EPOMAKER BRICK 87 Versatile TKL Keyboard User Guide
- June 1, 2024
- EPOMAKER
Table of Contents
EPOMAKER BRICK 87 Versatile TKL Keyboard
Buttons Functions
WINDOWS SHORTCUT
Keyboard Identify OS automatically when connected.
FN +F1 | Screen Brightness – |
---|---|
FN+F2 | Screen Brightness+ |
FN+F3 | Task |
FN+F4 | Explorer |
FN+F5 | |
FN+F6 | My Computer |
FN+F7 | Previous Track |
FN+F8 | Play/Pause |
FN+F9 | Next Track |
FN + F10 | Mute |
FN + F11 | Volume- |
FN + F12 | Volume+ |
- FN+WIN: Lock/Unlock Win Key
- (Win indicator in White on the right)
MAC SHORTCUT
F1 | Screen Brightness – |
---|---|
F2 | Screen Brightness + |
F3 | Mission Control |
F4 | Search |
F5 | Mic |
F6 | Sleep |
F7 | Previous Track |
F8 | Play/Pause |
F9 | Next Track |
F10 | Mute |
F11 | Volume- |
F12 | Volume+ |
- IN MAC MOD E, FN+F1■F1, FN+F2■F2, … , FN+F12■F12
FUNCTION KEY COMBINATIONS
LIGHT EFFECTS
PAIRING
PAIRING BLUETOOTH
Toggle the switch on the right side of the keyboard to make sure that the keyboard is under the Bluetooth mode:
- Hold Fn+1!/2@/3# for 3-5 seconds till the indicator flashes fast, the keyboard is ready to pair.
- Turn on your Bluetooth device and find the keyboard, then connect. When the keyboard is connected to the Bluetooth device, the light on the 1!/2@/3# key stops flashing and the connection is done.
- Press Fn+1!/2@/3# to toggle between the Bluetooth devices 1/2/3.
PAIRING WIRELESS 2.4GHZ
Toggle the switch on the right side of the keyboard to make sure that the keyboard is under the 2.4G mode:
- Hold Fn+4$ for for 3-5 seconds till the light flashes fast in green, the keyboard is ready to pair.
- Insert the 2.4G dongle to your device, when the 4$ key stops flashing green, the connection is done.
Note
- The keyboard will enter sleep mode after 2 minutes of inactivity, the keyboard lights go off, and it can be reactivated by any keypress.
WIRED MODE
- Toggle the switch on the right side of the keyboard to switch to the wired mode. The 5% key stays white for 2s and goes off.
CHECK BATTERY
Hold Fn+B, the keys from 1! to 0) lights up to show the battery percentage; for example, if the keys from 1! to 6^ light up when holding Fn+B, it means that the battery life is currently 60%; if keys of 1!-0) light up, battery life is 100%.
Note
- When the keyboard is at low battery, the right indicator flashed red; when the keyboard is charging, the light stays green for 5s and goes off.
CHECK LAYER AND MODE
Hold Fn+Spacebar, the indicators of Z/X/C and 1/2/3/4/5 light up to show at which layer and which mode the keyboard is; for example, if the keys of X and 3 light up when holding Fn+Spacebar, it means that the keyboard is in layer 2 and under the wireless mode and connected to BT device.
SPECS
REPLACING KEYCAPS AND SWITCHES
- For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser: https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your-mechanical-keyboard-switches
Push Straight Down
- Please be gentle. Be sure the pins are aligned with the slots.
- Before installing switches, be sure the pins are clean and straight.
Included Tools
Mechanical Switch
Remove Switches
- Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
- Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
- Using firm but gentle force pull the switch away from the keyboard using a vertical motion.
Install Switches
- Check that all the switch metallic pins are perfectly straight and clean.
- Align the with Trichy to have fine alerted training harth Than. pins should align themselves to the keyboard PBC.
- Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
- Inspect the switch to ensure it’s properly attached to your keyboard. and test it.
Note: If the key doesn’t work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.
TECHNICAL ASSISTANCE
For technical assistance, please email to
support@epomaker.com with your purchase order
number and a detailed description of your issue.
We normally respond to enquiries within 24 hours. If you purchased your
keyboard from a distributor or not from any official store of Epomaker, please
contact them directly for any additional help.
COMMUNITY FORUMS
Join our community and learn together with other keyboard enthusiasts.
WARRANTY
EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker.
We provide a 1 year warranty for our products when bought from our website (EPOMAKER.com). Your item will not be covered by your 1 year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc. We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.
Contacts
TKL Triple-modeRGB Mechanical Keyboard with Stackable Brick Base
- Should you require more assistance please email us at support@epomaker.com
- Manufacturer: Shenzhen Changyun Technology Co., Ltd.
- Address: Seventh Floor, Kai Daer Building, No.168 Tongsha Road, Xili Street, Nanshan Disctrict, Shenzhen,Guangdong, CN
- Email: support@epomaker.com
- Web: www.epomaker.com
EC/REP: APEX CE SPECIALISTS LIMITED
- Unit 3d North Point House, North Point Business Park, New Mallow Road Cork, T23 AT2P, Ireland
- Contact: Wells
- Tel: +353212066339
UK/REP: APEX CE SPECIALISTS LIMITED
- 89 Princess Street, Mancheste, M1 4HT, UK
- Contact: Wells
- E-mail: info@apex-ce.com
Scan
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>