EPOMAKER TH96 Keyboard User Guide: Quick Start Instructions & Shortcuts

The EPOMAKER TH96 Keyboard User Guide provides quick start instructions and shortcuts for the 95% hot-swappable RGB mechanical gaming keyboard with an ISO layout. The guide includes Windows and MacOS shortcuts, light effects, function key combinations, and specifications. Users can also find information on how to replace keycaps and switches, technical assistance, community forums, and warranty details. The guide emphasizes that users can contact support@epomaker.com for more assistance. Additionally, it warns users to avoid operating errors when replacing keycaps or switches as it may cause damage to the keyboard, and advises users to contact customer service as soon as possible if they cannot remove or install keycaps or switches. The guide also highlights that the EPOMAKER TH96 Keyboard is manufactured by Shenzhen Changyun Technology Co., Ltd., and provides contact details for Apex CE Specialists Limited in Ireland and the UK.

QUICK START GUIDE
EPOMAKER TH96 ISO Layout
95% Hot Swappable RGB Mechanical Gaming Keyboard
Should you require more assistance please email us at support@epomaker.com

TH96 Keyboard

WINDOWS SHORTCUTS

MACOS SHORTCUTS

LIGHT EFFECTS

FUNCTION KEY COMBINATIONS

Long Press to Pair Devices
Fn + 2@| Short Press to Switch to BT2;
Long Press to Pair Devices
Fn + 3#| Short Press to Switch to BT3;
Long Press to Pair Devices
Fn + 4$| Short Press to Switch to 2.4G Mode;
Long Press to Pair Devices
Fn + 5%| Wired Mode
FN+ B| Battery Check
Fn + /| Numlock
Fn+Z/X/C| Switch among the Layers 1/2/3
Fn+Spacebar (Hold)| Check Layer & Mode

PAIRING BLUETOOTH (TRIPLE-MODE VERSION ONLY)

Toggle the switch in the back to make sure that the keyboard is under the wireless mode:

1. Hold Fn+1!/2@/3# (or 1!/2”/3£ in ISO layout) for 3-5 seconds till the indicators flashes fast in blue, the keyboard is ready to pair.
2. Turn on your Bluetooth device and find “TH96 BT5.0” or “TH96 BT3.0”, then connect. When the keyboard is connected to the Bluetooth device, the light on the 1!/2@/3# (or 1!/2”/3£ in ISO layout) key stops flashing and the connection is done.
3. Press Fn+1!/2@/3# (or 1!/2”/3£ in ISO layout) to toggle between the Bluetooth devices 1/2/3.

PAIRING WIRELESS 2.4GHZ (TRIPLE-MODE VERSION ONLY)

Toggle the switch in the back to make sure that the keyboard is under the wireless mode:

1. Hold Fn+4$ for for 3-5 seconds till the light flashes fast in green, the keyboard is ready to pair.
2. Insert the 2.4G dongle to your device, the 4$ key stops flashing green and the connection is done.

WIRED MODE

Toggle the switch to the wired mode, press Fn+5% till the 5% key lights up in white, and the keyboard enters to the wired mode successfully.

CHECK BATTERY (TRIPLE-MODE VERSION ONLY)

Hold Fn+B, the keys from 1! to 0) lights up to show the battery percentage; for example, if the keys from 1! to 6^ light up when holding Fn+B, it means that the battery life is currently 60%; if keys of 1!-0) light up, battery life is 100%.

CHECK LAYER AND MODE

Hold Fn+Spacebar, the indicators of Z/X/C and 1/2/3/4/5 light up to show at which layer and which mode the keyboard is; for example, if the keys of X and 3 light up when holding Fn+Spacebar, it means that the keyboard is in layer 2 and under the wireless mode and connected to BT3 device.

SPECS

mounted stabilizers
PCB TYPE:| 3/5-pin Hotswap PCB
BATTERY CAPACITY:| 6000mAh (Triple-mode version only)
CONNECTIVITY:| Type-C Wired, 2.4 & Bluetooth Wireless (Triple-mode version only)
QMK/VIA:| Supportable in the Wired version
ANTI-GHOST KEY:| NKRO in all modes
POLLING RATE:| 1000hz in Type-C Wired & 2.4G modes
LED:| South-facing LEDs
COMPATIBILITY:| WINDOWS/MAC
DIMENSION:| 323×113 x25mm
WEIGHT:| Around 0.8kg

REPLACING KEYCAPS ANDSWITCHES
For a full guide on how to remove keycaps and switches scan the QR Code or type in your browser:
https://epomaker.com/blogs/guides/diy-guide-how-to-remove-and-replace-your- mechanical-keyboard-switches

Remove Switches

1. Grab your Switch Removal Tool and align the gripping teeth vertically (on the Y-Axis) at the center of the switch, as shown in the example graphic above.
2. Grab the switch with the Switch Puller and apply pressure until the switch releases itself from the plate.
3. Using firm but gentle force pull the switch away from the keyboard using a vertical motion.

Install Switches

1. Check that all the switch metallic pins are perfectly straight and clean.
2. Align the switch vertically to have the Gateron logo facing north. The pins should align themselves to the keyboard PBC.
3. Press the switch down until you hear a click. This means your switch clips have attached themselves to the keyboard plate.
4. Inspect the switch to ensure it’s properly attached to your keyboard, and test it.

Note: If the key doesn’t work its possible you may have bent one of the switches while installing it. Pull the switch out and repeat the process.
Pins may be damaged beyond repair and need replacement if this process is not done correctly. Never apply excessive force when replacing keycaps or switches. If you cannot remove or install keycaps or switches please contact customer service as soon as possible to avoid damage to the keyboard due to operating errors.

TECHNICAL ASSISTANCE

For technical assistance, please email to support@epomaker.com with your purchase order number and a detailed description of your issue.
We normally respond to enquiries within 24 hours. If you purchased your keyboard from a distributor or not from any official store of Epomaker, please contact them directly for any additional help.

COMMUNITY FORUMS
Join our community and learn together with other keyboard enthusiasts.

https://discord.gg/2q3Z7C2
https://www.reddit.com/r/Epomaker/

WARRANTY

EPOMAKER’s Warranty covers any factory defects that might affect the proper functionality of your purchase. It doesn’t cover any damage that may occur from normal wear and tear. If your product is defective we will send you a replacement unit. Replacement units might require you to send the defective unit back to Epomaker.
We provide a 1 year warranty for our products when bought from our website (EPOMAKER.com). Your item will not be covered by your 1 year warranty if the inspection shows any sign of modification or changes unsupported by the original product, these include: Changing internal components, Assembling and reassembling the product, Replacing Batteries, etc.
We will ONLY cover the item if it is bought from our official stores. You do not have a warranty with us if you bought the item from another reseller or likewise. Please contact the store that you bought your product from to resolve issues.

Made in China
Manufacturer: Shenzhen Changyun Technology Co., Ltd.
Address: Seventh Floor, Kai Daer Building, No.168 Tongsha Road,
Xili Street, Nanshan Disctrict, Shenzhen,Guangdong, CN
Email: support@epomaker.com
Web: www.epomaker.com APEX CE SPECIALISTS LIMITED
Unit 3d North Point House, North Point Business Park, New Mallow Road Cork, T23 AT2P, Ireland
Contact: Wells
Tel: +353212066339 APEX CE SPECIALISTS LIMITED
89 Princess Street, Mancheste, M1 4HT, UK
Contact: Wells
E-mail: info@apex-ce.com

References

• Epomaker
• Epomaker
• DIY Guide: How to Replace Your Mechanical Keyboard Switches
• Reddit - Dive into anything

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>