MAPerformance MAP EVOX-PSR Power Steering Reservoir Instruction Manual

MAPerformance MAP EVOX-PSR Power Steering Reservoir

What’s in the box?

1x MAP Billet power steering tank assembled with all fittings and screen
2x M6 stainless hold-down Allen head flange bolts.

Tools needed

You will need:

• Needle nose pliers
• 5mm allen wrench
• 10mm socket

Step 1

Remove 2 10mm bolts holding factory power steering reservoir to the vehicle

Step 2

Remove upper power steering reservoir hose from the reservoir. If you own a fluid suction pump now would be the time to remove as much of the power steering fluid in the reservoir as possible

Step 3

Move reservoir to the side and remove the lower hose

Step 4

Attach lower hose to MAP evox power steering reservoir

Step 5

Attach upper hose to MAP evox power steering reservoir

Step 6

Attach MAP evox PSR to the factory reservoir mounting bracket using uncluded 5mm allen head bolts

Step 7

Fill PSR to the halfway point in the sightglass. It is important after install that you start the car, move the wheel side to side a few times and recheck the level to ensure the system is full

We hope you enjoy your purchase! Reach out to us with any issues or concerns.

1-888-627-3736
@maperformance
support@maperformance.com
www.facebook.com/modernautomotiveperformance/

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>