nVent LENTON LK420 Measuring Pitcher Owner’s Manual
- June 16, 2024
- nVent LENTON
Table of Contents
nVent LENTON LK420 Measuring Pitcher
Product Information
Specifications
- Catalog Number: LK420
- Material: Polypropylene
- Volume: 0.8 gal (US)
- Unit Weight: 0.45 lb
Features
- Graduated pitcher allows for small, measurable water additions
- Sized specifically for one full bag of nVent LENTON grout (HY10L)
- Durable and reusable
Additional Product Details
Prior to installation, please read and understand the detailed instructions
and safety notices provided in the nVent LENTON Interlok Instruction Manual.
Warning
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Improper installation,
misuse, misapplication, or other failure to completely follow nVent’s
instructions and warnings may cause product malfunction, property damage,
serious bodily injury, and death and/or void your warranty.
Contact Information
- Europe Netherlands: +31 800-0200135
- France: +33 800 901 793
- Europe Germany: 800 1890272
- Other Countries: +31 13 5835404
- APAC Shanghai: +86 21 2412 1618/19
- Sydney: +61 2 9751 8500
- Brands
Our powerful portfolio of brands:
- nVent.com
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
Disclaimer
All trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.
Product Usage Instructions
Step 1: Prepare the Measuring Pitcher
Ensure the measuring pitcher is clean and dry before use.
Step 2: Fill the Measuring Pitcher
Pour water into the measuring pitcher up to the desired measurement mark. The
graduated markings on the pitcher allow for accurate measurement of water
additions.
Step 3: Add Water to nVent LENTON Grout (HY10L)
Slowly pour the measured water from the measuring pitcher into the nVent
LENTON grout (HY10L) mixture. Follow the instructions provided in the nVent
LENTON Interlok Instruction Manual for proper mixing and application.
Step 4 : Clean and Store the Measuring Pitcher
After use, clean the measuring pitcher with warm soapy water and rinse
thoroughly. Dry the pitcher before storing it in a clean and dry location for
future use.
Step 5: Safety Precautions
Always follow the safety precautions and guidelines provided in the nVent
LENTON Interlok Instruction Manual to ensure safe handling and usage of the
grout and measuring pitcher.
Frequently Asked Questions (FAQ)
Q: Can the measuring pitcher be used with other grout products?
A: The measuring pitcher is specifically sized for one full bag of nVent
LENTON grout (HY10L). It is recommended to use it with the specified grout
product for accurate measurements.
Q: Is the measuring pitcher microwave-safe?
A: The measuring pitcher is made of polypropylene material, which is not
suitable for use in microwaves. Do not expose the pitcher to high
temperatures.
Q: Can the measuring pitcher be used with hot liquids?
A: It is recommended to use the measuring pitcher with cold or room
temperature liquids. Avoid pouring hot liquids into the pitcher to prevent
potential damage.
Used to accurately measure water additions to the nVent LENTON grout (HY10L)
FEATURES
Graduated pitcher allows for small, measurable water additions
Sized specifically for one full bag of nVent LENTON grout (HY10L)
Durable and reusable
SPECIFICATIONS
Table 1/1
Catalog Number| Material| Volume| Unit Weight
LK420| Polypropylene| 0.8 gal (US)|
0.45 lb
ADDITIONAL PRODUCT DETAILS
Prior to installation, please read and understand the detailed instructions and safety notices provided in the nVent LENTON Interlok Instruction Manual.
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and from your nVent customer
service representative. Improper installation,misuse, misapplication or other
failure to completely follow nVent’s instructions and warnings may cause
product malfunction,property damage, serious bodily injury and death and/or
void your warranty
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793
Europe
Germany:
800 1890272
Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500
Our powerful portfolio of brands:
nVent.com
CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.