EPOMAKER RT100 Mechanical Keyboard User Guide
- October 30, 2023
- EPOMAKER
Table of Contents
EPOMAKER RT100 Mechanical Keyboard User Guide
98 Key Hot Swappable Wired Wireless Mechanical Keyboard
This Quick Guide is an introduction to the use and functions of EPOMAKER RTl00 For in-depth guidance on customizing software functions, please refer to the manual in EPOMAKER RTl00.
MODEL: EPOMAKER RTlOO WEIGHT: 1350g
SIZE: 397 x 147 x 29.5±1 mm HOTSWAP: YES
NKRO: YES KEYCAPS: PBT
SYSTEM: Windciws XP/VISTA/7/ 8/10,Mac LAYOUT: 97keys
CONNECTION: USB-C, 2.4GHz Bluetooth 3.0, Bluetooth 5.0.
Made in China
Manufacturer: Shenzhen Changyun Technology Co., Ltd. Address: Seventh
Floor, Kai Daer Building, No.168 Tongsha Road, Xiii Street, Nanshan Disctrict,
Shenzhen,Guangdong, CN
Email: support@epomaker.com
Web:
www.epomaker.com.
APEXCE SPECIALISTS LIMITED
Unit 3d North Point House, North Point Business Park, New Mallow Road Cork,
T23 AT2P, Ireland
Contact: Wells
Tell: +353212066339
APEX CE SPECIALISTS LIMITED
89 Princess Street, Mancheste, M1 4HT, UK
Contact: Wells
Email: info@apex-ce.com.
WIRED OR WIRELESS
Use the connection mode switch on the top of the keyboard. OFF means to turn off the power supply. At this time, inserting the cable can realize Wired connection mode and timely charging. ON means to turn on the power and enter the wireless working mode.
PAIRING BLUETOOTH
FN • 0/WtE Long Press for 3 seconds to pair Bluetooth device
FN • 0/WtE Short Press to switch to last paired device
Turn the keyboard power switch to ON to enable wireless connection mode.
Long press FN+Q/W/E to start pairing. When pairing, the indicator light
flashes quickly. After pairing is successful, the indicator light stays on for
a long time, followed by the
Main backlight. If pairing fails within 30 seconds, the indicator light goes
out and the Keyboard enters the sleep mode.
2.4G PAIRING MODE
Switch to 2.4G wireless connection mode FN+R.
Urn the keyboard power switch to ON, turn on the wireless connection mode, and
long Press FN+R to turn on the 2.4G pairing mode. The indicator light will
flash quickly, and Insert the receiver to start pairing. After the pairing is
successful, the prompt light will Stay on and follow the light effect of the
primary key area. If pairing fails within 30 seconds, The indicator light goes
out and the keyboard enters the sleep mode.
PAIRING WIRED MODE
urn the keyboard power switch to OFF to enter the wired connection mode, and
use a USB-C wire to connect the keyboard to your device.
MODE SWITCHING
If you need to switch the system or change the connection device of the
keyboard, please Adjust the top mode switch of the keyboard to the operating
system corresponding to the Computer. The left side is Mac mode, and the right
side is Win mode. Otherwise, some shortcut Keys may not work properly.
KEYYBOA RD WAKE UP/SLEEP
After the keyboard enters the sleep mode, press any key to wake the keyboard.
If you are in Bluetooth/2.4G mode, the keyboard will automatically connect to
a Bluetooth/2.4g device.
Options
HOT PLUG SMART SCREEN: 1.33inches
CONNECTION MODE: Type-c
DISPLAY CONTENT: time/date/week/power/current connection
model/volume/weather temperature/
CPU power consumption/health reminder.
DISPLAY PICTURE: You can choose to change the display picture through the driver. It supports the use of the driver’s own drawing board module to make a GIF dynamic background image.
Read More About This Manual & Download PDF:
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>