MAPerformance WRX-5G-CB Catback Exhaust Installation Guide
- June 12, 2024
- MAPerformance
Table of Contents
MAP WRX-5G-CB
Install Instructions
What’s in the box :
1x MAP 2022 WRX Front Pipe
1x MAP 2022 WRX Mid Pipe
2x MAP 2022 WRX Axlebacks
2x 3.5” Dual Exhaust Tips (options available)
1x 3” V-Band Clamp
2x 2.5” V-Band Clamp
1x Anti-seize Packet
Tools needed
You will need :
3/8ths ratchet
12mm socket
13mm socket
14mm socket
Step 1
Remove front pipe spring bolts (14mm)
Step 2
Remove both side muffler bolts X4 (14mm)
Step 3
Remove front pipe from exhaust hanger
Step 4 
Remove both mufflers from their 2 hangers
Step 5
Install MAP catback midpipe, securing to the
factory turbo back exhaust with included bolts
Step 5.1
If installing in conjunction with a factory downpipe, use optional exhaust
flange adapter
Step 6
Connect the front pipe to the Y pipe and
LOOSELY secure with included vband. Use anti seize
Step 7
Install both mufflers to their respective hangers and secure with vband
loosely. Use anti seize
Step 8
Install included MAP tips and clamps onto mufflers. Adjust to desired fitment
and tighten clamps with hand tools. Besure to place clamps at the end of the
tips to ensure proper clamping force.
Use anti seize on threads
Step 9
Adjust Y pipe and muffler connections to dial in tip fitment within the bumper
shroud, tighten from midpipe working backwards until all vbands are tight
We hope you enjoy your purchase! Reach out to us with any issues or
concerns.
1-888-627-3736
@maperformance
support@maperformance.com
www.facebook.com/modernautomotiveperformance/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>