MAPerformance MAP INFQ-RMD-P Axle-Back Exhaust Instruction Manual
- June 4, 2024
- MAPerformance
Table of Contents
MAPerformance MAP INFQ-RMD-P Axle-Back Exhaust
What’s in the box?
- 2x Muffler Delete Pipes
- 2x Axle-Back Gaskets
- 2x Bolt-On Tips
- 4x M10 Flange Nuts
Tools needed
You will need:
- 3/8ths ratchet
- 3/8ths 12mm socket
- 3/8ths 14mm socket
INSTALLATION
Step 1
Remove 6 12mm bolts holding exhaust hanger to the vehicle
Step 2
Remove 4 14mm nuts securing the factory muffler to the factory exhaust
Step 3
Remove factory muffler
Step 4
Remove exhaust hangers from the factory muffler and reinstall onto the vehicle
Step 5
Install new included gaskets onto factory exhaust, then slide MAP Q60 Rear Muffler deletes into place
Step 5.1
Install new included gaskets onto factory exhaust, then slide MAP Q60 Rear Muffler deletes into place
Step 6
Secure to factory exhaust with included hardware and tighten to 35 FTLBS
(We include extra bolts incase your factory studs become stripped, if your studs are in good working order these will not be used)
Step 7
Install included tips and secure with included clamps. Be sure to use a dab of anti seize on the clamp threads to prevent galling
We hope you enjoy your purchase! Reach out to us with any issues or concerns.
support@maperformance.com www.facebook.com/modernautomo-tiveperformance/