CP electronics EBR-DIN-DALIG64 DIN Rail DALI Lighting Control Module User Guide

: June 12, 2024
: CP electronics

Table of Contents

Overview
Features
System wiring example
DALI bus loading
Technical data
Part numbers
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CP electronics EBR-DIN-DALIG64 DIN Rail DALI Lighting Control Module User Guide

CP electronics EBR-DIN-DALIG64 DIN Rail DALI Lighting Control Module User
Guide

Overview

The EBR-DIN-DALIG64 is a Rapid lighting control module designed for controlling 64 addressable DALI devices such as fluorescent or LED lighting ballasts. There are two relays providing a switched live output and a third relay for emergency test. Additionally there is a volt free contact to control external devices. This LCM also has a total of 8 switch inputs and 2 DALI connections. Used in conjunction with our range of DALI presence detectors a single DALI cable can be run to digitally control all the lighting and power the sensors. This saves time and money on additional specialist cable. It is ideal for chilled beam, continuous run lighting, and core areas.
Please speak to our technical team for further information.

CP electronics EBR-DIN-DALIG64 DIN Rail DALI Lighting Control Module User
Guide - Overview

Features

Front features

CP electronics EBR-DIN-DALIG64 DIN Rail DALI Lighting Control Module User
Guide - Front features

Mains connections

Live, Earth, Neutral.
SELV switch inputs
8 SELV switch inputs.
Volt free outputs
3 x normally open 10A 230VAC rated Voltage free relays. Used to switch external peripherals, such as HVAC and BMS systems.
1 x normally closed 6A 230VAC rated Voltage free relay. Suitable for emergency testing.
Communication ports
1 x power and Rapid network bus port
1 x DALI port

Removable Terminals (plug & socket) Hardware build 1.4 or later versions are upgraded with removeable terminals throughout for easy wiring or product replacement onsite.

Removable memory feature Hardware build 1.4 or later versions are upgraded with the removable memory feature that allows settings to be easily transferred to a replacement unit without re-programming.

System wiring example

CP electronics EBR-DIN-DALIG64 DIN Rail DALI Lighting Control Module User
Guide - System wiring example

DALI bus loading

Devices (detectors / input units) and ballast combinations for 200mA supply. This assumes that the sensor LEDs are all on, and the sensor is receiving IR communicant.

4 devices and up to 64 ballasts
5 devices and up to 55 ballasts
6 devices and up to 44 ballasts
7 devices and up to 33 ballasts
8 devices and up to 22 ballasts
9 devices and up to 12 ballasts
10 devices and up to 2 ballasts
In most realistic scenarios, only one LED is on at a time and only one detector is receiving IR; guidance changes to.
10 devices up to 64 ballasts
11 devices up to 60 ballasts
12 devices up to 55 ballasts
13 devices up to 50 ballasts
14 devices up to 48 ballasts
15 devices up to 44 ballasts
Addressing limits of DG64
5 input units of 7 channels each
10 detectors

Technical data

Dimensions See diagrams opposite
Weight 0.40kg
Supply Voltage 220 – 240VAC
Frequency 50Hz
Relay rating Normally open relays 10A
Normally closed relay 6A
Volt free output 10A
Terminal Capacity 2.5mm2
Power consumption On 2930mW, Off 2120mW
DALI Voltage 16VDC via DALI
DALI Output Current 250mA (maximum)
DALI bus Cannot be considered as SELV since DALI, ballasts only offer basic insulation, therefore all devices on the DALI bus must be
wired as if carrying mains potential.
Temperature -10ºC to 35ºC
Humidity 5 to 95% non-condensing
Material (casing) Flame retardant ABS and PC/ABS
Classifications Insulation Class II
Purpose Operating control
Construction Incorporated control
Type of action Type 1.B action
micro disconnection
Software class Class A
Pollution Degree 2