EPOMAKER Mechlands MC66 Gaming Keyboard User Manual

June 3, 2024
EPOMAKER

EPOMAKER Mechlands MC66 Gaming Keyboard User Manual

EPOMAKER Mechlands MC66 Gaming Keyboard.JPG

65% Hot Swappable RGB Tri-mode mechanical Gaming keyboard
This Quick Guide is an introduction to the use and functionality of the Mechlands MC66.
For in-depth guide of functionality of the customization software please refer to the manual that you can find in the official Mechlands website at www.mechlands.com

Should you require more assistance please email us at support@mechlands.com

FIG 1.JPG

FIG 2 Scan QR code

Made in China
Manufacturer: Shenzhen Yiyu Technology Co., Ltd.
Address: Seventh Floor, Cadregroup Building,No.168 Tongsha Road,
Xili Street, Nanshan District, Shenzhen, Guangdong, CN
E-mail: support@mechlands.com
Web: www.mechlands.com

FIG 3.JPG

FIG 4.JPG

FIG 5 Keyboard Shotcut.JPG

FIG 6 Keyboard Shotcut

FIG 7 Keyboard Shotcut.JPG

PAIRING BLUETOOTH:
FN+W/E/R Long Press for 3 seconds to pair Bluetooth device
FN+W/E/R Short Press to switch to last paired device

Long press the FN+W/E/R for 3 seconds, the keyboard will start pairing and the
blue/purple/green light of the channel 1 / 2/3 will flash quickly.

Short press FN+W/E/R to switch to the bluetooth channel 1/2/3.When switching,the
blue/purple/green light of the channel 1/2/3 flash slowly

The blue/purple/green light will be always on after the connection is successful if it
has never been paired, the blue/purple/green LED will flash slowly for 1 minute and
then keyboard enters the sleep state

PAIRING WIRELESS 2.4GHz:
FN+T Switch to Wireless Mode
Short press FN+T to switch to 2.4G mode. When switching, the red light of the mode
switching indicator flashes slowly

CHARGE
Low power: LED flashes red (When the battery voltage is lower than about 3.3V)
Charging: Blue light is always on
Fully charged: Green light is always on

KEYBOARD SLEEPING MODE:
When the keyboard is connected to the USB port, whether in Bluetooth mode or 2.4G mode, the keyboard will not go to sleep mode.

When the keyboard is on Bluetooth mode or 2.4G mode, after the keyboard is left to stand for 300 seconds, the keyboard enters level 1 sleep, the backlight is turned off, press any key to restart the backlight. Then after the keyboard continues to stand for more than 30 minutes, the keyboard enters level 2 sleep. Press any key to connect back the keyboard.

FIG 8.JPG

REPLACING KEYCAPS AND SWITCHES
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser: https://epomaker.com/blogs/guides/diy-guide-how-to- remove-and-replace-your-mechanical-keyboard-switches

FIG 9.JPG

FIG 10.JPG

Note: If the key doesn’t work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.

Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing

keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.

TECHNICAL ASSISTANCE
For technical assistance, please email to WWW.MECHLANDS.COM with your purchase order number and a detailed description of your issue.

We normally respond to enquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store of MechLands, please contact them directly for any additional help.

WARRANTY
MECHLANDS’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to MechLands.

We provide a 1 year warranty for our products when bought from our website (MECHLANDS.com). Your item will not be covered by your 1 year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc.

We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.

Read More About This Manual & Download PDF:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals