sistema RETROB600L Floor Party Light User Manual

sistema RETROB600L Floor Party Light User Manual

Safety Notes

Note : To ensure reasonable consistency of operation, please read this instruction carefully. Any damages caused by the non-observance of this manual or any unauthorized modification to this product are not be subject to warranty .

1. This product belongs to high temperature products. Do not touch the lamp body when working, carefully scalds!
2. Maintain a 50CM space at the back of the lamp body for dissipate heat.
3. When installing/replacing the lamp tube, turn off the lamp power!
4. This lamp is used for indoor lighting, not waterproof ! When lamp works, lamp tube at high temperature.
5. Make sure the voltage and frequency of power supply match the power require of this devise.
6. Please do not operate the equipment in the condition of wire damage or wear.
7. Do not remove any part of the equipment during the use of lamps.
8. Any unauthorized modification to this product are not be subject to warranty.

Function Menu

Function Operation

Keys diagram

built-in program Automatic function

1. Select the working mode menu.
2. Select automatic mode.
3. Choose one of nine programs.
4. Setting program speed.

manual mode function

The manual mode function is consistent with the Pixel control 6CH channel but in manual mode DMX address is not working in that condition . The six submenus correspond to six functions.

Sound control function

1. Select the working mode menu.
2. Select automatic mode. Because sound control is based on the automatic program, so you need to choose the automatic program before you turn on the sound control .
3. Choose one of nine programs .
4. Select the working mode menu.
5. Select sound control mode.
6. Set the sound control sensitivity. From 0 to 100 sound control will more and more sensitive

Channel Function

1CH DMX general function

1. Select the working mode menu.
2. Select DMX mode.
3. Set to 1 channel mode.
4. Exit the working mode menu, select the DMX menu, and set the DMX menu address.

The DMX address can be set to 001.

6CH DMX general function

1. Select the working mode menu.
2. Select DMX mode.
3. Set to 6 channel mode.
4. Exit the working mode menu, select the DMX menu, and set the DMX menu address.

The DMX address can be set to 001.

Strobe

| 0| 3| No function
4| 7| Dimmer
8| 76| Synchronizing strobe;Strobe from slow to fast
77| 145| Pulse strobe ;Strobe from slow to fast
146| 215| Random strobe ;strobe from slow to fast
216| 255| Dimmer
3|

Auto run-1

| 0| 15| No function
16| 31| Program 1
32| 47| Program 2
48| 63| Program3
64| 79| Program4
80| 95| Program5
96| 111| Program6
112| 127| Program7
128| 143| Program8
144| 159| Program9
160| 175| Program10
176| 191| Program11
192| 207| Program12
208| 223| Program13
224| 239| Program14
240| 255| Program15
4|

Auto run-2

| 0| 15| No function
16| 31| Program 16
32| 47| Program 17
48| 63| Program18
64| 79| Program19
80| 95| Program20
96| 111| Program21
112| 127| Program22
128| 143| Program23
144| 159| Program24
160| 175| Program25
176| 191| Program26
192| 207| Program27
208| 223| Program28
224| 239| Program29
240| 255| Program30
5| Speed| 0| | No function
1| 255| Program speed from slow to fast
6| Sound| 0| | No function
1| 255| Sensitivity increases gradually

6PXCH DMX Pixel Control function

1. Select the working mode menu.
2. Select DMX mode.
3. Set to 6 channel mode.
4. Exit the working mode menu, select the DMX menu, and set the DMX menu address.

The DMX address can be set to 001

8CH DMX general function

1. Select the working mode menu.
2. Select DMX mode.
3. Set to 8 channel mode.
4. Exit the working mode menu, select the DMX menu, and set the DMX menu address.

The DMX address can be set to 001.

Product Dimension Drawing

As below:

Technical Parameter Diagram

Technical Parameter Diagram:

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>