EPOMAKER TH96 QMK 95 Percent Hot Swappable RGB Mechanical Gaming Keyboard User Guide

EPOMAKER TH96 QMK 95 Percent Hot Swappable RGB Mechanical Gaming Keyboard

GENERAL FUNCTION

• FN + F1: Screen Brightness
• FN + F7: Previous Track
• FN + F9: Next Track
• FN + F11: Volume –
• FN+WIN: Lock/Unlock Win Key
• SIDE SWITCH: Left: Layer W; Right: Layer M
• FN + F2: Screen Brightness+
• FN + F8: Play/Pause
• FN + F10: Mute
• FN + F12: Volume+
• FN+/ OR ÷ (Win OS only): Numlock

LIGHT EFFECTS

• FN + ESC: Turn On/Off Backlights
• FN + ↓: Backlights Brightness-
• FN + ←: Backlights Speed-
• FN + P: Toggle RGB Effects
• FN + ↑: Backlights Brightness˜
• FN + →: Backlights Speed+

FUNCTION ON LAYER W

• FN+F3: Task
• FN+F6: Desktop
• FN + KNOB ROTATE RIGHT: Screen Brightness +
• FN+F5: Browser
• FN + KNOB ROTATE LEFT: Screen Brightness-

FUNCTION ON LAYER M

• FN + KNOB ROTATE LEFT: Screen Brightness-

Note: The listed functions are factory settings. The functions are fully programmable by QMK & VIA.

SPECIFICATIONS

plate-mounted stabilizers

PCB TYPE| 3/5-pin Hotswap PCB
QMK/VIA| Support
ANTI-GHOST KEY| NKRO
POLLING RATE| 1000hz
LED| South-facing LEDs
COMPATIBILITY| windows/mac
DIMENSION| 388 x 138x 38 mm
WEIGHT| Around 1.2kg

W/M INDICATOR LIGHT

• Off: Layer W; All functions will be in accord with the layer W
• On: Layer M; All functions will be in accord with the layer M

MIDDLE INDICATOR LIGH T
Windows OS

• Off: Numpad off;
• On: Numpad on

Mac OS
The light keeps off while the numpad keeps on

REPLACING KEYCAPS AND SWITCHES

For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser: https://epomaker.com/blogs/guides/diy-guide-how-to- remove-and-replace-your-mechanical-keyboard-switches

Remove Switches

1. Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
2. Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
3. Using firm but gentle force pull the switch away from the keyboard using a vertical motion.

Install Switches

1. Check that all the switch metallic pins are perfectly straight and clean.
2. Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
3. Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
4. Inspect the switch to ensure it’s properly attached to your keyboard, and test it.

Note: If the key doesn’t work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.

TECHNICAL ASSISTANCE

For technical assistance, please email to [email protected] with your purchase order number and a detailed description of your issue. We normally respond to enquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store of Epomaker, please contact them directly for any additional help.

COMMUN I T Y FORUMS
Join our community and learn together with other keyboard enthusiasts.

• https://discord.gg/2q3Z7C2
• https://www.reddit.com/r/epomaker

WARRANTY

EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker. We provide a 1 year warranty for our products when bought from our website (EPOMAKER.com). Your item will not be covered by your 1 year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc. We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.

References

• ce.com
• Epomaker
• Epomaker
• Epomaker
• DIY Guide: How to Replace Your Mechanical Keyboard Switches
• Software
• Reddit - Dive into anything

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>