HST ELECTRONIC HST-FM02 Smart Tag Finder User Guide
- September 24, 2024
- HST ELECTRONIC
Table of Contents
HST ELECTRONIC HST-FM02 Smart Tag Finder
Product Information
Specifications:
- Model: HST-FM02
- Product Name: Smart Tag Finder
- Battery: CR2032
Product Usage Instructions
Setting Up Your Smart Tag Finder:
- Choose a recognizable name and emoji for your HST-FM02 and tap Continue.
- Tap Finish, and your Smart Tag Finder will be set up and ready to be connected to whatever you wish to locate, e.g., your keys.
Replacing the Battery:
- Slide the opening slider on the back of your Smart Tag Finder to carefully open the shells.
- Replace the battery with a new CR2032 battery, ensuring the positive side is facing up.
Connecting Your Smart Tag Finder:
- Once HST-FM02 is located, tap Connect.
- Smart Tag Finder will ask for confirmation to add HST-FM02 to your Apple ID, tap Continue.
Resetting Your Smart Tag Finder:
- To factory reset your Smart Tag Finder, press the Smart Tag Finder’s function.
- Your Smart Tag Finder will now be reset and ready to be paired to a new iPhone or iPad.
Locating Your Smart Tag Finder:
- To find your Smart Tag Finder when it’s nearby, tap on it from the list in the app and tap Play Sound to make it beep.
- To find its last known location, open the app, select the Items tab, tap on your Smart Tag Finder from the list, and navigate to the location using Directions in the Apple Maps app.
Out of Range Notifications:
- To enable notifications when found or left behind, access the Notifications settings in the app and toggle Notify When Found or Notify When Left Behind accordingly.
Frequently Asked Questions (FAQ)
Q: What should I do if my Smart Tag Finder is lost?
If your Smart Tag Finder is lost, you can follow the steps to locate it using
the app or enable notifications for when it’s found by another Find-enabled
device.
Add Your Smart Tag Finder
Stat the APP: Open Find My™ on your supported iPhone or iPad and allow notifications from the APP .
Connect Smart Tag Finder
- Press the button to power on
- Select ” Items” tab, then tap ” Add Item”, and next tap ” Other supported items”,
- Once HST- FM02 Is located, tap ” Connect”
- Choose a recognizable name and emojl for your HST- FM02 and tap ” Continue “
- Smart Tag Finder will ask for confirmation to add HST- FM02 to your Apple ID , and tap ” Continue”
- Tap ” FInish ” and your Smart Tag Finder will be set up and ready to be connected to whatever Smart Tag Finder you wish to locate, e.g. your keys .
Resetting HST- FM02:
- Open APP and select ” Items ” tab
- Tap on your Smart Tag Finder from the list
- Please ensure ” Lost Mode ” is disabled,
- Scroll to the bottom of the screen and tap ” Remove Item”
- A summary will open, then tap ” Remove” to confirm.
Factory Reset Your Smart Tag Finder
- After successfully removing the Smart Tag Finder from app, press the Smart Tag Finder’s function button 4 times rapidly and then hold it a fifth time until you hear a ringing chime.
- The Smart Tag Finder is now reset and ready to be paired to a new iPhone or iPad
Locate Your Smart Tag Finder:
Find Smart Tag Finder when It’s Nearby:
- Open app and select the ” Items” tab,
- Tap on your Smart Tag Finder from the list
- Тар “Play Sound ” to make your Smart Tag Finder Beep
- Tap ” Stop Sound” to stop the beeps once you find it.
Find Smart Tag Finder’s last Known Location:
- Open app and select the “ ltems ” tab
- Tap on your Smart Tag Finder from the list ,
- Your Smart Tag Finder last known location will appear on the map4.
To navigate to that last known location , tap “ Direction ” to open the Apple Maps app
Find Smart Tag Finder Out of Range
—Enabling ” Notify When Left Behind “:
- Open app and select the ” Items” tab
- Tap on your Smart Tag Finder from the list.
- Under ” Notifications “enable the ” Notify When Left Behind ” toggle
- You will receive a notification when you leave your Smart Tag Finder behind and it’s no longer inrange of your device
-Enablina « Notify When Found “.
- Under ” Notifications “enable the ” Notify When Found ” toggle
- When your Smart Tag Finder is seen by another Find enabled device ,you will receive anotification of its updated location
- Note: ” Notify When Found ” can only be activated when yourSmart Tag Finder is out of range
When Your Smart Tag Finder Is Lost
Enabling ” Lost Mode”
- Open app and select the ” Items ” tab
- Tap on your Smart Tag Finder from the list
- Under ” Lost Mode ” tap ” Enable”
- A screen detailing Lost Mode will pop up, tap ” Continue “
- Enter your phone number or email address and tap ” Next”
- You may enter a message that will be shared with the person that finds your item,
- Tap ” Activate ” to enable ” Lost Mode”
- Note: When ” Lost Mode” is enabled, ” Notify When Found” is automatically enabled .
- Note: When ” Lost Mode” is enabled, your Smart Tag Finder is locked and cannot be pared to a new iPhone or iPad .
Extras
Replace The Battery
- Slide the opening slider on the back of your Smart Tag Finder to carefully open the shells.
- Replace the battery with a new CR2032 battery replacing it positive side up ( text facingup)
Unwanted Tracking
If any Find My network accessory separated from its owner is seen moving with
you over time, you’ll be notified in on of two ways :
- If you have an iPhone, iPad or iPod touch, Find My will send a notification to your Apple device. This feature is available on iOS or iPadOs 14.5 or later .
- If you don’t have an iOS device or a smartphone, Find My network accessory that isn’t with it’s owner for a period of time will emit a sound when it’s moved.
These features were created specifically to discourage people from trying to track you without your knowledge.
The Fine Print
This device complies with part 15 of the FCC Rules.Operation is subject to the following two conditions:(1)This device may not cause harmful interference, and (2) this device must accept any interference received including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes not expressly approved by the party responsible for compliance could void the users authority to operate this device. The device has been evaluated to meet general RF exposure requirement, The device can be used in portable exposure condition without restriction. Federal Communication Commission(FCC) Radiation Exposure Statement Power is so low that no RF exposure calculation is needed.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates us es and can radiate radio frequency energy and,if not installed and used in-accordance with the instructions,may cause harmful interference to radio communications. However,there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try to correct the interference by one or more of the following measures:Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into a n outlet on a circuit different from that to which the receiver is connected.
Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards. Use of the Works with Apple badge means that a product has been designed to work specifically with the technology identified in the badge and has been certified by the product manufacturer to meet Apple Find My network product specifications and requirements. Apple is not responsible for the operation of this device or use of this product or its compliance with safety and regulatory standards. Apple Find My,Apple Watch,Find My,iPhone,iPad, iPad OS,iPod touch, Mac,mac OS and Watch OS are trademarks of Apple Inc.lOS is a trademark of Cisco and is used under license .
FCC
Caution
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.