 0-4| No action
5-255| Strobe from slow to fast
CH3| 0| No function
1-255| Red dimmer
CH4| 0| No function
1-255| Green dimmer
CH5| 0| No function
1-255| Blue dimmer
CH6| 0| No function
1-255| Cyan dimmer
CH7| 0| No function
1-255| Lemon dimmer
CH8| 0| No function
1-255| Amber dimmer
**** CH9| 0-4| No function
5-80| Color macro

LCD Operation Menu

For Battery Function and Charge

The unit has the function of battery powered. The buttonfor batteryandcharge is set on the rear panel. It is showed as the followingpicture,andthe function is described as below.

Infrared function

Infrared Mode

Infrared (IR) mode alows the product to be controlled with an infrared remote controler. The IRC-6 can remotely st the product o various modes; adjust the color, speed and sensifivity; and set the strobe.
The Par is compatible with the included IRC-6. To enable use with the IRC-6, follow the instructions below

There are two buttons on the rear panel of the lighting. One is for power, and theother isforsignal.

• When use the fixture with DMX, not wireless, please switch the signal buttonfor “off”
• When use the wireless DMX, please switch the button for “on”
• When charge the light, please switch both of the button for “of”. At the sametime, if theswitchfor power is “on”, the light will be at work during the process of charge, but will consumesomepower from the charge; if the switch for power is “off”, the light will be blackout andnot beatwork

Tip for the battery and charge:

• The battery can last for 4-5 hours when all LEDs on after full charge , and canlast formorethan 6-8 hours on auto running mode. Up to 20 Hours with one color diode on. Resultswill varybased on brightness of LEDs
• It is suggested to charge the battery for at least 4 hours, which will extend thelifespanofthebattery.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>