CUR AQUA 009475 Toilet Seat Instruction Manual

CUR AQUA 009475 Toilet Seat

SAFETY INSTRUCTIONS

Read these instructions carefully before installing the toilet seat

SYMBOLS

TECHNICAL SPECIFICATIONS

• C-C spacing 57-173 mm
• Colour Black

INSTALLATION

1. Assemble the screw and hinges, then insert these into the mounting holes on the toilet
2. Lift up the fitting and tighten the screw loosely.
3. Check that the lock nut is correctly located and loosely tightened.
4. Click the seat into place on the hinges.
5. Close the lid and adjust to the desired position.
6. Then disconnect the seat.
7. Tighten the screws and check that the nut is correctly located.
8. Press the protective covers onto the hinges.
9. Click the seat into place.
10. Your new toilet seat is now installed. FIG. S
11. Press.
12. Lift.

NOTE:

• The lid and the seat must not be forced down, as this will damage the self­closing mechanism.
• The lid is not intended to be sat on, and could break.

MAINTENANCE

CLEANING

• Use water and a mild non-abrasive detergent.
• Do not use strong chemicals.
• Do not use abrasive sponges etc.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>