Glosen M8032 Medicine Lock Box with Combination Lock Instructions
- June 15, 2024
- Glosen
Table of Contents
Glosen M8032 Medicine Lock Box with Combination Lock
Setting the Combination Lock
Your medicine lock box has been set with a default security code of (0-0-0) from the factory. You may keep this code, however, for added security, we recommend that you re-set the combination using 3-digits of your choosing by using the following instructions:
Step 1: Open the box
All 3 dials should be set to ”000”. Slide the square button away from the
number dials and release the latch to open the box;
Step 2: Hold the button
Leave the latch open, now slide the square button towards the dials, and hold
this position while holding the button;
Step 3: Reset the code
Roll each number dial down until you reach your desired 3 digital code. Make
sure the digits are centered across the middle of lock assembly.
Note: Make a note of your personal combination and keep it at a safe place! You will only be able to reset the combination when the lock is open.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>