MAPerformance MAP WRX-4G-IN-AB Intake Airbox Instruction Manual
- June 8, 2024
- MAPerformance
Table of Contents
MAP WRX-4G-IN-AB Intake Airbox
Instruction Manual
What’s in the box?
1x MAP Air Box
1x Bracket
3x M6x12 Flanged Bolts
2x M6 Locknuts
2x Washers
Tools needed
You will need:
- 10mm socket
- 10mm wrench
- Phillips screwdriver
- Ratchet
- Various extensions
Step 1
Remove existing airbox/heat shield from the car, and remove oem filter bracket
Step 2
Install included bracket to airbox, securing using included hardware. Be sure
to place washers on the inside of the airbox.
Step 2.1
Install included bracket to airbox, securing using included hardware. Be sure
to place washers on the inside of the airbox.
Step 3
Slip MAP WRX airbox over filter, be sure the studs from the OEM filter bracket
key into the holes on the MAP airbox
Step 4
Install included 10mm bolt onto the vehicle, securing with the bracket
Step 5
Install OEM intake snorkel, securing with OEM push pins
We hope you enjoy your purchase! Reach out to us with any issues or concerns.
1-888-627-3736
@maperformance
support@maperformance.com
www.facebook.com/modernautomotiveperformance/
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>