CP Electronics MWS3A-DBB Surface Mount Back Box Installation Guide
- June 12, 2024
- CP electronics
Table of Contents
CP Electronics MWS3A-DBB Surface Mount Back Box
Product Information
-
Product Name: MWS3A-DBB
-
Model Number: WD987 Issue 4
-
Installation Guide: cpelectronics.co.uk/cp/987.
-
Languages: English, Portuguese, Italian, Russian, Dutch
-
Warning: This device should be installed by a qualified electrician in accordance with the latest edition of the IEE wiring regulations.
Product Usage Instructions ****
- Surface Fixing: Use the optional surface mounting box MWS3A-DBB to surface fix the MWS3a.
- Ceiling Hole: Cut a 30mm diameter hole in the ceiling for the wires and mounting holes using the provided template.
- Secure to Ceiling: Secure the mounting box to the ceiling using the cut holes.
- Wire Connection: Wire in plug/s according to the wiring diagram on page 2 of the MWS3a installation guide. Pass the wires through the mounting box and connect the plug/s to the detector.
- Spring Attachment: Bend the springs up and insert the device. The springs will snap back to hold the device in place. Take care when bending springs to avoid injury.
Please refer to the installation guide for detailed instructions and diagrams specific to your language.
Dimensions
Installation
Surface fixing the MWS3a, using the optional surface mounting box MWS3A-DBB.
Create cut out
Cut a 30mm diameter hole in the ceiling for the wires, and mounting holes
using the template shown.
Secure to ceiling
Secure the mounting box to the ceiling using the holes cut.
Wire in plugs & connect to detector
Wire in plug/s, using wiring diagram on page 2 of the MWS3a installation
guide. Pass the wires through the mounting box and connect the plug/s to the
detector.
Install detector
Bend the springs up and push detector into the mounting box. When fully
inserted the springs snap back to hold the device in place.
To avoid injury, take care when bending springs.
Secure detector to mounting box
Secure detector with the supplied screw into the side of the mounting box
.
Downloads and Videos
CONTACT
- CP Electronics
- Brent Crescent, London NW10 7XR
- t. +44 (0)333 900 0671
- enquiry@cpelectronics.co.uk.
- www.cpelectronics.co.uk.
- connect with us:
Due to our policy of continual product improvement CP Electronics reserves the right to alter the specification of this product without prior notice. WD987 Issue 4 Installation Guide, MWS3A-DBB Surface mount back box for MWS3A range WD987 Issue 4 Installation Guide MWS3A-DBB