EPOMAKER MINI CAT68 65 Degree Hot Swappable RGB Acrylic Keyboard Kit User Manual
- June 12, 2024
- EPOMAKER
Table of Contents
QUICK S T A R T GUIDE
EPOMAKER
MINI CAT68
65% Hot
Swappable RGB Acrylic Keyboard Kit
Should you require more assistance please email us
atsupport@epomaker.com
MINI CAT68 65 Degree Hot Swappable RGB Acrylic Keyboard Kit
SHORTCUTS
FN + 1| F1
FN + 2| F2
FN + 3| F3
FN + 4| F4
FN + 5| F5
FN + 6| F6
FN + 7| F7
FN + 8| F8
FN + 9| F9
FN + 0| F10
FN + –| F11
FN + =| F12
FN + Esc| `
LIGHT EFFECTS
Fn + || Turn On/Off Backlights
Fn + ]}| Toggle RGB Effects
Fn + P| Hue +
Fn + ;:| Hue –
Fn + [{| Sat +
F+’”| Sat –
Fn + ↓| Backlights Brightness –
Fn + ↑| Backlights Brightness +
Fn + ←| Backlights Speed –
Fn + →| Backlights Speed +
FUNCTION KEY COMBINATIONS
FN + Backspace
(Hold 3s)| Reset the Keyboard
Fn + A| Windows Mode
Fn + S| Mac Mode
HOW TO USE VIA:
- Please visit “ https://github.com/WestBerryVIA/via-releases/releases ” to download the latest VIA application for your computer’s OS. Turn on the button of “Use V2 definitions (deprecated)”
- Download Epomaker Mini Cat 68 json file via https://epomaker.com/blogs/qmk-via/epomaker-mini-cat-68-via-json and load the file.
- When the loading is completed, the “Configure” Tab displays the layout and programmable functions.
SPECS
| MODEL: | EPOMAKER Mini Cat 68 |
|---|---|
| KEYS AMOUNT: | 68 Keys |
| CASE MATERIAL: | Acrylic |
| STABILIZER TYPE: | Plate-mounted |
| PCB TYPE: | 3/5-pin Hotswap PCB |
| CONNECTIVITY: | Type-C Wired |
| ANTI-GHOST KEY: | NKRO |
| POLLING RATE: | 1000hz |
| COMPATIBILITY: | WINDOWS/MAC |
| DIMENSION: | 341×180 x38mm |
| WEIGHT: | Around0.8kg |
REPLA CIN G KEY C APS A N D S W I T C HES
For a full guide on how to remove keycaps and switches scan the QR Code or
type in your browser:
https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-
your-mechanical-keyboard-switches
Before installing switches, be sure the pins are clean and straight.
Push Straight Down
Please be gentle. Be sure the pins are aligned with the slots.
Included Tools
Remove Switches
- Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
- Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
Install Switches
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it’s properly attached to your keyboard, and test it.
Note: If the key doesn’t work its possible you may have bent one of the
switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not
done correctly. Never apply excessive force when replacing keycaps or
switches. If you cannot remove or install keycaps or switches please contact
customer service as soon as possible to avoid damage to the keyboard due to
operating errors.
TECHNICAL ASSISTANCE
For technical assistance, please email to
support@epomaker.com with your purchase
order number and a detailed description of your issue.
We normally respond to enquiries within 24 hours. If you purchased your
keyboard from a distributor or not from any official store of Epomaker, please
contact them directly for any additional help.
COMMUNITY FORUMS
Join our community and learn together with other keyboard enthusiasts.
https://discord.gg/2q3Z7C2
https://www.reddit.com/r/Epomaker/
WARRANTY
EPOMAKER’s Warranty covers any factory defects that might affect the proper
functionality of your purchase. It doesn’t cover any damage that may occur
from normal wear and tear.
If your product is defective we will send you a replacement unit. Replacement
units might require you to send the defective unit back to Epomaker.
We provide a 1 year warranty for our products when bought from our website
(EPOMAKER.com). Your item will not be covered by your 1
year warranty if the inspection shows any sign of modification or changes
unsupported by the original product, these include: Changing internal
components, Assembling and reassembling the product, Replacing Batteries, etc.
We will ONLY cover the item if it is bought from our official stores. You do
not have a warranty with us if you bought the item from another reseller or
likewise. Please contact the store that you bought your product from to
resolve issues.
https://epomaker.com/pages/software-downloads
Made in China
Manufacturer: Shenzhen Changyun Technology Co., Ltd.
Address: Seventh Floor, Kai Dear Building, No.168 Tongsha Road, Xili Street,
Nanshan Disctrict, Shenzhen, Guangdong, CN
Email: support@epomaker.com
Web: www.epomaker.com
APEX CE SPECIALISTS LIMITED
Unit 3d North Point House, North Point Business Park, New Mallow Road Cork,
T23 AT2P, Ireland
Contact: Wells Tel: +353212066339
APEX CE SPECIALISTS LIMITED
89 Princess Street, Mancheste, M1 4HT, UK
Contact: Wells
E-mail: info@apex-ce.com
Documents / Resources
|
EPOMAKER MINI CAT68 65 Degree Hot Swappable RGB Acrylic Keyboard
Kit
[pdf] User Manual
MINI CAT68 65 Degree Hot Swappable RGB Acrylic Keyboard Kit, MINI CAT68 65,
Degree Hot Swappable RGB Acrylic Keyboard Kit, Swappable RGB Acrylic Keyboard
Kit, RGB Acrylic Keyboard Kit, Keyboard Kit
---|---
References
- Epomaker
- EPOMAKER Mini Cat 68 VIA JSON File
- Epomaker
- Epomaker
- DIY Guide: How to Replace Your Mechanical Keyboard Switches
- Releases · WestBerryVIA/via-releases · GitHub
- Reddit - Dive into anything
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>